Preparation and Characterization of Magnetic Porous Carbon Microspheres for Removal of Methylene Blue by a Heterogeneous Fenton Reaction

High-specific-surface-area magnetic porous carbon microspheres (MPCMSs) were fabricated by annealing Fe2+-treated porous polystyrene (PS) microspheres, which were prepared using a two-step seed emulsion polymerization process. The resulting porous microspheres were then sulfonated, and Fe2+ was loaded by ion exchange, followed by annealing at 250 degrees C for 1 h under an ambient atmosphere to obtain the PS-250 composite. The MPCMS-500 and MPCMS-800 composites were obtained by annealing PS-250 at 500 and 800 degrees C for 1 h, respectively. The iron oxide in MPCMS-500 mainly existed in the form of Fe3O4, which was concluded by characterization. The MPCMS-500 carbon microspheres were used as catalysts in heterogeneous Fenton reactions to remove methylene blue (MB) from wastewater with the help of H2O2 and NH2OH. The results indicated that this catalytic system has a good performance in terms of removal of MB; it could remove 40 mg L-1 of MB within 40 min. After the reaction, the catalyst was conveniently separated from the media within several seconds using an external magnetic field, and the catalytic activity was still viable even after 10 removal cycles. The good catalytic performance of the composites could be attributed to synergy between the functions of the porous carbon support and the Fe3O4 nanoparticles embedded in the carrier. This work indicates that porous carbon spheres provide good support for the development of a highly efficient heterogeneous Fenton catalyst useful for environmental pollution cleanup.