Versatility of biodegradable poly(D,L-lactic-co-glycolic acid) microspheres for plasmid DNA delivery

In this study, we have optimized different formulations of DNA encapsulated into PLGA microspheres by correlating the protocol of preparation and the molecular weight and composition of the polymer, with the main characteristics of these systems in order to design an efficient non-viral gene delivery vector. For that, we prepared poly((D),(L)-lactic-co-glycolic acid) (PLGA) microparticles with an optimized water-oil-water double emulsion process, by using several types of polymers (RG502, RG503, RG504, RG502H and RG752), and characterized in terms of size, zeta potential, encapsulation efficiency (EE%), morphology, DNA conformation, release kinetics, plasmid integrity and erosion. The size of the particles ranged between 0.7 and 5.7 mu m depending on the protocol of formulation and the molecular mass of the polymer used. The microspheres prepared by using in their formulation polymers of high molecular weight (RG503 and RG504) were bigger in size than in the case of using a lower molecular weight polymer (RG502). The EE (%) of plasmid DNA increased with increasing the molecular mass of the polymer and by using the most hydrophilic polymer RG502H, which contains terminal acidic groups in its structure. The plasmid could be encapsulated without compromising its structural and functional integrity. Also a protective effect of PLGA on endonuclease digestion is observed. Plasmid DNA release from microspheres composed of low molecular weight or hydrophilic polymers, like RG502H, was faster than from particles containing high molecular weight or hydrophobic polymers. These PLGA microspheres could be an alternative to the viral vectors used in gene therapy, given that may be used to deliver genes and other bioactive molecules, either very rapidly or in a controlled manner. (c) 2006 Elsevier B.V. All rights reserved.