相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Optimization of In-Situ Shot-Peening-Assisted Cold Spraying Parameters for Full Corrosion Protection of Mg Alloy by Fully Dense Al-Based Alloy Coating
Ying-Kang Wei et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2017)
A Study on the Effects Bonding Temperature and Holding Time on Mechanical and Metallurgical Properties of Al-Cu Dissimilar Joining by DFW
Ahmad Safarzadeh et al.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2017)
The effect of pure aluminum cold spray coating on corrosion and corrosion fatigue of magnesium (3% Al-1% Zn) extrusion
Mohammad Diab et al.
SURFACE & COATINGS TECHNOLOGY (2017)
Laser micro-welding of Cu-Al dissimilar metals
Wenqing Shi et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Joining of Cast ZE41A Mg to Wrought 6061 Al by the Cold Spray Process and Friction Stir Welding
Victor Kenneth Champagne et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2016)
Electron beam welding of aluminum to copper: mechanical properties and their relation to microstructure
C. Otten et al.
WELDING IN THE WORLD (2016)
Effect of Intermetallic Compound Phases on the Mechanical Properties of the Dissimilar Al/Cu Friction Stir Welded Joints
S. A. Khodir et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2016)
Intermetallic Phase Formation in Explosively Welded Al/Cu Bimetals
H. Amani et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2016)
Microstructure and mechanical performances of ultrasonic spot welded Al/Cu joints with Al 2219 alloy particle interlayer
Zenglei Ni et al.
MATERIALS & DESIGN (2016)
A Review on Dissimilar Friction Stir Welding of Copper to Aluminum: Process, Properties, and Variants
Kush P. Mehta et al.
MATERIALS AND MANUFACTURING PROCESSES (2016)
Formation and evolution of intermetallic compounds at interfaces of Cu/Al joints by ultrasonic-assisted soldering
Zhang Huiwen et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
Tool travel speed effects on the microstructure of friction stir welded aluminum-copper joints
M. Felix Xavier Muthu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
Microstructure and mechanical properties of dissimilar Al-Cu joints by friction stir welding
Qiu-zheng Zhang et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2015)
Microstructure and mechanical property of Ti and Ti6Al4V prepared by an in-situ shot peening assisted cold spraying
Xiao-Tao Luo et al.
MATERIALS & DESIGN (2015)
Analysis of Thermal History and Residual Stress in Cold-Sprayed Coatings
Z. Arabgol et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2014)
High velocity impact induced microstructure evolution during deposition of cold spray coatings: A review
Xiao-Tao Luo et al.
SURFACE & COATINGS TECHNOLOGY (2014)
Modelling of impact behaviour of cold spray particles: review
W. Y. Li et al.
SURFACE ENGINEERING (2014)
Electrical performance of laser braze-welded aluminum-copper interconnects
Tobias Solchenbach et al.
JOURNAL OF MANUFACTURING PROCESSES (2014)
Cold spray deposition of a WC-25Co cermet onto Al7075-T6 and carbon steel substrates
S. Dosta et al.
ACTA MATERIALIA (2013)
Ultrasound-assisted brazing of Cu/Al dissimilar metals using a Zn-3Al filler metal
Yong Xiao et al.
MATERIALS & DESIGN (2013)
Microstructural evolution and mechanical properties of dissimilar Al-Cu joints produced by friction stir welding
C. W. Tan et al.
MATERIALS & DESIGN (2013)
Mechanical characteristics of laser braze-welded aluminium-copper connections
Tobias Solchenbach et al.
OPTICS AND LASER TECHNOLOGY (2013)
Enhancing metallurgical and mechanical properties of friction stir lap welding of Al-Cu using intermediate layer
M. Akbari et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2013)
Microstructure and fatigue behavior of cold spray coated A15052
R. Ghelichi et al.
ACTA MATERIALIA (2012)
Formation and distribution of brittle structures in friction stir welding of aluminium and copper: Influence of shoulder geometry
I. Galvao et al.
INTERMETALLICS (2012)
Reliability studies of Cu/Al joints brazed with Zn-Al-Ce filler metals
Ji Feng et al.
MATERIALS & DESIGN (2012)
Experimental study of through-depth residual stress in explosive welded Al-Cu-Al multilayer
M. Sedighi et al.
MATERIALS & DESIGN (2012)
Multiscale Study of Interfacial Intermetallic Compounds in a Dissimilar Al 6082-T6/Cu Friction-Stir Weld
M. N. Avettand-Fenoel et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2012)
Influence of Tool Offsetting on the Structure and Morphology of Dissimilar Aluminum to Copper Friction-Stir Welds
Ivan Galvao et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2012)
Investigation of weld defects in dissimilar friction stir welding of aluminium to brass by radiography
A. Esmaeili et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2012)
Linear friction welding of aluminium to copper
I. Bhamji et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2012)
Multi-walled carbon nanotube-reinforced copper nanocomposite coating fabricated by low-pressure cold spray process
Seungchan Cho et al.
SURFACE & COATINGS TECHNOLOGY (2012)
Cold spray blended Al+Mg17Al12 coating for corrosion protection of AZ91D magnesium alloy
Hengyong Bu et al.
SURFACE & COATINGS TECHNOLOGY (2012)
The role of rotation speed on intermetallic compounds formation and mechanical behavior of friction stir welded brass/aluminum 1050 couple
A. Esmaeili et al.
INTERMETALLICS (2011)
Influence of Gas Temperature on Microstructure and Properties of Cold Spray 304SS Coating
Xianming Meng et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2011)
Cold Spray Al-5% Mg Coatings for the Corrosion Protection of Magnesium Alloys
Brian S. DeForce et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2011)
An investigation on diffusion bonding of aluminum to copper using equal channel angular extrusion process
P. Eslami et al.
MATERIALS LETTERS (2011)
A metallurgical and mechanical study on dissimilar Friction Stir welding of aluminum 1050 to brass (CuZn30)
A. Esmaeili et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Effect of friction stir welding parameters on the microstructure and mechanical properties of the dissimilar Al-Cu joints
P. Xue et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Enhanced mechanical properties of friction stir welded dissimilar Al-Cu joint by intermetallic compounds
P. Xue et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Friction stir diffusion bonding of dissimilar metals
M. Girard et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2010)
The use of Al-Al2O3 cold spray coatings to improve the surface properties of magnesium alloys
K. Spencer et al.
SURFACE & COATINGS TECHNOLOGY (2009)
Effect of SiC particle size on cold sprayed Al-SiC composite coatings
H. Lee et al.
SURFACE ENGINEERING (2009)
Investigation of interface properties and weldability of aluminum and copper plates by explosive welding method
Behcet Gulenc
MATERIALS & DESIGN (2008)
Failure study on laser welds of dual phase steel in formability testing
M. S. Xia et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2008)
Properties of SiC-reinforced aluminum alloy coatings produced by the cold gas dynamic spraying process
E. Sansoucy et al.
SURFACE & COATINGS TECHNOLOGY (2008)
Microstructure and mechanical properties of Sc modified Al-Cu alloy (AA2219) electron beam welds
P. C. Seshagiri et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2008)
Investigation of Al-Al2O3 cold spray coating formation and properties
Eric Irissou et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2007)
Friction welding of dissimilar pure metals
S. D. Meshram et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2007)
Effect of different incidence angles on bonding performance in cold spraying
Li Gang et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2007)
A theoretical model for prediction of deposition efficiency in cold spraying
CJ Li et al.
THIN SOLID FILMS (2005)
Effects of intermetallic compound on the electrical and mechanical properties of friction welded Cu/Al bimetallic joints during annealing
WB Lee et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2005)
Analysis of the impact velocity of powder particles in the cold-gas dynamic-spray process
M Grujicic et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Image analysis of electrode degradation in resistance spot welding of aluminium
S Peng et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2004)
Bonding mechanism in cold gas spraying
H Assadi et al.
ACTA MATERIALIA (2003)
Deposition characteristics of titanium coating in cold spraying
CJ Li et al.
SURFACE & COATINGS TECHNOLOGY (2003)