Determination of trace elements in olive oil by ICP-AES and ETA-AAS: A pilot study on the geographical characterization

The determination of trace elements in edible oils is important because of both the metabolic role of metals and possibilities for adulteration detection and oil characterization. The most commonly used techniques for the determination of metals in oil samples are inductively coupled plasma atomic emission spectrometry (ICP-AES) and atomic absorption spectrometry (AAS). For this study, a microwave assisted decomposition of the olive oil in closed vessels using a mixture of nitric acid and hydrogen peroxide was applied as sample preparation. The low achievable LODs enable the determination by ICP-AES of even very low concentrations of most elements of interest. The proposed ICP-AES method permits the determination of Ca, Fe, Mg, Na, and Zn in olive oils. Elements present in small amounts (Al, Co, Cu, K, Mn, Ni) were measured by ETA-AAS in the same sample digest. The concentrations of Al, Co, Cu, K, Mn, and Ni were in the range from 0.15 to 1.5 mu g/g and differ according to the geographical origin of the oils. For the amounts of Fe, Mg, Na, and Zn in the samples, no significant differences according to the geographical origin of the oils could be observed, the mean concentrations being 15.31, 3.26, 33.10, and 3.39 mu g/g, respectively. The Ca content varies in the range of 1.3 to 9.0 mu g/g. The dependency of the trace elemental content of olive oils on their geographical origin can be used for their local characterization. (c) 2005 Elsevier B.V All rights reserved.