Preparation, structure, and properties of an AlCrMoNbZr high-entropy alloy coating for accident-tolerant fuel cladding

A nearly equal molar ratio AlCrMoNbZr high-entropy alloy (HEA) coating was deposited on N36 zirconium alloy substrates using magnetron co-sputtering technology to enhance the corrosion resistance of light water reactor (LWR) fuel cladding. The microstructure, mechanical properties, surface wettability and corrosion resistance of the AlCrMoNbZr coating were systematically investigated. The X-ray diffraction (XRD) and transmission electron microscopy (TEM) analyses showed that the AlCrMoNbZr HEA coating contained a composite of amorphous and bcc-structured nanocrystals. A nanoindentation test revealed that the coating had a high hardness of 11.8 GPa, and a scratch test indicated that the coating well adhered to the N36 substrate. The contact angle test showed that the static contact angle was 109, which indicated the good hydrophobic property of the coating. The corrosion measurement showed that the AlCrMoNbZr coating remained effective after it was immersed in static pure water at 360 degrees C and 18.7 MPa for 30 days, and no N36 substrate oxides formed, which indicated a superior corrosion resistance. Furthermore, the corrosion behaviour of the coating was discussed. The weight gain measurement (8.8 mg/dm(2) weight gain) proved that the coating experienced an oxidation process, and during the process, protective Nb2Zr6O17, ZrO2 and Cr2O3 formed on the surface of the coating. Hence, the AlCrMoNbZr HEA coating is a potential candidate material for accident-tolerant fuel (ATF) coatings.