期刊
MATERIALS & DESIGN
卷 147, 期 -, 页码 157-166出版社
ELSEVIER SCI LTD
DOI: 10.1016/j.matdes.2018.03.035
关键词
Additive manufacturing; Selective electron beam melting; Stainless steel 316L; Process parameters; Microstructure; Mechanical properties
资金
- National Research Foundation (NRF), Singapore
This work presents an experimental study of process optimization of the pair of critical parameters (speed function (SF) and focus offset (FO)) for stainless steel 316 L (SS316L) parts additively manufactured by selective electron beam melting (SEBM). Here, there are two sets of optimized SF-FO parameters that could build SS316L parts with high relative densities (>99%) and well-melted top build surfaces. Tensile test results show that most of the SEBM-built SS316L samples exhibit higher tensile strengths than the conventional cast and wrought counterparts, whereas their ductility is lower. In addition, strong anisotropic tensile properties are observed for the SEBM-built SS316L samples, e.g. they generally have better tensile properties when loaded parallel to the build direction as compared to the horizontal direction. However, a large number of sigma phase was found to precipitate at grain boundaries in the SS316L samples fabricated under lower SF and larger FO with a higher build temperature, which evidently deteriorates their tensile properties particularly for the horizontal direction. It is suggested that SEBM process parameters for SS316L must be optimized to avoid s phase precipitation at elevated temperatures apart from a well-melted top build surface and a high relative density. (C) 2018 Elsevier Ltd. All rights reserved.
作者
我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。
推荐
暂无数据