4.6 Article

Single-ended mid-infrared laser-absorption sensor for time-resolved measurements of water concentration and temperature within the annulus of a rotating detonation engine

期刊

PROCEEDINGS OF THE COMBUSTION INSTITUTE
卷 37, 期 2, 页码 1435-1443

出版社

ELSEVIER SCIENCE INC
DOI: 10.1016/j.proci.2018.05.021

关键词

Single-ended; Combustion diagnostics; Mid-infrared; Wavelength-modulation spectroscopy; Detonations

资金

  1. Office of Naval Research [N00014-15-P-1121]
  2. Innovative Scientific Solutions Incorporated (ISSI)
  3. National Defense Science and Engineering Graduate (NDSEG) Fellowship - DoD [32 CFR 168a]
  4. Air Force Office of Scientific Research
  5. Army Research Office

向作者/读者索取更多资源

A novel single-ended mid-infrared laser-absorption sensor for time-resolved measurements of water mole fraction and temperature was developed and deployed within the annulus of a hydrogen/air-fed rotating detonation engine (RDE). The sensor transmitted two laser beams targeting mid-infrared water transitions through a single optical port on the outer wall of the cylindrical RDE annulus and measured the backscattered radiation from the RDE inner surface using a photodetector for a round-trip path of 1.52 cm. Optimizing the sensor's optical arrangement using numerical ray tracing to minimize interference from optical emission, beam steering, and scattered laser light from window surfaces was essential to sensor performance. Scanned-wavelength-modulation spectroscopy with second-harmonic detection and first-harmonic normalization was implemented to allow for frequency-domain multiplexing of the two lasers and to suppress non-absorbing interference sources such as beam-steering and emission. Tunable diode lasers near 2551 and 2482 nm were modulated at 100 and 122 kHz, respectively, and sinusoidally scanned across the peaks of their respective water transitions at 10 kHz to provide a measurement rate of 20 kHz and detection limit of 0.5% water by mole. Experimentally derived spectroscopic parameters enabled water and temperature sensing with respective uncertainties of 7.3% and 5.3% relative to the measured values. Time-resolved and time-averaged sensor measurements of gas temperature and water vapor mole fraction allow quantitative evaluation of the combustion progress at the measurement location and thus provide a design tool for RDE optimization. Broadly, this single-ended laser sensor should find applications in other combustion systems where optical access is limited. (C) 2018 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

作者

我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。

评论

主要评分

4.6
评分不足

次要评分

新颖性
-
重要性
-
科学严谨性
-
评价这篇论文

推荐

暂无数据
暂无数据