Feasibility study of using brick made from municipal solid waste incinerator fly ash slag

This study deals with the effect of MSWI slag on fired clay bricks. Brick samples were heated to temperatures which varied from 800 to 1000 degrees C for 6h, with a heating rate of 10 degrees C/min. The material properties of the resultant material then determined, including speciation variation, loss on ignition, shrinkage, bulk density, 24-h absorption rate and compressive strength. Toxicity Characteristic Leaching Procedure tests were also conducted. The results indicate that the heavy metal concentrations in the leachates met the current regulatory thresholds. Increasing the amount of MSWI slag resulted in a decrease in the water absorption rate and an increase in the compressive strength of the MSWI-slag bricks. The 24-h absorption rate and compressive strength of the MSWI-slag brick made from samples containing slag sintered at 1000 degrees C all met the Chinese National Standard (CNS) building requirements for second-class brick. The addition of MSWI slag to the mixture reduced the degree of firing shrinkage. This indicates that MSWI slag is indeed suitable for the partial replacement of clay in bricks. (c) 2006 Elsevier B.V. All rights reserved.