Reversible Daptomycin Tolerance of Adherent Staphylococci in an Implant Infection Model

Daptomycin (DAP) is bactericidal against methicillin-resistant Staphylococcus aureus (MRSA) in vitro, but it failed to eradicate MRSA in an experimental model of implant-associated infection. We therefore investigated various factors which could explain treatment failure by evaluating DAP activity, including the role of different cell wall components, adherence, biofilm, and calcium ions (Ca(2+)) in vitro and in vivo. In the tissue cage infection model, DAP was active only prophylactically and against low inocula. To identify the mechanisms of treatment failure, the in vitro activity of DAP against planktonic and adherent growing S. aureus and S. epidermidis mutants, differing in their capacity of biofilm formation and adherence, was determined. For planktonic staphylococci, the MIC was 0.625 mu g/ml. For adherent staphylococci, DAP reduced biofilms at 30 mu g/ml. However, it did not kill adherent bacteria up to 500 mu g/ml, independent of biofilm biosynthesis (the ica mutant strain), nuclease (the nuc1/nuc2 mutant strain), LPXTG-anchored adhesin (the srtA mutant strain), autolysin (the atl mutant strain), or alanyl-LTA (the dltA mutant strain). Resistance of adherent staphylococci was not due to mutations of adherent bacteria, since staphylococci became DAP susceptible after detachment. Phenotypic tolerance was not explained by inactivation of DAP or inability of initial Ca(2+)-DAP complex formation. However, the addition of up to 100 mg/liter (2.5 mmol/liter) Ca(2+) gradually improved bactericidal activity toward adherent staphylococci in vitro and increased the prevention rate in the cage model from 40% to 60%. In summary, adherent staphylococci are resistant to DAP killing unless Ca(2+) is supplemented to physiologic concentrations.