Re-use of water treatment works sludge to enhance particulate pollutant removal from sewage

This paper attempted to study the feasibility of reusing water treatment works sludge (alum sludge) to improve particulate pollutant removal from sewage. The main issues focused upon were: (1) the appropriate dosage of the alum sludge, (2) the appropriate operating conditions, and (3) the possible mechanisms for enhancement by adding alum sludge. Actual alum sludge and sewage were applied to a series of jar tests conducted under various conditions. It has been found that both the SS and COD removal efficiencies could be improved by the addition of the alum sludge, which was mainly attributed to the removal of relatively fine particles with a size of 48-200 mu m. The appropriate dosage of the alum sludge was determined to be 18-20 mg of Al/L. Increasing the mixing speed or reducing the floe size of the alum sludge enhanced the SS and COD removal and the dispersed alum sludge could remove particulate contaminants with smaller size than the raw sewage. ToF-SIMS evidence revealed that the aluminum species at the surface of the alum sludge were effectively utilized for improving the SS and COD removal. It was postulated that the sweep flocculation and/or the physical adsorption might play key roles in the enhancement of particulate pollutant removal from sewage. (c) 2005 Elsevier Ltd. All rights reserved.