相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Steel-Based Composites: Driving Forces and Classifications
David Embury et al.
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 40 (2010)
In situ flow stress of pure aluminium constrained by tightly packed alumina fibres
Andreas Rossoll et al.
ACTA MATERIALIA (2009)
In situ Study of Internal Load Transfer in a Novel Metal/Ceramic Composite Exhibiting Lamellar Microstructure Using Energy Dispersive Synchrotron X-ray Diffraction
Siddhartha Roy et al.
ADVANCED ENGINEERING MATERIALS (2009)
3D-Quantification of the distribution of continuous fibres in unidirectionally reinforced composites
Guillermo Requena et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)
Effect of interfacial bonding strength on tensile ductility of multilayered steel composites
S. Nambu et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2009)
Ductile-to-brittle transition in tensile failure of particle-reinforced metals
Aude Hauert et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2009)
Quasi-static and high strain rate properties of a cross-ply metal matrix composite
I. W. Hall et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
X-ray micro-computed tomography of beech wood and biomorphic C, SiC and Al/SiC composites
T. E. Wilkes et al.
PHILOSOPHICAL MAGAZINE (2009)
Synthesis of high-strength magnesium alloy composites reinforced with Si-coated carbon nanofibres
T. Honma et al.
SCRIPTA MATERIALIA (2009)
Tensile flow stress of ceramic particle-reinforced metal in the presence of particle cracking
R. Mueller et al.
ACTA MATERIALIA (2008)
Mechanisms and kinetics of MgB2 synthesis from boron fibers
John D. DeFouw et al.
ACTA MATERIALIA (2008)
Experimental models for activtation mechanism of pressureless infiltration in the non-wetting steel-alumina MMC system
Srdan Vasic et al.
ADVANCED ENGINEERING MATERIALS (2008)
Metal/ceramic composites from freeze-cast ceramic preforms: Domain structure and elastic properties
Siddhartha Roy et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2008)
Modeling of the thermal conductivity and thermomechanical behavior of diamond reinforced composites
Sergio Nogales et al.
INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE (2008)
Mechanical properties of wood-derived silicon carbide aluminum-alloy composites as a function of temperature
T. E. Wilkes et al.
JOURNAL OF MATERIALS RESEARCH (2008)
Hot isostatic pressing synthesis and mechanical properties of Al/Al-Cu-Fe composite materials
T. El Kabir et al.
JOURNAL OF MATERIALS RESEARCH (2008)
Production and mechanical properties of metallic glass-reinforced Al-based metal matrix composites
S. Scudino et al.
JOURNAL OF MATERIALS SCIENCE (2008)
Indentation mechanics and fracture behavior of metal/ceramic nanolaminate composites
N. Chawla et al.
JOURNAL OF MATERIALS SCIENCE (2008)
The strength limit in a bio-inspired metallic nanocomposite
Nils C. Broedling et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2008)
Experimental and simulation investigations of tensile response of (Al2O3f/Al)w/2024Al composite
Wenlong Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Fifth International Conference on High Temperature Capillarity HTC-2007, Alicante, Spain Preface
Enrique Louis et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Fabrication process of carbon nanotube/light metal matrix composites by squeeze casting
Hisao Uozumi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Overall plasticity of micropolar composites with interface effect
Huan Chen et al.
MECHANICS OF MATERIALS (2008)
Measurement of damage evolution in continuous ceramic fibre-reinforced metals by acoustic emission
A. Rossoll et al.
SCRIPTA MATERIALIA (2008)
Fast X-ray tomography and acoustic emission study of damage in metals during continuous tensile tests
Eric Maire et al.
ACTA MATERIALIA (2007)
Effect of diamond shapes and associated thermal boundary resistance on thermal conductivity of diamond-based composites
J. Flaquer et al.
COMPUTATIONAL MATERIALS SCIENCE (2007)
Alternative anode materials for solid oxide fuel cells
John B. Goodenough et al.
JOURNAL OF POWER SOURCES (2007)
Micromechanics of elasto-plastic materials reinforced with ellipsoidal inclusions
O. Pierard et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2007)
Microstructure-based modeling of the influence of particle spatial distribution and fracture on. crack growth in particle-reinforced composites
A. Ayyar et al.
ACTA MATERIALIA (2007)
Recent anode advances in solid oxide fuel cells
Chunwen Sun et al.
JOURNAL OF POWER SOURCES (2007)
Synthesis and mechanical behavior of carbon nanotube-magnesium composites hybridized with nanoparticles of alumina
Sanjay Kumar Thakur et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Bulk metallic glass-graphite composites
Marco E. Siegrist et al.
SCRIPTA MATERIALIA (2007)
Virtual fracture testing of composites: A computational micromechanics approach
Carlos Gonzalez et al.
ENGINEERING FRACTURE MECHANICS (2007)
Assessing predictive schemes for thermal conductivity against diamond-reinforced silver matrix composites at intermediate phase contrast
R. Tavangar et al.
SCRIPTA MATERIALIA (2007)
Alloying effects on microstructure and mechanical properties of high volume fraction SiC-particle reinforced Al-MMCs made by squeeze casting infiltration
Olivier Beffort et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2007)
Strengthening mechanisms in aluminum containing coherent Al3Sc precipitates and incoherent Al2O3 dispersoids
Richard A. Karnesky et al.
ACTA MATERIALIA (2007)
Numerical simulation of the fracture behavior of Ti/SiC composites between 20 degrees C and 400 degrees C
Carlos Gonzalez et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2007)
The 3-D analysis of discontinuously reinforced aluminum composite microstructures
Jonathan E. Spowart
JOM (2006)
Microstructure, indentation and work hardening of Cu/Ag multilayers
M. Verdier et al.
PHILOSOPHICAL MAGAZINE (2006)
Aluminium metal matrix composites based on biomorphic silicon carbide
Andreas Herzog et al.
ADVANCED ENGINEERING MATERIALS (2006)
Multiscale modeling of fracture in fiber-reinforced composites
Carlos Gonzalez et al.
ACTA MATERIALIA (2006)
Computational micromechanics of composites: The effect of particle spatial distribution
J Segurado et al.
MECHANICS OF MATERIALS (2006)
Microstructural characterization and modeling of discontinuously-reinforced aluminum composites
Jonathan E. Spowart
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Estimation of the effective properties of particle-reinforced metal-matrix composites from microtomographic reconstructions
A. Borbely et al.
ACTA MATERIALIA (2006)
Plasticity of multiscale nanofilamentary Cu/Nb composite wires during in situ neutron diffraction: Codeformation and size effect
L Thilly et al.
APPLIED PHYSICS LETTERS (2006)
Effect of matrix hardening on the tensile strength of alumina fiber-reinforced aluminum matrix composites
T Okabe et al.
ACTA MATERIALIA (2006)
Simplified prediction of the monotonic uniaxial stress-strain curve of non-linear particulate composites
Randoald Mueller et al.
ACTA MATERIALIA (2006)
Influence of fiber's shape and size on overall elastoplastic property for micropolar composites
HS Ma et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2006)
Three-dimensional visualization and micro structure-based modeling of deformation in particle-reinforced composites
N Chawla et al.
ACTA MATERIALIA (2006)
Increasing the strength/toughness combination of high volume fraction particulate metal matrix composites using an Al-Ag matrix alloy
A Miserez et al.
ADVANCED ENGINEERING MATERIALS (2006)
Freezing as a path to build complex composites
S Deville et al.
SCIENCE (2006)
Engineering porous materials for fuel cell applications
NP Brandon et al.
PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2006)
Metal matrix composites - From science to technological significance
DB Miracle
COMPOSITES SCIENCE AND TECHNOLOGY (2005)
Damage accumulation during cyclic loading of a continuous alumina fibre reinforced aluminium composite
B Moser et al.
SCRIPTA MATERIALIA (2005)
An experimental study on the effect of damage on the stress-strain behaviour for Al-Si model composites
WJ Poole et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
A computational micromechanics study of the effect of interface decohesion on the mechanical behavior of composites
J Segurado et al.
ACTA MATERIALIA (2005)
Equal channel angular pressing of metal matrix composites: Effect on particle distribution and fracture toughness
I Sabirov et al.
ACTA MATERIALIA (2005)
Homogenization of metal matrix composites by high-pressure torsion
I Sabirov et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2005)
Effects of particle arrangement on stress concentrations in composites
CJ Sun et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
A tri-modal aluminum based composite with super-high strength
J Ye et al.
SCRIPTA MATERIALIA (2005)
Size effects in metal matrix composites
S Groh et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Stress and strain localization three-dimensional modeling for particle-reinforced metal matrix composites
H Shen et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2005)
Crossover behavior in a mixed-mode fiber bundle model
S Pradhan et al.
PHYSICAL REVIEW E (2005)
The determination of the local conditions for void initiation in front of a crack tip for materials with second-phase particles
I Sabirov et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
On the capabilities of mean-field approaches for the description of plasticity in metal matrix composites
JL Chaboche et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2005)
Fracture of aluminium reinforced with densely packed ceramic particles: link between the local and the total work of fracture
A Miserez et al.
ACTA MATERIALIA (2004)
Three-dimensional characterization of the microstructure of a metal-matrix composite by holotomography
A Borbély et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Three-dimensional multiparticle cell simulations of deformation and damage in sphere-reinforced composites
J LLorca et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
The effect of matrix to reinforcement particle size ratio (PSR) on the microstructure and mechanical properties of a P/M processed AlCuMn/SiCp MMC
A Slipenyuk et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Toughness of fiber-reinforced titanium as a function of temperature:: experimental results and micromechanical modeling
C González et al.
ACTA MATERIALIA (2004)
Particle reinforced metals of high ceramic content
A Miserez et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Numerical simulation of elasto-plastic deformation of composites:: evolution of stress microfields. and implications for homogenization models
C González et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2004)
Three-dimensional (3D) microstructure visualization and finite element modeling of the mechanical behavior of SiC particle reinforced aluminum composites
N Chawla et al.
SCRIPTA MATERIALIA (2004)
Investigation of crack-tip plasticity in high volume fraction particulate metal matrix composites
A Miserez et al.
ENGINEERING FRACTURE MECHANICS (2004)
A model for damage coalescence in heterogeneous multi-phase materials
J Gammage et al.
ACTA MATERIALIA (2004)
Fracture of aluminium reinforced with densely packed ceramic particles: influence of matrix hardening
A Miserez et al.
ACTA MATERIALIA (2004)
Damage initiation in model metallic materials:: X-ray tomography and modelling
L Babout et al.
ACTA MATERIALIA (2004)
The influence of reinforcement morphology on the tensile response of 6061/SiC/25p discontinuously-reinforced aluminum
JE Spowart et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
A numerical investigation of the effect of particle clustering on the mechanical properties of composites
J Segurado et al.
ACTA MATERIALIA (2003)
Microstructural analysis of alumina chromium composites by X-ray tomography and 3-D finite element simulation of thermal stresses
G Geandier et al.
SCRIPTA MATERIALIA (2003)
Cellular ceramics: Intriguing structures, novel properties, and innovative applications
DJ Green et al.
MRS BULLETIN (2003)
Homogenization of two-phase elasto-plastic composite materials and structures - Study of tangent operators, cyclic plasticity and numerical algorithms
I Doghri et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2003)
Alumina-aluminum interpenetrating-phase composites with three-dimensional periodic architecture
CS Marchi et al.
SCRIPTA MATERIALIA (2003)
A numerical approximation to the elastic properties of sphere-reinforced composites
J Segurado et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2002)
Multi-inclusion unit cell models for metal matrix composites with randomly oriented discontinuous reinforcements
HJ Böhm et al.
COMPUTATIONAL MATERIALS SCIENCE (2002)
Mechanical properties of nickel silicon carbide nanocomposites
AF Zimmerman et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2002)
On the accuracy of mean-field approaches to simulate the plastic deformation of composites
J Segurado et al.
SCRIPTA MATERIALIA (2002)
Size dependent strengthening in particle reinforced aluminium
M Kouzeli et al.
ACTA MATERIALIA (2002)
Influence of damage on the tensile behaviour of pure aluminium reinforced with ≥40 vol. pct alumina particles
M Kouzeli et al.
ACTA MATERIALIA (2001)
Micromechanical modelling of deformation and failure in Ti-6Al-4V/SiC composites
C González et al.
ACTA MATERIALIA (2001)
Characterization by X-ray computed tomography of decohesion, porosity growth and coalescence in model metal matrix composites
L Babout et al.
ACTA MATERIALIA (2001)
Multiscale modeling of failure in metal matrix composites
Z Xia et al.
ACTA MATERIALIA (2001)
A synchrotron X-ray study of a Ti/SiCf composite during in situ straining
E Maire et al.
ACTA MATERIALIA (2001)
Infiltration processing of fibre reinforced composites: governing phenomena
V Michaud et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2001)
Micromechanics-based deformation and failure prediction for longitudinally reinforced titanium composites
BA Bednarcyk et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2001)
Microstructural and mechanical characteristics of in situ metal matrix composites
SC Tjong et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2000)
A self-consistent approach to the elasto-plastic behaviour of two-phase materials including damage
C González et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2000)
Micromechanical simulation of the failure of fiber reinforced composites
CM Landis et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2000)
分享论文
