期刊
APPLIED MATHEMATICAL MODELLING
卷 37, 期 14-15, 页码 7778-7788出版社
ELSEVIER SCIENCE INC
DOI: 10.1016/j.apm.2013.03.002
关键词
Cavitation phenomenon; Diesel injection engines; Injection pressure; Spray penetration length
This paper investigates the fuel spray behavior and variation of the spray characteristics under different injection pressures in internal combustion engines. In diesel engines the fuel spray is affected by the cavitation phenomenon which occurs in the injector orifice. The cavitation is one of the important phenomena which has a significant effect on the fuel spray characteristics. In this paper, for a specified geometry of the nozzle and the combustion chamber, the effect of the cavitation phenomenon on the spray characteristics, i.e. spray penetration length, the Sauter main diameter and evaporation are studied numerically for different values of the injection pressures. High injection pressure causes high velocity of the fuel in the injector orifice which leads to an effective atomization process with small and dispersed fuel droplets. The fluid flow equations are calculated in the combustion chamber to obtain the spray model. Since it is known that, high injection pressure together with low discharge pressure leads to creation of cavitation phenomenon inside the injector orifice, then for having cavitation phenomenon inside the injector orifice and consequently for investigating the cavitation phenomenon effects on the spray characteristics, the injection pressure values of 10-150 MPa are considered while the discharge pressure remains constant. The injector and combustion chamber are simulated in separated regions and the results of the outlet of the nozzle are used as the boundary conditions for solving the fuel flow inside the combustion chamber to achieve the spray simulation. The results of this study show that by increasing the injection pressure, the value of the spray penetration length increases and the Sauter main diameter decreases for constant discharge pressure. The Hydraulic Flip phenomenon occurs after the injection pressure of 120 MPa on the base of the results of this work. (C) 2013 Elsevier Inc. All rights reserved.
作者
我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。
推荐
暂无数据