Injection molded solid and microcellular polylactide compounded with recycled paper shopping bag fibers

Recycled paper shopping bag fibers were melt-compounded using a batch mixer with biobased/biodegradable polylactide (PLA) at 10 and 30 wt.% using silane as a coupling agent. These PLA/fiber composites were then injection molded to produce both solid and microcellular tensile bars. The mechanical properties (specific modulus, specific tensile strength, specific toughness, and strain at break) of the neat PLA and PLA composites were tested and the cell morphology of the microcellular samples was examined using scanning electron microscopy. It was observed that the addition of the recycled paper shopping bag fibers resulted in an increase in cell density and decrease in average cell size for the microcellular components when compared with the neat PLA. The addition of the fibers increased the specific modulus of both solid and microcellular components, and high fiber contents (30 wt.%) resulted in an increase in specific tensile strength, yet yielded a decrease in the strain at break and specific toughness. The storage modulus was also improved with the addition of 10 and 30 wt.% fibers for both solid and microcellular components.