期刊
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY
卷 15, 期 6, 页码 1467-1477出版社
WILEY
DOI: 10.1111/ijac.12906
关键词
composites; fly ash; fly ash cenospheres; thermal conductivity
资金
- UGC-SAP
Light weight fly ash cenosphere (FAC) ceramic composites were developed by simple slip casting method. Thermal properties, Bulk density, Microstructure, flexural strength, and phase analysis of the FAC ceramic composites were measured. The results proved that the FAC have ability to lower bulk density and thermal conductivity effectively. The lowest thermal conductivity achieved for FAC ceramic composites (0.27W/m.K) was further reduced 0.21W/m.K by adding combustible additives ie activated charcoal and corn starch. The flexural strength, bulk density and thermal conductivity of FAC ceramic composites reduced consistently with an increase in FAC content. The maximum flexural strength of 13.45MPa was achieved with 50% FAC and the minimum flexural strength of 4.07MPa was obtained with 80% FAC. The open porosity increased from 35.51% to 43.76% and 38.19% with an addition of 15% activated charcoal and corn starch, respectively, when compared to no additives. The bulk density of 699, 619, and 675kg/m(3) was achieved with 80% FAC, 80% FAC with the addition of 15% activated charcoal and corn starch, respectively. The 80% FAC ceramic composite shows low thermal expansion coefficient 6.54x10(-6)/degrees C at the temperature of 50 degrees C then it varies between 3.7 and 5x10(-6)/degrees C in the temperature range above 100 degrees C. These results prove that the developed light weight FAC ceramic are excellent low-cost thermal insulating materials.
作者
我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。
推荐
暂无数据