相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Research of the Gurson damage model of the different yield functions during the deep-drawing process
Fan Xu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Numerical simulation of sheet metal blanking based on fully coupled elastoplasticity-damage constitutive equations accounting for yield surface distortion-induced anisotropy
Zhenming Yue et al.
INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2017)
Determination of an adequate geometry of the flanged hole to perform formed threads
Narjes Masmoudi et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
An extended GTN model for indentation-induced damage
Youbin Chen et al.
COMPUTATIONAL MATERIALS SCIENCE (2017)
A damage model for ductile porous materials with a spherically anisotropic matrix
V. Pensee et al.
INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2016)
3D Micromechanical Modeling of Failure and Damage Evolution in Dual Phase Steel Based on a Real 2D Microstructure
M. R. Ayatollahi et al.
ACTA MECHANICA SOLIDA SINICA (2016)
Failure analysis based on microvoids damage model for DP600 steel on in-situ tensile tests
P. J. Zhao et al.
ENGINEERING FRACTURE MECHANICS (2016)
Modified GTN model for a broad range of stress states and application to ductile fracture
Wei Jiang et al.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2016)
A damage mechanics model of materials with voids and cracks
In-Bong Kim et al.
INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2016)
Coupled modeling of anisotropy variation and damage evolution for high strength steel tubular materials
H. Li et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2016)
Formability of coated vinyl on sheet metal during deep drawing process
Yongbin Lim et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
Experimental and numerical analysis of micromechanical damage for DP600 steel in fine-blanking process
P. J. Zhao et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
Investigations of ductile damage in DP600 and DC04 deep drawing steel sheets during punching
Kerim Isik et al.
21ST EUROPEAN CONFERENCE ON FRACTURE, (ECF21) (2016)
Numerical determination of the forming limit curves of anisotropic sheet metals using GTN damage model
Abdolvahed Kami et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
Realistic microstructural RVE-based simulations of stress-strain behavior of a dual-phase steel having high martensite volume fraction
Jiming Zhou et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Implementation of a damage evolution law for dual-phase steels in Gurson-type models
Tudor Balan et al.
MATERIALS & DESIGN (2015)
Identification of fully coupled anisotropic plasticity and damage constitutive equations using a hybrid experimental-numerical methodology with various triaxialities
Z. M. Yue et al.
INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2015)
Prediction of damage in the hole-flanging process using a physically based approach
Ahmed Kacem et al.
INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2015)
Propagation of micro-cracks in viscoelastic materials: Analytical and numerical methods
S. T. Nguyen et al.
INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2015)
Predicting tensile stretchability of trimmed AA6111-T4 sheets
X. H. Hu et al.
COMPUTATIONAL MATERIALS SCIENCE (2014)
Characterization of ductile damage for a high carbon steel using 3D X-ray micro-tomography and mechanical tests - Application to the identification of a shear modified GTN model
T. -S. Cao et al.
COMPUTATIONAL MATERIALS SCIENCE (2014)
Healing and super healing in continuum damage mechanics
George Z. Voyiadjis et al.
INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2014)
Investigation of the rupture in tension and bending of DP980 steel sheet
A. Mishra et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2014)
An extended GTN model for ductile fracture under high and low stress triaxiality
L. Malcher et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2014)
Forming limit criterion for ductile anisotropic sheets as a material property and its deformation path insensitivity, Part II: Boundary value problems
Kwansoo Chung et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2014)
On the extension of the Gurson-type porous plasticity models for prediction of ductile fracture under shear-dominated conditions
Jun Zhou et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2014)
Ductility limit prediction using a GTN damage model coupled with localization bifurcation analysis
Lotfi Zoher Mansouri et al.
MECHANICS OF MATERIALS (2014)
Metamodelling with independent and dependent inputs
M. Munoz Zuniga et al.
COMPUTER PHYSICS COMMUNICATIONS (2013)
Failure prediction in the hole-flanging process of aluminium alloys
A. Kacem et al.
ENGINEERING FRACTURE MECHANICS (2013)
Evaluation of anisotropic constitutive models: Mixed anisotropic hardening and non-associated flow rule approach
Mohsen Safaei et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2013)
Prediction of ductile fracture for advanced high strength steel with a new criterion: Experiments and simulation
Yanshan Lou et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2013)
Experimental characterization and numerical modeling of micromechanical damage under different stress states
Mohamed Achouri et al.
MATERIALS & DESIGN (2013)
Forming limit diagram prediction of AA5052/polyethylene/AA5052 sandwich sheets
Jianguang Liu et al.
MATERIALS & DESIGN (2013)
Void growth and coalescence in ductile solids with stage III and stage IV strain hardening
L. Lecarme et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2011)
A modified damage model for advanced high strength steel sheets
Kwansoo Chung et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2011)
Void growth and coalescence in anisotropic plastic solids
S. M. Keralavarma et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2011)
Continuum Models of Ductile Fracture: A Review
J. Besson
INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2010)
Prediction of plane strain fracture of AHSS sheets with post-initiation softening
Yaning Li et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2010)
BENDING LIMIT PREDICTION OF AN ALUMINUM THIN SHEET
S. Thuillier et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2010)
The GTN damage model based on Hill'48 anisotropic yield criterion and its application in sheet metal forming
Chen Zhiying et al.
COMPUTATIONAL MATERIALS SCIENCE (2009)
Aluminum alloy damage evolution for different strain paths - Application to hemming process
N. Le Maout et al.
ENGINEERING FRACTURE MECHANICS (2009)
Damage-based finite-element modeling of tube hydroforming
Cliff Butcher et al.
INTERNATIONAL JOURNAL OF FRACTURE (2009)
Predicting failure modes and ductility of dual phase steels using plastic strain localization
X. Sun et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2009)
On the numerical prediction of the ductile fracture in metal forming
K. Saanouni
ENGINEERING FRACTURE MECHANICS (2008)
A ductile fracture analysis using a local damage model
N. Benseddiq et al.
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2008)
A constitutive model for elastoplastic solids containing primary and secondary voids
D. Fabregue et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2008)
A coupled elastoplastic damage model for semi-brittle materials and extension to unsaturated conditions
JF Shao et al.
MECHANICS OF MATERIALS (2006)
Synergistic effects of plastic anisotropy and void coalescence on fracture mode in plane strain
AA Benzerga et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2002)