相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Classification of the printability of selected food for 3D printing: Development of an assessment method using hydrocolloids as reference material
Hyun Woo Kim et al.
JOURNAL OF FOOD ENGINEERING (2017)
3D printed ferromagnetic composites for microwave applications
Younes Arbaoui et al.
JOURNAL OF MATERIALS SCIENCE (2017)
Modelling and characterisation for the responsive performance of CF/PLA and CF/PEEK smart materials fabricated by 4D printing
Chuncheng Yang et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2017)
A review on composite materials and process parameters optimisation for the fused deposition modelling process
N. Mohan et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2017)
Electrically conductive filament for 3D-printed circuits and sensors
Sen Wai Kwok et al.
APPLIED MATERIALS TODAY (2017)
3D printing of polymer matrix composites: A review and prospective
Xin Wang et al.
COMPOSITES PART B-ENGINEERING (2017)
Magnetic properties of polymer matrix composites with embedded ferrite particles
Ana Paula Pereira Fulco et al.
NDT & E INTERNATIONAL (2016)
Recent developments in 3D printable composite materials
Umme Kalsoom et al.
RSC ADVANCES (2016)
3D printed anisotropic dielectric composite with meta-material features
D. V. Isakov et al.
MATERIALS & DESIGN (2016)
Microwave dielectric characterisation of 3D-printed BaTiO3/ABS polymer composites
F. Castles et al.
SCIENTIFIC REPORTS (2016)
Experimental investigations on fused deposition modelling of polymer-layered silicate nanocomposite
Vishal Francis et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2016)
A 3D printable diamond polymer composite: a novel material for fabrication of low cost thermally conducting devices
U. Kalsoom et al.
RSC ADVANCES (2016)
Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling
Fuda Ning et al.
COMPOSITES PART B-ENGINEERING (2015)
3D printed microfluidics for biological applications
Chee Meng Benjamin Ho et al.
LAB ON A CHIP (2015)
Recent advances in 3D printing of biomaterials
Helena N. Chia et al.
JOURNAL OF BIOLOGICAL ENGINEERING (2015)
Thermo-mechanical Characterization of Metal/Polymer Composite Filaments and Printing Parameter Study for Fused Deposition Modeling in the 3D Printing Process
Seyeon Hwang et al.
JOURNAL OF ELECTRONIC MATERIALS (2015)
Embedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers
Joseph T. Muth et al.
ADVANCED MATERIALS (2014)
Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
Bethany C. Gross et al.
ANALYTICAL CHEMISTRY (2014)
3D Printing multifunctionality: structures with electronics
David Espalin et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
Optical Properties of 3D Printable Plastics in the THz Regime and their Application for 3D Printed THz Optics
S. F. Busch et al.
JOURNAL OF INFRARED MILLIMETER AND TERAHERTZ WAVES (2014)
Studies on thermoplastic 3D printing of steel-zirconia composites
Uwe Scheithauer et al.
JOURNAL OF MATERIALS RESEARCH (2014)
Options for additive rapid prototyping methods (3D printing) in MEMS technology
Victor A. Lifton et al.
RAPID PROTOTYPING JOURNAL (2014)
3D printed modules for integrated microfluidic devices
Kyoung G. Lee et al.
RSC ADVANCES (2014)
Bone tissue engineering scaffolding: computer-aided scaffolding techniques
Boonlom Thavornyutikarn et al.
PROGRESS IN BIOMATERIALS (2014)
3D Printing of Interdigitated Li-Ion Microbattery Architectures
Ke Sun et al.
ADVANCED MATERIALS (2013)
FDM 3D PRINTING TECHNOLOGY IN MANUFACTURING COMPOSITE ELEMENTS
P. Dudek
ARCHIVES OF METALLURGY AND MATERIALS (2013)
Terahertz plasmonic waveguides created via 3D printing
Shashank Pandey et al.
OPTICS EXPRESS (2013)
3D printing of microscopic bacterial communities
Jodi L. Connell et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2013)
Microstructures and Properties of 17-4 PH Stainless Steel Fabricated by Selective Laser Melting
Lawrence E. Murr et al.
Journal of Materials Research and Technology-JMR&T (2013)
A Simple, Low-Cost Conductive Composite Material for 3D Printing of Electronic Sensors
Simon J. Leigh et al.
PLOS ONE (2012)
Thermo-mechanical properties of a highly filled polymeric composites for Fused Deposition Modeling
M. Nikzad et al.
MATERIALS & DESIGN (2011)
A review on stereolithography and its applications in biomedical engineering
Ferry P. W. Melchels et al.
BIOMATERIALS (2010)
Ceramic scaffolds produced by computer-assisted 3D printing and sintering: characterization and biocompatibility investigations
Patrick H. Warnke et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2010)
Material characterisation and process development for chocolate additive layer manufacturing
L. Hao et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2010)
Sensors based on bulk soft magnetic materials: Advances and challenges
Pavel Ripka
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2008)
Microinjection moulding of 316L/17-4PH and 316L/Fe powders for fabrication of magnetic-nonmagnetic bimetals
Ph. Imgrund et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
Effects of compatibilizer on mechanical, morphological, and rheological properties of polypropylene/poly(acrylonitrile-butadiene-styrene) blends
Chong K. Kum et al.
MACROMOLECULAR RESEARCH (2007)
3D printing technique applied to rapid casting
Elena Bassoli et al.
RAPID PROTOTYPING JOURNAL (2007)
Manufacturing of multi-functional micro parts by two-component metal injection moulding
P. Imgrund et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2007)
An investigation on the sintering behavior of 316L and 17-4PH stainless steel powders for graded composites
A Simchi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Rapid investment casting: direct and indirect approaches via fused deposition modelling
CW Lee et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2004)
Development of new metal/polymer materials for rapid tooling using Fused deposition modelling
SH Masood et al.
MATERIALS & DESIGN (2004)
Mechanical characterization of parts fabricated using fused deposition modeling
A Bellini et al.
RAPID PROTOTYPING JOURNAL (2003)
Fused deposition modeling of novel scaffold architectures for tissue engineering applications
I Zein et al.
BIOMATERIALS (2002)
Short fiber reinforced composites for fused deposition modeling
WH Zhong et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2001)
Scaffolds in tissue engineering bone and cartilage
DW Hutmacher
BIOMATERIALS (2000)
分享论文
