相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Ecological Recycling of Lithium-Ion Batteries from Electric Vehicles with Focus on Mechanical Processes
Jan Diekmann et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)
Characterization of the calendering process for compaction of electrodes for lithium-ion batteries
Chris Meyer et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Recent advancement of SiOx, based anodes for lithium-ion batteries
Tao Chen et al.
JOURNAL OF POWER SOURCES (2017)
Fast formation cycling for lithium ion batteries
Seong Jin An et al.
JOURNAL OF POWER SOURCES (2017)
Solvent-free dry powder coating process for low-cost manufacturing of LiNi1/3Mn1/3Co1/3O2 cathodes in lithium-ion batteries
Mohanad Al-Shroofy et al.
JOURNAL OF POWER SOURCES (2017)
Enabling aqueous processing for crack-free thick electrodes
Zhijia Du et al.
JOURNAL OF POWER SOURCES (2017)
Impact of drying conditions and wet film properties on adhesion and film solidification of lithium-ion battery anodes
Stefan Jaiser et al.
DRYING TECHNOLOGY (2017)
Increasing productivity in assembling z-folded electrode-separator composites for lithium-ion batteries
Muhammed Aydemir et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2017)
Development of a three-stage drying profile based on characteristic drying stages for lithium-ion battery anodes
Stefan Jaiser et al.
DRYING TECHNOLOGY (2017)
Geometric and Electrochemical Characteristics of LiNi1/3Mn1/3Co1/3O2 Electrode with Different Calendering Conditions
Huixiao Kang et al.
ELECTROCHIMICA ACTA (2017)
Optimizing Areal Capacities through Understanding the Limitations of Lithium-Ion Electrodes
Kevin G. Gallagher et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)
A review on the susceptor assisted microwave processing of materials
Madhuchhanda Bhattacharya et al.
ENERGY (2016)
Integration issues of lithium-ion battery into electric vehicles battery pack
Lip Huat Saw et al.
JOURNAL OF CLEANER PRODUCTION (2016)
Enhancement on the wettability of lithium battery separator toward nonaqueous electrolytes
Yong Xie et al.
JOURNAL OF MEMBRANE SCIENCE (2016)
Energy impact of cathode drying and solvent recovery during lithium-ion battery manufacturing
Shabbir Ahmed et al.
JOURNAL OF POWER SOURCES (2016)
In situ visualization of the electrolyte solvent filling process by neutron radiography
Thomas Knoche et al.
JOURNAL OF POWER SOURCES (2016)
Investigation of film solidification and binder migration during drying of Li-Ion battery anodes
Stefan Jaiser et al.
JOURNAL OF POWER SOURCES (2016)
Study of a dry room in a battery manufacturing plant using a process model
Shabbir Ahmed et al.
JOURNAL OF POWER SOURCES (2016)
The interaction of consecutive process steps in the manufacturing of lithium-ion battery electrodes with regard to structural and electrochemical properties
Henrike Bockholt et al.
JOURNAL OF POWER SOURCES (2016)
Intensive powder mixing for dry dispersing of carbon black and its relevance for lithium-ion battery cathodes
Henrike Bockholt et al.
POWDER TECHNOLOGY (2016)
Review of mechanical design and strategic placement technique of a robust battery pack for electric vehicles
Shashank Arora et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)
Solvent-Free Manufacturing of Electrodes for Lithium-ion Batteries
Brandon Ludwig et al.
SCIENTIFIC REPORTS (2016)
Analyzing Bending Stresses on Lithium-Ion Battery Cathodes induced by the Assembly Process
Antje Schilling et al.
Energy Technology (2016)
Structural and Electrochemical Properties of Calendered Lithium Manganese Oxide Cathodes
Christiane Schilcher et al.
ENERGY TECHNOLOGY (2016)
Promise and reality of post-lithium-ion batteries with high energy densities
Jang Wook Choi et al.
NATURE REVIEWS MATERIALS (2016)
Evaluation of Si-Based Cells and the Importance of Scale-up
M. Karulkar et al.
JOINT GENERAL SESSION: BATTERIES AND ENERGY STORAGE -AND- FUEL CELLS, ELECTROLYTES, AND ENERGY CONVERSION (2016)
Improvement of lithium-ion battery performance using a two-layered cathode by simultaneous slot-die coating
Li-Chun Chen et al.
JOURNAL OF ENERGY STORAGE (2016)
Measuring the coating adhesion strength of electrodes for lithium-ion batteries
W. Haselrieder et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2015)
Discontinuous and Continuous Processing of Low-Solvent Battery Slurries for Lithium Nickel Cobalt Manganese Oxide Electrodes
Henning Dreger et al.
JOURNAL OF ELECTRONIC MATERIALS (2015)
Cost savings for manufacturing lithium batteries in a flexible plant
Paul A. Nelson et al.
JOURNAL OF POWER SOURCES (2015)
Influence of dry mixing and distribution of conductive additives in cathodes for lithium ion batteries
Werner Bauer et al.
JOURNAL OF POWER SOURCES (2015)
Component-cost and performance based comparison of flow and static batteries
Brandon J. Hopkins et al.
JOURNAL OF POWER SOURCES (2015)
Prospects for reducing the processing cost of lithium ion batteries
David L. Wood et al.
JOURNAL OF POWER SOURCES (2015)
Challenges in Lithium-Ion-Battery Slurry Preparation and Potential of Modifying Electrode Structures by Different Mixing Processes
Valentin Wenzel et al.
ENERGY TECHNOLOGY (2015)
Cost modeling of lithium-ion battery cells for automotive applications
Gaetan Patry et al.
ENERGY SCIENCE & ENGINEERING (2015)
Integrated cut and place module for high productive manufacturing of lithium-ion cells
M. Baumeister et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2014)
Slot die coating of lithium-ion battery electrodes: investigations on edge effect issues for stripe and pattern coatings
Marcel Schmitt et al.
JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH (2014)
A Raman spectroscopic method to find binder distribution in electrodes during drying
Hideki Hagiwara et al.
JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH (2014)
Effect of polymeric binder type on the thermal stability and tolerance to roll-pressing of spherical natural graphite anodes for Li-ion batteries
Yoon-Soo Park et al.
JOURNAL OF POWER SOURCES (2014)
A novel slurry concept for the fabrication of lithium-ion battery electrodes with beneficial properties
Boris Bitsch et al.
JOURNAL OF POWER SOURCES (2014)
From coin cells to 400 mAh pouch cells: Enhancing performance of high-capacity lithium-ion cells via modifications in electrode constitution and fabrication
Stephen E. Trask et al.
JOURNAL OF POWER SOURCES (2014)
Microstructure Evolution in Lithium-Ion Battery Electrode Processing
Zhixiao Liu et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2014)
Low-pressure ethane/nitrogen gas mixture plasma surface modification effect on the wetting and electrochemical performance of polymeric separator for lithium-ion batteries
Ruey-Shin Juang et al.
JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2014)
Mesoscale Elucidation of the Influence of Mixing Sequence in Electrode Processing
Zhixiao Liu et al.
LANGMUIR (2014)
Influence of formulation method and related processes on structural, electrical and electrochemical properties of LMS/NCA-blend electrodes
W. Haselrieder et al.
PROGRESS IN SOLID STATE CHEMISTRY (2014)
A new approach for rapid electrolyte wetting in tape cast electrodes for lithium-ion batteries
Wilhelm Pfleging et al.
JOURNAL OF MATERIALS CHEMISTRY A (2014)
Evaluation of slurry characteristics for rechargeable lithium-ion batteries
Ki Yeon Cho et al.
MATERIALS RESEARCH BULLETIN (2013)
Lithium ion battery production
Antti Vayrynen et al.
JOURNAL OF CHEMICAL THERMODYNAMICS (2012)
Influence of electrode preparation on the electrochemical performance of LiNi0.8Co0.15Al0.05O2 composite electrodes for lithium-ion batteries
Hai Yen Tran et al.
JOURNAL OF POWER SOURCES (2012)
Calendering effects on the physical and electrochemical properties of Li[Ni1/3Mn1/3Co1/3]O2 cathode
Honghe Zheng et al.
JOURNAL OF POWER SOURCES (2012)
Porous cathode optimization for lithium cells: Ionic and electronic conductivity, capacity, and selection of materials
Y. -H. Chen et al.
JOURNAL OF POWER SOURCES (2010)
Electrode engineering of nanoparticles for lithium-ion batteries-Role of dispersion technique
T. J. Patey et al.
JOURNAL OF POWER SOURCES (2009)
Two-Dimensional Modeling of Lithium Deposition during Cell Charging
Maureen Tang et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2009)
Electrochemical binding and wiring in battery materials
S. Pejovnik et al.
JOURNAL OF POWER SOURCES (2008)
A review on the separators of liquid electrolyte Li-ion batteries
Sheng Shui Zhang
JOURNAL OF POWER SOURCES (2007)