相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Effect of La0.6Sr0.4Co0.2Fe0.8O3-δ air electrode electrolyte interface on the short-term stability under high-current electrolysis in solid oxide electrolyzer cells
Zehua Pan et al.
JOURNAL OF POWER SOURCES (2018)
Performance degradation and analysis of 10-cell anode-supported SOFC stack with external manifold structure
Dong Yan et al.
ENERGY (2017)
SOFC Stacks Operating under Direct Internal Steam Reforming of Methane
Q. Fu et al.
FUEL CELLS (2017)
Gadolinium doped ceria interlayers for Solid Oxide Fuel Cells cathodes: Enhanced reactivity With sintering aids (Li, Cu, Zn), and improved densification by infiltration
Clement Nicollet et al.
JOURNAL OF POWER SOURCES (2017)
Fabrication of dense and defect-free diffusion barrier layer via constrained sintering for solid oxide fuel cells
Sung-Il Lee et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2017)
Highly controlled thermal behavior of a conjugated gadolinia-doped ceria nanoparticles synthesized by particle-dispersed glycine-nitrate process
Seunghwan Lee et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2017)
CGO as a barrier layer between LSCF electrodes and YSZ electrolyte fabricated by spray pyrolysis for solid oxide fuel cells
D. Szymczewska et al.
SOLID STATE IONICS (2017)
Analysis of Long-Term and Thermal Cycling Tests for a Commercial Solid Oxide Fuel Cell
Dustin Lee et al.
JOURNAL OF ELECTROCHEMICAL ENERGY CONVERSION AND STORAGE (2017)
High-Temperature Current Collection Enabled by the in Situ Phase Transformation of Cobalt-Nickel Foam for Solid Oxide Fuel Cells
Insung Lee et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Record-low sintering-temperature (600 °C) of solid-oxide fuel cell electrolyte
Hari Prasad Dasari et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Anode-Supported Solid Oxide Fuel Cell Achieves 70000 Hours of Continuous Operation
Ludger Blum et al.
ENERGY TECHNOLOGY (2016)
Stability of La0.6Sr0.4Co0.2Fe0.8O3/Ce0.9Gd0.1O2 cathodes during sintering and solid oxide fuel cell operation
Ragnar Kiebach et al.
JOURNAL OF POWER SOURCES (2015)
Analyses of microstructural and elastic properties of porous SOFC cathodes based on focused ion beam tomography
Zhangwei Chen et al.
JOURNAL OF POWER SOURCES (2015)
Performance and Degradation of Solid Oxide Electrolysis Cells in Stack
Q. Fang et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2015)
Studies on structural, morphological and electrical properties of Ce0.8Ln0.2O2-δ (Ln = Y3+, Gd3+, Sm3+, Nd3+ and La3+) solid solutions prepared by citrate complexation method
K. C. Anjaneya et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Long-term evaluation of solid oxide fuel cell candidate materials in a 3-cell generic short stack fixture, Part II: Sealing glass stability, microstructure and interfacial reactions
Yeong-Shyung Chou et al.
JOURNAL OF POWER SOURCES (2014)
High performance air electrode for solid oxide regenerative fuel cells fabricated by infiltration of nano-catalysts
Sung-il Lee et al.
JOURNAL OF POWER SOURCES (2014)
Sr and Zr diffusion in LSCF/10GDC/8YSZ triplets for solid oxide fuel cells (SOFCs)
Fangfang Wang et al.
JOURNAL OF POWER SOURCES (2014)
Long-term evaluation of solid oxide fuel cell candidate materials in a 3-cell generic short stack fixture, part I: Test fixture, sealing, and electrochemical performance
Yeong-Shyung Chou et al.
JOURNAL OF POWER SOURCES (2014)
Thermodynamic and electrical properties of Ba0.5Sr0.5Co0.8Fe0.2O3-δ and La0.6Sr0.4Co0.2Fe0.8O3-δ for intermediate-temperature solid oxide fuel cells
Areum Jun et al.
ELECTROCHIMICA ACTA (2013)
Long-Term Testing of SOFC Stacks at Forschungszentrum Julich
L. Blum et al.
FUEL CELLS (2013)
Fabrication and characterization of all-ceramic solid oxide fuel cells based on composite oxide anode
Jeonghee Kim et al.
JOURNAL OF POWER SOURCES (2013)
Degradation phenomena in a solid oxide electrolysis cell after 9000 h of operation
F. Tietz et al.
JOURNAL OF POWER SOURCES (2013)
Electrochemical characterization of Ni-yttria stabilized zirconia electrode for hydrogen production in solid oxide electrolysis cells
Hari Prasad Dasari et al.
JOURNAL OF POWER SOURCES (2013)
Phase diagram of CeO2-CoO for nano-sized powders
T. Ivas et al.
CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY (2012)
Role of solid oxide fuel cells in a balanced energy strategy
Eric D. Wachsman et al.
ENERGY & ENVIRONMENTAL SCIENCE (2012)
Thin film yttria-stabilized zirconia electrolyte for intermediate-temperature solid oxide fuel cells (IT-SOFCs) by chemical solution deposition
Eun-Ok Oh et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2012)
Fabrication and performance evaluation of planar solid oxide fuel cell with large active reaction area
Jie Wang et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2011)
A high performance ceria based interdiffusion barrier layer prepared by spin-coating
Pawel Plonczak et al.
JOURNAL OF POWER SOURCES (2011)
Three-dimensional numerical analysis of mixed ionic and electronic conducting cathode reconstructed by focused ion beam scanning electron microscope
Katsuhisa Matsuzaki et al.
JOURNAL OF POWER SOURCES (2011)
Reconstruction of porous electrodes by FIB/SEM for detailed microstructure modeling
Jochen Joos et al.
JOURNAL OF POWER SOURCES (2011)
Lowering the Temperature of Solid Oxide Fuel Cells
Eric D. Wachsman et al.
SCIENCE (2011)
Enhanced performance of an anode-supported YSZ thin electrolyte fuel cell with a laser-deposited Sm0.2Ce0.8O1.9 interlayer
Zigui Lu et al.
ELECTROCHEMISTRY COMMUNICATIONS (2010)
Effects of transition metal oxides on the densification of thin-film GDC electrolyte and on the performance of intermediate-temperature SOFC
C. J. Fu et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2010)
Quantification of SOFC anode microstructure based on dual beam FIB-SEM technique
Hiroshi Iwai et al.
JOURNAL OF POWER SOURCES (2010)
3D reconstruction of SOFC anodes using a focused ion beam lift-out technique
P. R. Shearing et al.
CHEMICAL ENGINEERING SCIENCE (2009)
Stabilities of La0.6Sr0.4Co0.2Fe0.8O3-δ oxygen separation membranes-Effects of kinetic demixing/decomposition and impurity segregation
Bo Wang et al.
JOURNAL OF MEMBRANE SCIENCE (2009)
Cofiring of Thin Zirconia Films During SOFC Manufacturing
Robert Muecke et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2009)
Element interdiffusion at electrolyte-cathode interfaces in ceramic high-temperature fuel cells
S. Uhlenbruck et al.
SOLID STATE IONICS (2009)
Thermodynamic and kinetic considerations on degradations in solid oxide fuel cell cathodes
Harumi Yokokawa et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2008)
Ce0.8Gd0.2O2-δ protecting layers manufactured by physical vapor deposition for IT-SOFC
N. Jordan et al.
SOLID STATE IONICS (2008)
Anisotropic microstructural development during the constrained sintering of dip-coated alumina thin films
Olivier Guillon et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2007)
Thin film coating technologies of (Ce,Gd)O2-δ interlayers for application in ceramic high-temperature fuel cells
S. Uhlenbruck et al.
THIN SOLID FILMS (2007)
Three-dimensional reconstruction of porous LSCF cathodes
D. Gostovic et al.
ELECTROCHEMICAL AND SOLID STATE LETTERS (2007)
Kinetic demixing and decomposition of oxygen permeable membranes
Hilde Lea Lein et al.
SOLID STATE IONICS (2006)
Time-dependent performance of mixed-conducting SOFC cathodes
A. Mai et al.
SOLID STATE IONICS (2006)
Ferrite-based perovskites as cathode materials for anode-supported solid oxide fuel cells -: Part II.: Influence of the CGO interlayer
Andreas Mai et al.
SOLID STATE IONICS (2006)
Ba0.5Sr0.5Co0.8Fe0.2O3-δ as a cathode for IT SOFCs with a GDC interlayer
Zaoshu Duan et al.
JOURNAL OF POWER SOURCES (2006)
Three-dimensional reconstruction of a solid-oxide fuel-cell anode
James R. Wilson et al.
NATURE MATERIALS (2006)
Sintering analysis of undoped and cobalt oxide doped ceria solid solutions
E Jud et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2005)
Preparation and evaluation of doped ceria interlayer on supported stabilized zirconia electrolyte SOFCs by wet ceramic processes
TL Nguyen et al.
SOLID STATE IONICS (2004)
Study of Ln0.6Sr0.4CO0.8Mn0.2O3-δ (Ln = La, Gd, Sm or Nd) as the cathode materials for intermediate temperature SOFC
WX Chen et al.
MATERIALS RESEARCH BULLETIN (2003)
Characterisation of thin films of ceria-based electrolytes for IntermediateTemperature - Solid oxide fuel cells (IT-SOFC)
E Gourba et al.
IONICS (2003)
Supported Zr(Sc)O2 SOFCs for reduced temperature prepared by electrophoretic deposition
K Kobayashi et al.
SOLID STATE IONICS (2002)
Performance of a La0.6Sr0.4Co0.8Fe0.2O3-Ce0.8Gd0.2O1.9-Ag cathode for ceria electrolyte SOFCs
SR Wang et al.
SOLID STATE IONICS (2002)
Gadolinia-doped ceria and yttria stabilized zirconia interfaces: Regarding their application for SOFC technology
A Tsoga et al.
ACTA MATERIALIA (2000)
Advances in solid oxide fuel cell technology
SC Singhal
SOLID STATE IONICS (2000)