Recycled aggregate concrete as structural material

The use of recycled aggregates in concrete opens a whole new range of possibilities in the reuse of materials in the building industry. The utilisation of recycled aggregates is a good solution to the problem of an excess of waste material, provided that the desired final product quality is reached. The studies on the use of recycled aggregates have been going on for 50 years. In fact, none of the results showed that recycled aggregates are unsuitable for structural use. However, some hypothetical problems related to durability aspects resulted in recycled aggregates being employed practically only as base filler for road construction. This paper focuses on the possibility of the use of recycled aggregate concrete as a structural material. For that purpose an experimental study of the shear behaviour and strength of beams made with recycled aggregate concrete was studied. Twelve beam specimens with the same compression strength, four concrete mixtures using different percentages of recycled coarse aggregates (0%, 25%, 50% and 100%) and three different transverse reinforcement arrangements were cast and tested up to failure. Analytical predictions of the experimental results were carried out using a numerical model based on the modified compression field theory and simplified models such as those proposed by Cladera & Mari, the Canadian standard CSA and the Eurocode-2. The results obtained indicate that a substitution of less than 25% of coarse aggregate, scarcely affects the shear capacity of RC beams, provided that all measures related to dosage and durability aspects have been adopted.