相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Gradient in microstructure and mechanical property of selective laser melted AlSi10Mg
Y. J. Liu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Decision methods application to compare conventional manufacturing process with metal additive manufacturing process in the aerospace industry
Marcio Fernando Cruz et al.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2017)
Mechanical properties of titanium-based Ti-6Al-4V alloys manufactured by powder bed additive manufacture
J. Tong et al.
MATERIALS SCIENCE AND TECHNOLOGY (2017)
Analysis of laser-melt pool-powder bed interaction during the selective laser melting of a stainless steel
Valerie Gunenthiram et al.
JOURNAL OF LASER APPLICATIONS (2017)
Mechanical behavior of selective laser melted 316L stainless steel
Jyoti Suryawanshi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Process defects and in situ monitoring methods in metal powder bed fusion: a review
Marco Grasso et al.
MEASUREMENT SCIENCE AND TECHNOLOGY (2017)
3D printing of high-strength aluminium alloys
John H. Martin et al.
NATURE (2017)
Microstructure and mechanical property of selective laser melted Ti6Al4V dependence on laser energy density
Jie Han et al.
RAPID PROTOTYPING JOURNAL (2017)
Study on the flow properties of Ti-6Al-4V powders prepared by radio-frequency plasma spheroidization
Wen-Hou Wei et al.
ADVANCED POWDER TECHNOLOGY (2017)
Compressive and fatigue behavior of beta-type titanium porous structures fabricated by electron beam melting
Y. J. Liu et al.
ACTA MATERIALIA (2017)
Selective Laser Melting of Titanium Alloys and Titanium Matrix Composites for Biomedical Applications: A Review
Lai-Chang Zhang et al.
ADVANCED ENGINEERING MATERIALS (2016)
Microstructure, defects and mechanical behavior of beta-type titanium porous structures manufactured by electron beam melting and selective laser melting
Y. J. Liu et al.
ACTA MATERIALIA (2016)
Metallurgy of high-silicon steel parts produced using Selective Laser Melting
Michele Garibaldi et al.
ACTA MATERIALIA (2016)
Distinction in corrosion resistance of selective laser melted Ti-6Al-4V alloy on different planes
Nianwei Dai et al.
CORROSION SCIENCE (2016)
Improved mechanical properties of the new Ti-15Ta-xZr alloys fabricated by selective laser melting for biomedical application
Lamei Yan et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Quantification and characterisation of porosity in selectively laser melted Al-Si10-Mg using X-ray computed tomography
I. Maskery et al.
MATERIALS CHARACTERIZATION (2016)
Predictive models for physical and mechanical properties of Ti6Al4V produced by Selective Laser Melting
F. Bartolomeu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Selective laser melting of high strength Al-Cu-Mg alloys: Processing, microstructure and mechanical properties
Hu Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Densification Behavior of 316L Stainless Steel Parts Fabricated by Selective Laser Melting by Variation in Laser Energy Density
Joon-Phil Choi et al.
MATERIALS TRANSACTIONS (2016)
Mechanical Properties of Vermicular Graphite Cast Iron Processed by Selective Laser Surface Alloying with Ultra-fine ZrO2 Ceramic Particulates
Peng-Yu Lin et al.
ACTA METALLURGICA SINICA-ENGLISH LETTERS (2016)
Correlation between porosity and processing parameters in TiAl6V4 produced by selective laser melting
Galina Kasperovich et al.
MATERIALS & DESIGN (2016)
Selective laser melting of stainless steel 316L with low porosity and high build rates
Zhongji Sun et al.
MATERIALS & DESIGN (2016)
SURFACE QUALITY RESEARCH FOR SELECTIVE LASER MELTING OF TI-6AL-4V ALLOY
M. Krol et al.
ARCHIVES OF METALLURGY AND MATERIALS (2016)
XCT analysis of the influence of melt strategies on defect population in Ti-6Al-4V components manufactured by Selective Electron Beam Melting
S. Tammas-Williams et al.
MATERIALS CHARACTERIZATION (2015)
Titanium alloyed with rhenium by selective laser melting
Edward Chlebus et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Effect of the regimes of selective laser melting on the structure and physicomechanical properties of cobalt-base superalloys
T. V. Tarasova et al.
PHYSICS OF METALS AND METALLOGRAPHY (2015)
Processing AlSi10Mg by selective laser melting: parameter optimisation and material characterisation
K. Kempen et al.
MATERIALS SCIENCE AND TECHNOLOGY (2015)
Precipitation and austenite reversion behavior of a maraging steel produced by selective laser melting
Eric A. Jaegle et al.
JOURNAL OF MATERIALS RESEARCH (2014)
Manufacture by selective laser melting and mechanical behavior of commercially pure titanium
H. Attar et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Surface roughness analysis, modelling and prediction in selective laser melting
Giovanni Strano et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2013)
The Instability of an Electrohydrodynamic Viscous Liquid Micro-Cylinder Buried in a Porous Medium: Effect of Thermosolutal Marangoni Convection
Galal M. Moatimid et al.
MATHEMATICAL PROBLEMS IN ENGINEERING (2013)
Microstructures and mechanical behavior of Inconel 718 fabricated by selective laser melting
K. N. Amato et al.
ACTA MATERIALIA (2012)
Effects of processing parameters on microstructure and mechanical property of selective laser melted Ti6Al4V
Bo Song et al.
MATERIALS & DESIGN (2012)
As-Fabricated and Heat-Treated Microstructures of the Ti-6Al-4V Alloy Processed by Selective Laser Melting
T. Vilaro et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2011)
Investigation into the impact of sub-populations of agglomerates on the particle size distribution and flow properties of conventional microcrystalline cellulose grades
John F. Gamble et al.
PHARMACEUTICAL DEVELOPMENT AND TECHNOLOGY (2011)
Manufacture by selective laser melting and mechanical behavior of a biomedical Ti-24Nb-4Zr-8Sn alloy
L. C. Zhang et al.
SCRIPTA MATERIALIA (2011)
A study of the micro structural evolution during selective laser melting of Ti-6Al-4V
Lore Thijs et al.
ACTA MATERIALIA (2010)
Study on formation of surface and microstructure of stainless steel part produced by selective laser melting
L. Jinhui et al.
MATERIALS SCIENCE AND TECHNOLOGY (2010)
Microstructures and mechanical properties of electron beam-rapid manufactured Ti-6Al-4V biomedical prototypes compared to wrought Ti-6Al-4V
L. E. Murr et al.
MATERIALS CHARACTERIZATION (2009)
Relationship between Fracture Toughness and Tensile Properties of A357 Cast Aluminum Alloy
N. D. Alexopoulos et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2009)
Development of porous 316L stainless steel with controllable microcellular features using selective laser melting
Y. F. Shen et al.
MATERIALS SCIENCE AND TECHNOLOGY (2008)
Comparison between the products of four RPM systems for metals
KA Ghany et al.
RAPID PROTOTYPING JOURNAL (2006)
Selective laser melting of iron-based powder
JP Kruth et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)
分享论文
