Use of copper cast alloys to control Escherichia coli O157 cross-contamination during food processing

The most notable method of infection from Escherichia coli O157 (E. coli O157) is through contaminated food products, usually ground beef. The objective of this study was to evaluate seven cast copper alloys (61 to 95% Cu) for their ability to reduce the viability of E. coli O157, mixed with or without ground beef juice, and to compare these results to those for stainless steel. E. coli O157 (NCTC 12900) (2 X 10(7) CFU) mixed with extracted beef juice (25%) was inoculated onto coupons of each copper cast alloy or stainless steel and incubated at either 22 degrees C or 4 degrees C for up to 6 h. E. coli O157 viability was determined by plate counts in addition to staining in situ with the respiratory indicator fluorochrome 5-cyano-2,3-ditolyl tetrazolium. Without beef extract, three alloys completely killed the inoculum during the 6-h exposure at 22 degrees C. At 4 degrees C, only the high-copper alloys (> 85%) significantly reduced the numbers of O157. With beef juice, only one alloy (95% Cu) completely killed the inoculum at 22 degrees C. For stainless steel, no significant reduction in cell numbers occurred. At 4 degrees C, only alloys C83300 (93% Cu) and C87300 (95% Cu) significantly reduced the numbers of E. coli O157, with 1.5- and 5-log kills, respectively. Reducing the inoculum to 10(3) CFU resulted in a complete kill for all seven cast copper alloys in 20 min or less at 22 degrees C. These results clearly demonstrate the antimicrobial properties of cast copper alloys with regard to E. coli O157, and consequently these alloys have the potential to aid in food safety.