相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。The influence of through-thickness reinforcement geometry and pattern on delamination of fiber-reinforced composites: Part I - Experimental results
Georgios Pappas et al.
COMPOSITE STRUCTURES (2018)
The mechanical properties of 3D woven composites
R. Umer et al.
JOURNAL OF COMPOSITE MATERIALS (2017)
The influence of through-thickness reinforcement geometry and pattern on delamination of fiber-reinforced composites: Part II - Modeling
Georgios Pappas et al.
COMPOSITE STRUCTURES (2017)
Investigation of the Z-binder role in progressive damage of 3D woven composites
Nestor Castaneda et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
Influence of off-axis in-plane yarns on the mechanical properties of 3D composites
Ahmad Rashed Labanieh et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
Effect of tufting density and loop length on the crushing behaviour of tufted sandwich specimens
Jamie W. Hartley et al.
COMPOSITES PART B-ENGINEERING (2017)
Experimental investigations and variability considerations on 3D interlock textile composites used in low velocity soft impact loading
F. Dau et al.
COMPOSITE STRUCTURES (2016)
Numerical identification of classical and nonclassical moduli of 3D woven textiles and analysis of scale effects
Y. Rahali et al.
COMPOSITE STRUCTURES (2016)
Micro-mechanics based damage mechanics for 3D orthogonal woven composites: Experiment and numerical modelling
Mohamed Nasr Saleh et al.
COMPOSITE STRUCTURES (2016)
Characterising the loading direction sensitivity of 3D woven composites.: Effect of z-binder architecture
Mohamed Nasr Saleh et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Computation of the effective mechanical properties including nonclassical moduli of 2.5D and 3D interlocks by micromechanical approaches
Y. Rahali et al.
COMPOSITES PART B-ENGINEERING (2016)
Confluent 3D-assembly of fibrous structures
S. Kazemahvazi et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2016)
Effect of through-the-thickness areal density and yarn fineness on the mechanical performance of three-dimensional carbon-phenolic composites
Behzad Najafloo et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2016)
Manufacturing of composite parts reinforced through-thickness by tufting
G. Dell'Anno et al.
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2016)
Damage characteristics in 3D stitched composites with various stitch parameters under in-plane tension
Arief Yudhanto et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Experimental investigation of three-dimensional woven composites
Kyle C. Warren et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Influence of the tufting yarns on formability of tufted 3-Dimensional composite reinforcement
LingShan Liu et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Influence of z-pin length on the delamination fracture toughness and fatigue resistance of pinned composites
F. Pegorin et al.
COMPOSITES PART B-ENGINEERING (2015)
Kinematic modelling of 3D woven fabric deformation for structural scale features
Bassam El Said et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)
On-line monitoring of multi-component strain development in a tufting needle using optical fibre Bragg grating sensors
Edmon Chehura et al.
SMART MATERIALS AND STRUCTURES (2014)
Review and comparative study of analytical modeling for the elastic properties of textile composites
Ali Hallal et al.
COMPOSITES PART B-ENGINEERING (2013)
Influence of high-performance yarns degradation inside three-dimensional warp interlock fabric
Marie Lefebvre et al.
JOURNAL OF INDUSTRIAL TEXTILES (2013)
Influence of Fibre Architecture on Impact Damage Tolerance in 3D Woven Composites
P. Potluri et al.
APPLIED COMPOSITE MATERIALS (2012)
A modelling framework for composites containing 3D reinforcement
Fredrik Stig et al.
COMPOSITE STRUCTURES (2012)
Improved analytical model to predict the effective elastic properties of 2.5D interlock woven fabrics composite
Ali Hallal et al.
COMPOSITE STRUCTURES (2012)
Homogenization of the elastic behavior of a layer-to-layer angle-interlock composite
Patrick Lapeyronnie et al.
COMPOSITE STRUCTURES (2011)
Modeling strategies of 3D woven composites: A review
Mahmood Ansar et al.
COMPOSITE STRUCTURES (2011)
Stitch fiber comparison for improvement of interlaminar fracture toughness in stitched composites
K. T. Tan et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2011)
Mechanical performance of through-thickness tufted sandwich structures
Anamaria Henao et al.
COMPOSITE STRUCTURES (2010)
Effect of Z-yarns on the stiffness and strength of three-dimensional woven composites
M. P. Rao et al.
COMPOSITES PART B-ENGINEERING (2009)
Evaluation of the mechanical and damage behaviour of tufted non crimped fabric composites using full field measurements
M. Colin de Verdiere et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2009)
Review of z-pinned composite laminates
A. P. Mouritz
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
Exploring mechanical property balance in tufted carbon fabric/epoxy composites
Giuseppe Dell'Anno et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
3D reinforcement of stiffener-to-skin T-joints by Z-pinning and tufting
Denis D. R. Cartie et al.
ENGINEERING FRACTURE MECHANICS (2006)
Multi-scale modeling, stress and failure analyses of 3-D woven composites
A. E. Bogdanovich
JOURNAL OF MATERIALS SCIENCE (2006)
Delamination of Z-pinned carbon fibre reinforced laminates
DDR Cartié et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2006)
Properties and failure mechanisms of z-pinned laminates in monotonic and cyclic tension
P. Chang et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)
Experimental study on z-pin bridging law by pullout test
SC Dai et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2004)
Mechanisms of crack bridging by composite and metallic rods
DDR Cartie et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2004)
Static and fatigue behaviour of stitched graphite/epoxy composite laminates
F Aymerich et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2003)
Effect of weaving damage on the tensile properties of three-dimensional woven composites
L Lee et al.
COMPOSITE STRUCTURES (2002)
Mixed mode delamination of polymer composite laminates reinforced through the thickness by z-fibers
KL Rugg et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2002)
Some recent advances in the fabrication and design of three-dimensional textile preforms: a review
R Kamiya et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2000)
A mechanistic approach to the properties of stitched laminates
AP Mouritz et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2000)
分享论文
