Photoelectrochemical oxidation of methanol on oxide nanosheets

Photoelectrochemical oxidation of alcohol on various nanosheet electrodes such as Nb6O17, Ca2Nb3O10, Ti0.91O2, Ti4O9, and MnO2 system host layers were measured to evaluate the photocatalysis of water photolysis with alcohol as a sacrificial agent. The nanosheet electrodes were prepared by the layer-by-layer (LBL) method, using electrostatic principles. The highest photooxidation current density was observed in methanol solution for Nb6O17 and Ca2Nb3O10 nanosheets, while the density was lower for Ti0.91O2, Ti4O9, and MnO2 nanosheets in decreasing order. The rank in the photocurrent density was in agreement with that in the photocatalytic activity, which means that the degree of photooxidation of the alcohol determines the activity of the alcohol in the water photolysis process. The photocurrent was independent of the number of nanosheet layers on the electrode, indicating that only the mono-nanosheet layer attached directly on a substrate acts as a photoelectrocatalyst and that the interlayer space is not important. Consequently, higher photooxidation current on the Nb6O17 mono-nanosheet layer means that the charge separation of electron and hole under illumination is very large and that the hole-capturing process by CH3OH is very quick compared with the surface recombination on the Nb6O17 nanosheet. The adsorption of a transition metal cation on the nanosheet acted as the surface recombination center, because the photocurrent decreased after the adsorption. The photocatalytic mechanism has been discussed in detail in terms of various photoelectrochemical behaviors.