相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Microinjection molding of polypropylene/multi-walled carbon nanotube nanocomposites: The influence of process parameters
Shengtai Zhou et al.
POLYMER ENGINEERING AND SCIENCE (2018)
Influence of melt-mixing processing sequence on electrical conductivity of polyethylene/polypropylene blends filled with graphene
Ce Tu et al.
POLYMER BULLETIN (2017)
Flow and Thermal History Effects on Morphology and Tensile Behavior of Poly(oxymethylene) Micro Injection Molded Parts
M. R. Kamal et al.
INTERNATIONAL POLYMER PROCESSING (2017)
Enhanced thermal conductivity of polyamide 6/polypropylene (PA6/PP) immiscible blends with high loadings of graphite
Shengtai Zhou et al.
JOURNAL OF COMPOSITE MATERIALS (2016)
Assessing a stepped sonotrode in ultrasonic molding technology
J. Grabalosa et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
Effective in situ polyamide 6 microfibrils in isotactic polypropylene under microinjection molding: significant improvement of mechanical performance
Liyan Yang et al.
JOURNAL OF MATERIALS SCIENCE (2016)
Coalescence in PLA-PBAT blends under shear flow: Effects of blend preparation and PLA molecular weight
M. Nofar et al.
JOURNAL OF RHEOLOGY (2016)
Effects of nanoclay and its localization on the morphology stabilization of PLA/PBAT blends under shear flow
M. Nofar et al.
POLYMER (2016)
Deep insight into the key role of carbon black self-networking in the formation of co-continuous-like morphology in polylactide/poly(ether)urethane blends
Hao Xiu et al.
POLYMER (2016)
Electrical and morphological properties of microinjection molded polystyrene/multiwalled carbon nanotubes nanocomposites
Shengtai Zhou et al.
POLYMER ENGINEERING AND SCIENCE (2016)
Polylactide/Poly(ω-hydroxytetradecanoic acid) Reactive Blending: A Green Renewable Approach to Improving Polylactide Properties
Stephen Spinella et al.
BIOMACROMOLECULES (2015)
Filling behavior, morphology evolution and crystallization behavior of microinjection molded poly(lactic acid)/hydroxyapatite nanocomposites
Zhuo Liu et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Reactive extrusion effects on rheological and mechanical properties of poly(lactic acid)/poly[(butylene succinate)-co-adipate]/epoxy chain extender blends and clay nanocomposites
Amin Mirzadeh et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2015)
Interfacial and rheological properties of PLA/PBAT and PLA/PBSA blends and their morphological stability under shear flow
M. Nofar et al.
JOURNAL OF RHEOLOGY (2015)
Morphology, miscibility and continuity development in poly(lactic acid)/poly(butylene adipate-co-terephthalate) blends
Ebrahim Jalali Dil et al.
POLYMER (2015)
In situ nano-fibrillation of microinjection molded poly(lactic acid)/poly(ε-caprolactone) blends and comparison with conventional injection molding
Weiwei Ding et al.
RSC ADVANCES (2015)
Effects of gate design and cavity thickness on filling, morphology and mechanical properties of microinjection mouldings
Nan Zhang et al.
MATERIALS & DESIGN (2015)
Electrical conductivity and percolation threshold of hybrid carbon/polymer composites
Atieh Motaghi et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2015)
Synthesis and Properties of a Polymerizable Quaternary Ammonium Salt
Wei Zhou et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2014)
The morphology, crystallization and conductive performance of a polyoxymethylene/carbon nanotube nanocomposite prepared under microinjection molding conditions
Zhi Jiang et al.
JOURNAL OF POLYMER RESEARCH (2014)
Flow Induced Crystallization of Poly(ether-block-amide) from the Microinjection Molding Process and its Effect on Mechanical Properties
Nan Zhang et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2014)
Improving impact toughness of polylactide/poly(ether)urethane blends via designing the phase morphology assisted by hydrophilic silica nanoparticles
Hao Xiu et al.
POLYMER (2014)
Formation of new electric double percolation via carbon black induced co-continuous like morphology
Hao Xiu et al.
RSC ADVANCES (2014)
Elongational rheology of biodegradable poly(lactic acid)/poly[(butylene succinate)-co-adipate] binary blends and poly(lactic acid)/poly[(butylene succinate)-co-adipate]/clay ternary nanocomposites
Hassan Eslami et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2013)
Effect of a chain extender on the rheological and mechanical properties of biodegradable poly(lactic acid)/poly[(butylene succinate)-co-adipate] blends
Hassan Eslami et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2013)
Thermally conductive composites obtained by flake graphite filling immiscible Polyamide 6/Polycarbonate blends
Shengtai Zhou et al.
THERMOCHIMICA ACTA (2013)
Role of Specific Interfacial Area in Controlling Properties of Immiscible Blends of Biodegradable Polylactide and Poly[(butylene succinate)-co-adipate]
Vincent Ojijo et al.
ACS APPLIED MATERIALS & INTERFACES (2012)
Morphology Development in the Gate Region of Microinjection-Molded Thermoplastics
Jing-Song Chu et al.
POLYMER ENGINEERING AND SCIENCE (2012)
Selective Localization of Nanofillers: Effect on Morphology and Crystallization of PLA/PCL Blends
Defeng Wu et al.
MACROMOLECULAR CHEMISTRY AND PHYSICS (2011)
Properties of Microinjection Molding of Polymer Multiwalled Carbon Nanotube Conducting Composites
Samaneh Abbasi et al.
POLYMER ENGINEERING AND SCIENCE (2011)
Thermal conductivity of carbon nanotubes and their polymer nanocomposites: A review
Zhidong Han et al.
PROGRESS IN POLYMER SCIENCE (2011)
Flow induced orientation of multiwalled carbon nanotubes in polycarbonate nanocomposites: Rheology, conductivity and mechanical properties
Samaneh Abbasi et al.
POLYMER (2010)
A review of vapor grown carbon nanofiber/polymer conductive composites
Mohammed H. Al-Saleh et al.
CARBON (2009)
Mechanical and thermal properties of chicken feather fiber/PLA green composites
Sha Cheng et al.
COMPOSITES PART B-ENGINEERING (2009)
Improving mechanical performance of injection molded PLA by controlling crystallinity
Angela M. Harris et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2008)
Microinjection molding of thermoplastic polymers:: a review
Julien Giboz et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2007)
Thermal and thermomechanical properties of poly[(butylene succinate)-co-adipate] nanocomposite
Suprakas Sinha Ray et al.
POLYMER DEGRADATION AND STABILITY (2007)
Crystal modifications and thermal behavior of poly(L-lactic acid) revealed by infrared spectroscopy
JM Zhang et al.
MACROMOLECULES (2005)
Mechanical properties and electrical conductivity of carbon-nanotube filled polyamide-6 and its blends with acrylonitrile/butadiene/styrene
O Meincke et al.
POLYMER (2004)
Carbon nanotube-filled polycarbonate composites produced by melt mixing and their use in blends with polyethylene
P Potschke et al.
CARBON (2004)
Micromoulding: process measurements, product morphology and properties
BR Whiteside et al.
PLASTICS RUBBER AND COMPOSITES (2004)
Static and dynamic wetting measurements of single carbon nanotubes
AH Barber et al.
PHYSICAL REVIEW LETTERS (2004)
Influence of viscosity ratio on the morphology of PVC/PE blends
ZP Fang et al.
EUROPEAN POLYMER JOURNAL (2000)