相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。In Situ Study of γ-TiAl Lamellae Formation in Supersaturated α2-Ti3Al Grains
Limei Cha et al.
ADVANCED ENGINEERING MATERIALS (2012)
In Situ Synchrotron Study of B19 Phase Formation in an Intermetallic γ-TiAl Alloy
Thomas Schmoelzer et al.
ADVANCED ENGINEERING MATERIALS (2012)
Microstructure development and hardness of a powder metallurgical multi phase γ-TiAl based alloy
Martin Schloffer et al.
INTERMETALLICS (2012)
Influence of Heat Treatments on the Microstructure of a Multi-Phase Titanium Aluminide Alloy
E. Schwaighofer et al.
PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY (2012)
The Contribution of High-Energy X-Rays and Neutrons to Characterization and Development of Intermetallic Titanium Aluminides
T. Schmoelzer et al.
ADVANCED ENGINEERING MATERIALS (2011)
High temperature deformation behaviors of Ti-45Al-2Nb-1.5V-1Mo-Y alloy
H. Z. Niu et al.
INTERMETALLICS (2011)
Thermomechanical characterization of β-stabilized Ti-45Al-7Nb-0.4W-0.15B alloy
B. Liu et al.
INTERMETALLICS (2011)
Recycling of gamma titanium aluminide scrap from investment casting operations
J. Reitz et al.
INTERMETALLICS (2011)
Thermodynamic description of niobium-rich γ-TiAl alloys
Yuhong Liu et al.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH (2011)
Microstructure evolution and mechanical properties of an intermetallic Ti-43.5Al-4Nb-1Mo-0.1B alloy after ageing below the eutectoid temperature
Limei Cha et al.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH (2011)
Phase transition and ordering behavior of ternary Ti-Al-Mo alloys using in-situ neutron diffraction
Saurabh Kabra et al.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH (2011)
Intermetallic γ-Titanium Aluminide Based Alloys from a Metallographic Point of View - a Continuation
Helmut Clemens et al.
PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY (2011)
The Characterisation of a Powder Metallurgically Manufactured TNM (TM) Titanium Aluminide Alloy Using Complimentary Quantitative Methods
M. Schloffer et al.
PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY (2011)
Light-weight Intermetallic Titanium Aluminides - Status of Research and Development
Helmut Clemens et al.
EURO SUPERALLOYS 2010 (2011)
Structural modifications during heating of bulk nanocrystalline FeAl produced by high-pressure torsion
C. Mangler et al.
ACTA MATERIALIA (2010)
Grain refinement of TiAl-based alloys: The role of TiB2 crystallography and growth
D. Gosslar et al.
ACTA MATERIALIA (2010)
Phase fractions, transition and ordering temperatures in TiAl-Nb-Mo alloys: An in- and ex-situ study
Thomas Schmoelzer et al.
INTERMETALLICS (2010)
Study of nanometer-scaled lamellar microstructure in a Ti-45Al-7.5Nb alloy - Experiments and modeling
F. D. Fischer et al.
INTERMETALLICS (2010)
High carbon solubility in a γ-TiAl-based Ti-45Al-5Nb-0.5C alloy and its effect on hardening
C. Scheu et al.
ACTA MATERIALIA (2009)
In Situ Characterization of a Nb and Mo Containing γ-TiAl Based Alloy Using Neutron Diffraction and High-Temperature Microscopy
Ian J. Watson et al.
ADVANCED ENGINEERING MATERIALS (2009)
Crystallography and phase transformation mechanisms in TiAl-based alloys - A synthesis
S. R. Dey et al.
INTERMETALLICS (2009)
Technology and mechanical properties of advanced γ-TiAl based alloys
Wilfried Wallgram et al.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH (2009)
The Al-B-Nb-Ti system. IV. Experimental study and thermodynamic re-evaluation of the binary Al-Nb and ternary Al-Nb-Ti systems
V. T. Witusiewicz et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
In situ study of dynamic recrystallization and hot deformation behavior of a multiphase titanium aluminide alloy
Klaus-Dieter Liss et al.
JOURNAL OF APPLIED PHYSICS (2009)
On the Formation of Ordered ω-phase in High Nb Containing γ-TiAl Based Alloy
Andreas Stark et al.
ADVANCED ENGINEERING MATERIALS (2008)
Design of novel β-solidifying TiAl alloys with adjustable β/B2-phase fraction and excellent hot-workability
Helmut Clemens et al.
ADVANCED ENGINEERING MATERIALS (2008)
In and ex situ investigations of the β-phase in a Nb and Mo containing γ-TiAl based alloy
H. Clemens et al.
INTERMETALLICS (2008)
Grain refinement by low boron additions in niobium-rich TiAl-based alloys
U. Hecht et al.
INTERMETALLICS (2008)
Microstructure and mechanical properties of Ti45Al5Nb+(0-0.5C) sheets
R. Gerling et al.
INTERMETALLICS (2008)
Nanometer-scaled lamellar microstructures in Ti-45Al-7.5Nb-(0;0.5)C alloys and their influence on hardness
Limei Cha et al.
INTERMETALLICS (2008)
The Al-B-Nb-Ti system III. Thermodynamic re-evaluation of the constituent binary system Al-Ti
V. T. Witusiewicz et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2008)
Microstructure and mechanical properties of as-cast Ti-45Al-8.5Nb-(W,B,Y) alloy with industrial scale
Y. H. Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Experimental studies and thermodynamic simulation of phase transformations in high Nb containing γ-TiAl based alloys
Harald F. Chladil et al.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH (2007)
The production of lamellar microstructures in intermetallic TiAl alloys and their characterisation
Ronald Schnitzer et al.
PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY (2007)
Precipitation twinning
F. Appel et al.
ACTA MATERIALIA (2007)
Thermomechanical fatigue behaviours of a third generation γ-TiAl based alloy
W. F. Cui et al.
INTERMETALLICS (2007)
Alloy design concepts for refined gamma titanium aluminide based alloys
R. M. Imayev et al.
INTERMETALLICS (2007)
Grain refinement in γ-TiAl-based alloys by solid state phase transformations
H. Clemens et al.
INTERMETALLICS (2006)
Numerical modelling of kinking in lamellar γ-TiAl based alloys
Thomas Schaden et al.
ADVANCED ENGINEERING MATERIALS (2006)
The limits of refinement by severe plastic deformation
Reinhard Pippan et al.
ADVANCED ENGINEERING MATERIALS (2006)
Mechanical size-effects in miniaturized and bulk materials
Gerhard Dehm et al.
ADVANCED ENGINEERING MATERIALS (2006)
Dissociation of super-dislocations and the stacking fault energy in TiAl based alloys with Nb-doping
Y. Yuan et al.
PHYSICS LETTERS A (2006)
Recrystallization and phase transitions in a γ-TiAl-based alloy as observed by ex situ and in situ high-energy X-ray diffraction
Klaus-Dieter Liss et al.
ACTA MATERIALIA (2006)
Nano-scale design of TiAl alloys based on β-phase decomposition
F Appel et al.
ADVANCED ENGINEERING MATERIALS (2006)
Effect of forging on microstructure and tensile properties of Ti-45Al-(8-9)Nb-(WB,Y) alloy
XJ Xu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2006)
Texture evolution of the γ- and the α/α2-phase during hot rolling of γ-TiAl based alloys
W. Schillinger et al.
INTERMETALLICS (2006)
Microstructural development during directional solidification of α-seeded TiAl alloys
DR Johnson et al.
ACTA MATERIALIA (2006)
Review of alloy and process development of TiAl alloys
Xinhua Wu
INTERMETALLICS (2006)
Economic net-shape forming of TiAl alloys for automotive parts
Si-Young Sung et al.
INTERMETALLICS (2006)
Intermetallics: Why is it so difficult to introduce them in gas turbine engines?
Alain Lasalmonie
INTERMETALLICS (2006)
Phase transformations in high niobium and carbon containing gamma-TiAl based alloys
H. F. Chladil et al.
INTERMETALLICS (2006)
Physical metallurgy for wrought gamma titanium aluminides microstructure control through phase transformations
M Takeyama et al.
INTERMETALLICS (2005)
Fabrication of TiAl components by means of hot forging and machining
T Tetsui et al.
INTERMETALLICS (2005)
Advances in optimisation of mechanical properties in cast TiAl alloys
D Hu et al.
INTERMETALLICS (2005)
Development of Widmanstatten laths in a near-γ TiAl alloy
SR Dey et al.
ACTA MATERIALIA (2005)
Simulation of hot deformation of TiAl based alloy containing high Nb
SS Li et al.
INTERMETALLICS (2005)
Influence of yttrium on microstructure, mechanical properties and deformability of Ti-43Al-9V alloy
YY Chen et al.
INTERMETALLICS (2005)
TEM characterisation of Widmanstatten microstructures in TiAl-based alloys
D Hu et al.
INTERMETALLICS (2005)
Power metallurgical processing of intermetallic gamma titanium aluminides
R Gerling et al.
ADVANCED ENGINEERING MATERIALS (2004)
Microstructure refinement of cast TiAl alloys by β solidification
YG Jin et al.
SCRIPTA MATERIALIA (2004)
Physical metallurgy of high Nb-containing TiAl alloys
F Appel et al.
ZEITSCHRIFT FUR METALLKUNDE (2004)
Neutron diffraction study of texture development during hot working of different gamma-titanium aluminide alloys
HG Brokmeier et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2004)
Creep behavior of TiAl alloys with enhanced high-temperature capability
F Appel et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2003)
Strengthening a high-strength TiAl alloy by hot-forging
T Tetsui et al.
INTERMETALLICS (2003)
A thermodynamical model for the nucleation of mechanical twins in TiAl
FD Fischer et al.
ACTA MATERIALIA (2003)
Thermal exposure induced α2+γ→B2(ω) and α2→B2(ω) phase transformations in a high Nb fully lamellar TiAl alloy
ZW Huang et al.
SCRIPTA MATERIALIA (2003)
An energy approach to the formation of twins in TiAl
H Petryk et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2003)
Deformation mechanisms in TiAl intermetallics - experiments and modeling
WT Marketz et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2003)
A newly developed hot worked TiAl alloy for blades and structural components
T Tetsui et al.
SCRIPTA MATERIALIA (2002)
Weak-beam TEM study on planar fault energies of Al-lean TiAl-base alloys
WJ Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2002)
Transmission electron microscopy on the phase equilibria among β, α and α2 phases in Ti-Al binary system
A Suzuki et al.
INTERMETALLICS (2002)
On the role of twinning during room temperature deformation of γ-TiAl based alloys
WT Marketz et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2002)
Effects of high niobium addition on the mechanical properties and high-temperature deformability of gamma TiAl alloy
T Tetsui
INTERMETALLICS (2002)
Relationships between interstitial content, microstructure and mechanical properties in fully lamellar Ti-48Al alloys, with special reference to carbon
F Perdrix et al.
INTERMETALLICS (2001)
Alloying mechanism of beta stabilizers in a TiAl alloy
FS Sun et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2001)
Tracer solute diffusion of Nb, Zr, Cr, Fe, and Ni in γ-TiAl:: effect of preferential site occupation
C Herzig et al.
INTERMETALLICS (2001)
Effects of brazing filler on properties of brazed joints between TiAl and metallic materials
T Tetsui
INTERMETALLICS (2001)
Fatigue threshold and crack propagation in gamma-TiAl sheets
R Pippan et al.
INTERMETALLICS (2001)
Novel design concepts for gamma-base titanium aluminide alloys
F Appel et al.
INTERMETALLICS (2000)
Phase equilibria among α (hcp), β (bcc) and γ (Ll0) phases in Ti-Al base ternary alloys
R Kainuma et al.
INTERMETALLICS (2000)
On the origin of acoustic emission during room temperature compressive deformation of a γ-TiAl based alloy
F Kauffmann et al.
INTERMETALLICS (2000)
Recovery, recrystallization and phase transformations during thermomechanical processing and treatment of TiAl-based alloys
WJ Zhang et al.
ACTA MATERIALIA (2000)
Effect of heat-treatments and hot-isostatic pressing on phase transformation and microstructure in a β/B2 containing γ-TiAl based alloy
D Zhang et al.
SCRIPTA MATERIALIA (2000)
The relationships of microstructure and properties of a fully lamellar TiAl alloy
GX Cao et al.
INTERMETALLICS (2000)
A first principles study of the influence of alloying elements on TiAl: site preference
Y Song et al.
INTERMETALLICS (2000)
Microstructure observations in rare earth element Gd-modified Ti-44 at% Al
W Li et al.
INTERMETALLICS (2000)
High-temperature structural intermetallics
M Yamaguchi et al.
ACTA MATERIALIA (2000)
Gamma titanium aluminides as prospective structural materials
EA Loria
INTERMETALLICS (2000)