Horizontal and vertical distribution of saproxylic beetles (Col., Buprestidae, Cerambycidae, Scolytinae) across sections of forest edges

We evaluated the preferred home ranges of three saproxylic beetle taxa along transects from the open field into the forest interior, and from the forest floor up to the canopy. By means of trap sets on metal scaffolds, vertical and horizontal strata were sampled across two types of forest edges: soft-edge ecotones with a gradual transition from the field into the forest and hard edges with an abrupt transition. The forest edges consisted of different strata such as herbaceous fringe, shrub belt, unmanaged forest and managed forest. The thermophilic buprestids were mainly caught in the open land (herbaceous fringe and agricultural land) and in the upper forest mantle. In general, the cerambycids were most abundant in the open land and the lower forest mantle, but a few species favoured the forest interior. The bark beetles (Scolytinae) were equally distributed in all habitats. These distribution patterns of the taxa were observed in terms of both species numbers and abundances. Each species with at least five collected specimens was assigned to one of the three habitat types: open land, forest mantle and forest interior. Of 74 ranked species, only 16% were prevalent in the forest interior and are thus considered to be true forest species. The other 84% of the species were attributed to open land or the forest mantle and are, therefore, forest edge species. Soft forest edges generally supported a higher species richness than hard edges, particularly as regards Cerambycidae and Scolytinae. In terms of Shannon diversity, soft edges tended to be more diverse in buprestids and cerambycids. Overall, the forest interior showed the least species richness and diversity. Therefore, for the conservation of saproxylic beetles, not only the amount and quality of dead wood is important, but also the presence and design of forest boundary structures.