Deformation mechanisms of Al0.1CoCrFeNi high entropy alloy at ambient and cryogenic temperatures

The deformation mechanisms of an Al0.1CoCrFeNi high entropy alloy (HEA) produced by the vacuum levitation melting (VLM) method were studied in the compression test at temperatures range from 298 K to 77 K. The nominal yield strength was 120, 168, 275 MPa for the alloy tested at 298, 200, and 77 K, respectively. Note that all the compression tests were done only up to the similar to 50% plastic strains. In addition, the remarkable strain hardening ability and the serration phenomena were observed during the deformation of the alloy at 77 K. Transmission electron microscopy (TEM) and high-resolution TEM (HRTEM) characterizations revealed that at 298 and 200 K, the deformation in the alloy occurs on the normal FCC {111} < 110 > slip systems by planar dislocation glide. In contrast, at 77 K, nano-twinning becomes an additional deformation mechanism. Overall, the significant increase in the nominal yield strength, extensive strain-hardening ability, and the serration phenomena are attributed to the capability of extensive nano-twinnings at 77 K.