Dispersive liquid-liquid microextraction followed by reversed phase-high performance liquid chromatography for the determination of polybrominated diphenyl ethers at trace levels in landfill leachate and environmental water samples

A simple, rapid and efficient method, dispersive liquid-liquid microextraction (DLLME), has been developed for the extraction and preconcentration of polybrominated diphenyl ethers (PBDEs) in water samples. The factors influencing microextraction efficiencies, such as the kind and volume of extraction and dispersive solvent, the extraction time and the salt effect, were optimized. Under the optimum conditions (sample volume: 5 mL; extraction solvent: tetrachloroethane, 20.0 mu L; dispersive solvent: acetonitrile, 1.00 mL; extraction time: below 5 s and without salt addition), the enrichment factors and extraction recoveries were high and ranged from 268 to 305 and 87.0 to 119.1%, respectively Linearity was observed in the range 0.05-50 ng mL(-1) for BDE-28 and BDE-99, and 0.1-100 ng mL(-1) for BDE-47 and BDE-209, respectively Coefficients of correlation (r(2)) ranged from 0.9995 to 0.9999. The repeatability study was carried out by extracting the spiked water samples at concentration levels of 50 ng mL(-1) for BDE-28 and BDE-99, and 100 ng mL(-1) for BDE-47 and BDE-209, respectively The relative standard deviations (R.S.D.s) varied between 3.8 and 6.3% (n = 5). The limits of detection (LODs), based on signal-to-noise ratio (S/N) of 3, ranged from 12.4 to 55.6 pg mL(-1) (the wavelength of detector at 226 run). The relative recoveries of PBDEs from tap, lake water and landfill leachate samples at spiking levels of 5, 10 and 50 ng mL(-1) were in the range of 89.7-107.6%, 114.3-119.1% and 87.0-90.9%, respectively As a result, this method can be successfully applied for the determination of PBDEs in landfill leachate and environmental water samples. (C) 2008 Elsevier B.V. All rights reserved.