Measuring the trace elemental composition of size-resolved airborne particles

A new method to measure the trace elemental composition of size-resolved airborne particles that uses acetone extraction followed by ICPMS analysis is compared to three other established methods: copper anode XRF, molybdenum anode XRF, and an ICPMS method that uses HF digestion. The method detection limit (MDL), accuracy, and precision of each method is studied through the analysis of ambient samples collected in California. The MDLs of the new acetone-ICPMS method are similar to MDLs for the established HF-ICPMS method. Both sets of ICPMS MDLs are 1-3 orders of magnitude lower than XRF MDLs for approximately 50 elements other than the light crustal elements such as silicon, sulfur, calcium, and zinc. The accuracy of the acetone-ICPMS method was verified by comparison to measurements made using ion chromatography and the HF-ICPMS method. The acetone-ICPMS analysis method was more precise than the conventional HF-ICPMS method for collocated measurements. Both ICPMS methods were more precise than XRF for most elements. The size distribution of 21 elements contained in ambient particles collected with cascade impactors could be measured with good precision using the new acetone-ICPMS analysis method: lithium, sulfur, potassium, titanium, vanadium, manganese, iron, gallium, germanium, arsenic, selenium, bromine, rubidium, strontium, cadmium tin, antimony, barium, thallium, lead, and bismuth. It is likely that the size distribution of an additional 9 elements could also be measured when concentrations are sufficiently high: phosphorus, molybdenum, niobium, palladium, cesium, europium, holmium, platinum, and uranium. None of the conventional methods were able to measure the size distribution of these elements with acceptable precision under the conditions studied. The new acetone-ICPMS method should provide useful data for the study of the health effects of airborne particles.