Electronic conductivity and chemical diffusion in n-conducting barium titanate ceramics at high temperatures

The electronic conductivity as well as the chemical diffusion coefficient of barium titanate ceramics doped with Y and Mn (donor-doped and acceptor co-doped) have been determined by application of conductivity relaxation experiments. The equilibrium values of the electronic conductivity of n-conducting BaTiO3 have been analyzed by application of a defect chemical model involving electrons and cation vacancies as the predominant defect species at oxidizing conditions (fairly high oxygen partial pressures). The relaxation curves of the electronic conductivity yield the chemical diffusion coefficient of the bulk by employing a spherical grain model where the appropriate diffusion length is the radius of grains (average grain size). The conductivity relaxation experiments have been performed as a function of temperature ranging from 1100 to 1250 degrees C at oxygen partial pressures between 0.01 and 1 bar. The kinetics of the oxygen exchange process can be interpreted in terms of extremely fast diffusion of oxygen via oxygen vacancies along the grain boundaries and slow diffusion of Ti (cation)-vacancies from the grain boundaries into the grains. The Ti-vacancy diffusion coefficients were extracted from the chemical diffusion coefficients as a function of temperature. Typical values for the Ti-vacancy diffusivity are around 10(-15) cm(2) s(-1) with an activation energy of 3.9 +/- 0.7 eV. (c) 2006 Elsevier B.V. All rights reserved.