Paclitaxel distribution in poly(ethylene glycol)/poly(lactide-co-glycolic acid) blends and its release visualized by coherent anti-Stokes Raman scattering microscopy

Mechanisms underlying the release of paclitaxel (PTX) from poly(ethylene glycol)/poly(lactic-co-glycolic acid) (PEG/PLGA) blends were investigated by coherent anti-Stokes Raman scattering (CARS) microscopy. PLGA, PEG, and PTX were selectively imaged by using the resonant CARS signal from the CH3, CH2, and aromatic CH stretch vibrations, respectively. Phase segregation was observed in PLGA films containing 10 to 40 wt.% PEG in the absence of PTX loading. The PEG phase existed in the form of crystalline fibers in the (8:2, weight ratio) and (7:3) PLGA/ PEG films. CARS observation indicated that PTX preferentially partitioned into the PEG domains in the (9:1) and (8:2) PLGA/PTX films, but exhibited a uniform mixing with both PLGA and PEG in the (7:3) PLGA/PEG film. The solid dispersion of PTX into PEG domains was attributed to a strong interaction between PTX and PEG, supported by the disappearance of PEG crystallization in the PTX-loaded PLGA/PEG film evidenced through X-ray diffraction analysis. PTX release was induced by exposing the film to an aqueous solution and monitored in real time by CARS and two-photon fluorescence microscopy. Fast dissolution of both PEG and PTX was observed at the film surface. Upon infiltration of water into the film, the PEG domains were rearranged into ring structures enriched by both PTX and PEG. The CARS data provided visual evidence explaining the accelerated burst release followed by more sustained release of PTX from the PLGA/PEG films as measured by HPLC. (c) 2007 Elsevier B.V. All rights reserved.