期刊
ADVANCED POWDER TECHNOLOGY
卷 20, 期 4, 页码 310-317出版社
ELSEVIER SCIENCE BV
DOI: 10.1016/j.apt.2008.12.002
关键词
Dye-sensitized solar cell; Single-walled carbon nanotubes; Nanocrystalline TiO2; FTO-glass substrate; N-719 (ruthenium) dye
资金
- National Science Council, ROC, Taiwan [NSC 96-2218-E-002-004]
- Ministry of Education, ROC, Taiwan
- National Nano Device Laboratories [P-96-213-016]
In this study, two types of the counter electrode were designed and fabricated for the dye-sensitized solar cell (DSSC): (1) one had a layer of SWCNT/Ag on the FTO-glass (Fluorine doped tin oxide, SnO2:F) substrate; (2) the other had a layer Ag sandwiched between a layer of SWCNT and the FTO-glass substrate. This study also examined the effects of the mass ratio of SWCNT to Ag-paste, the surfactant (such as TCAB), the type of FTO-glass substrate, and the sintering temperature of preparing the counter electrode on the short-circuit photocurrent and the open-circuit photovoltage of the DSSC. At a fixed sintering temperature of 150 degrees C and a fixed FTC-glass substrate of 8 Omega/sq, this film of SWCNT markedly increased the short-circuit photocurrent from 227.3 mu A (conventional DSSC without a layer of SWCNT) to 1033.5 mu A (DSSC with a layer of SWCNT/Ag). Most importantly, at a fixed FTO-glass substrate of 8 Omega/sq, this study shows that the short-circuit photocurrent of the DSSC with a layer Ag sandwiched between a layer of SWCNT and the FTO-glass substrate of the counter electrode (2565 mu A) substantially exceeds that of DSSC with a thin film of platinum on the FTO-glass substrate of the counter electrode (1263.7 mu A). (C) 2009 Published by Elsevier B.V. on behalf of The Society of Powder Technology Japan. All rights reserved.
作者
我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。
推荐
暂无数据