Orientation relationship, habit plane, twin relationship, interfacial structure, and plastic deformation resulting from the δ→α′ isothermal martensitic is transformation in Pu-Ga alloys

The orientation relationship, habit plane, parent-product interface at the atomic level, twin relationship, and plastic deformation resulting from the delta -> alpha' isothermal martensitic transformation in Pu-Ga alloys are examined using optical microscopy, transmission electron microscopy (TEM), and finite element calculations. The delta -> alpha' transformation exhibits a similar to 20 vol pct collapse when the fcc delta phase transforms to the monoclinic alpha' phase, which results in unique and intriguing crystallography and morphology. Here, we show that the orientation relationship is very close to that previously reported by Zocco et al. (1990), but has small rotational misalignments between the two phases both parallel and perpendicular to the [110](delta) vertical bar vertical bar [100]alpha', direction. The amount of plastic deformation is exceedingly large due to the similar to 20 Vol pct collapse, and TEM is used to quantify the difference in dislocation density between untransformed delta matrix and regions of delta adjacent to the transformed alpha'. The twins contained in alpha' plates are shown to have a (205)(alpha) orientation as the lattice invariant deformation and are found to be composed of two alternating variants that share a common < 020 > (alpha)' direction, but differ by a 60 deg rotation about < 020 > (alpha)'. A combination of electron diffraction and optical microscopy has been employed to examine the macroscopic habit plane, and the analysis suggests that a large fraction of the observed habit planes are on or near {111}(delta). Finally, high resolution TEM reveals that the interface is faceted on {111}(delta) exhibiting a series of terrace and ledges.