Thermo-mechanical model with adaptive boundary conditions for friction stir welding of Al 6061

Thermo-mechanical simulation of friction stir welding can predict the transient temperature field, active stresses developed, forces in all the three dimensions and may be extended to determine the residual stress. The thermal stresses constitute a major portion of the total stress developed during the process. Boundary conditions in the thermal modeling of process play a vital role in the final temperature profile. The heating and cooling rates with the peak temperature attained by the workpiece determine the thermal stress. Also, predicting realistic peak temperature becomes important as the operating temperature at the interface of tool-workpiece is very close to the solidus temperature of the aluminum workpiece. The convection heat-transfer coefficients of the surfaces exposed to air can be theoretically determined using Newton's law of cooling. Contact conductance depends on the pressure at the interface and has a non-uniform variation. The actual pressure distribution along the interface is dependent on the thermal stress from local temperature and non-linear stress-strain state. Therefore, applying an adaptive contact conductance can make the model more robust for process parameter variations. A finite element thermo-mechanical model with mechanical tool loading was developed considering a uniform value for contact conductance and used for predicting the stress at the workpiece and backplate interface. This pressure distribution contours are used for defining the non-uniform adaptive contact conductance used in the thermal model for predicting the thermal history in the workpiece. The thermo-mechanical model was then used in predict stress development in friction stir welding. (c) 2005 Elsevier Ltd. All rights reserved.