相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Experimental research on semiconductor shaping by abrasive-spark hybrid machining
Weiwei Zhou et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Ultrasonic assisted high rotational speed diamond machining of dental glass ceramics
Xiao-Fei Song et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Surface integrity and corrosion performance of biomedical magnesium-calcium alloy processed by hybrid dry cutting-finish burnishing
M. Salahshoor et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2018)
Friction and wear performance on ultrasonic vibration assisted grinding dental zirconia ceramics against natural tooth
Kan Zheng et al.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2017)
Effects of hybrid electrical discharge machining processes on surface integrity and residual stresses of Ti-6Al-4V titanium alloy
Behnam Khosrozadeh et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Influence of tool inclination on chip formation process and roughness response in ball-end milling of freeform surfaces on Ti-6Al-4V alloy
Jorge Andres Garcia-Barbosa et al.
MACHINING SCIENCE AND TECHNOLOGY (2017)
Curve micromachining on the edges of nitinol biliary stent by ultrashort pulses laser
Chia-Hung Hung et al.
OPTICS AND LASER TECHNOLOGY (2017)
Fibre laser cutting of polycaprolactone sheet for stents manufacturing: A feasibility study
Antonio J. Guerra et al.
OPTICS AND LASER TECHNOLOGY (2017)
Role of anisotropic properties on topology optimization of additive manufactured load bearing structures
Pu Zhang et al.
SCRIPTA MATERIALIA (2017)
NiTi shape memory alloy with enhanced wear performance by laser selective area nitriding for orthopaedic applications
C. H. Ng et al.
SURFACE & COATINGS TECHNOLOGY (2017)
Side Milling Machining Simulation Using Finite Element Analysis: Prediction of Cutting Forces
A. Mebrahitom et al.
MATERIALS TODAY-PROCEEDINGS (2017)
Burr Reduction of Micro-milled Microfluidic Channels Mould Using a Tapered Tool
Kushendarsyah Saptaji et al.
ADVANCES IN MATERIAL & PROCESSING TECHNOLOGIES CONFERENCE (2017)
Increasing efficiency of Ti-alloy machining by cryogenic cooling and using ethanol in MRF
G. Krishnamurthy et al.
CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2017)
The design and manufacture of a prototype personalized liner for lower limb amputees
Vimal Dhokia et al.
COMPLEX SYSTEMS ENGINEERING AND DEVELOPMENT (2017)
Effect of laser surface texturing on primary stability and surface properties of zirconia implants
C. G. Moura et al.
CERAMICS INTERNATIONAL (2017)
Recent advances in bulk metallic glasses for biomedical applications
H. F. Li et al.
ACTA BIOMATERIALIA (2016)
Bulk Metallic Glasses for Implantable Medical Devices and Surgical Tools
Philip Meagher et al.
ADVANCED MATERIALS (2016)
Texturing of polypropylene (PP) with nanosecond lasers
A. Riveiro et al.
APPLIED SURFACE SCIENCE (2016)
Effect of multiple passes treatment in waterjet peening on fatigue performance
Azmir Azhari et al.
APPLIED SURFACE SCIENCE (2016)
Hybrid additive and subtractive machine tools - Research and industrial developments
Joseph M. Flynn et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2016)
Material constitutive model and chip separation criterion influence on the modeling of Ti6Al4V machining with experimental validation in strictly orthogonal cutting condition
F. Ducobu et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2016)
Morphology and structural studies of laser treated 45S5 bioactive glass
K. Sharma et al.
JOURNAL OF NON-CRYSTALLINE SOLIDS (2016)
On the fatigue behavior of medical Ti6Al4V roughened by grit blasting and abrasiveless waterjet peening
M. Lieblich et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2016)
A review on nozzle wear in abrasive water jet machining application
H. Syazwani et al.
2ND INTERNATIONAL MANUFACTURING ENGINEERING CONFERENCE AND 3RD ASIA-PACIFIC CONFERENCE ON MANUFACTURING SYSTEMS (IMEC-APCOMS 2015) (2016)
Effect of High-speed Milling tool path strategies on the surface roughness of Stavax ESR mold insert machining
A. Mebrahitom et al.
2ND INTERNATIONAL MANUFACTURING ENGINEERING CONFERENCE AND 3RD ASIA-PACIFIC CONFERENCE ON MANUFACTURING SYSTEMS (IMEC-APCOMS 2015) (2016)
Fiber laser microcutting of AISI 316L stainless steel tubes- influence of pulse energy and spot overlap on back wall dross
Garcia-Lopez Erika et al.
SECOND CIRP CONFERENCE ON BIOMANUFACTURING (2016)
The State of the Art in the Electron Beam Manufacturing Processes
Jisoo Kim et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2016)
Pulsed Laser Cutting of Magnesium-Calcium for Biodegradable Stents
M. P. Sealy et al.
18TH CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING (ISEM XVIII) (2016)
Effect of aluminum content on machining characteristics of AZ31 and AZ91 magnesium alloys during drilling
B. Ratna Sunil et al.
JOURNAL OF MAGNESIUM AND ALLOYS (2016)
Improvement of Geometrical Accuracy of Micro Holes Machined Through Micro Abrasive Jet Machining
Kumar Abhishek et al.
7TH HPC 2016 - CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING (2016)
Micro-drilling and threading of the Ti6Al4V titanium alloy produced through Additive Manufacturing
Zdenka Rysava et al.
7TH HPC 2016 - CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING (2016)
Statistical characteristics of surface integrity by fiber laser cutting of Nitinol vascular stents
C. H. Fu et al.
APPLIED SURFACE SCIENCE (2015)
On the surface characteristics of a Zr-based bulk metallic glass processed by microelectrical discharge machining
Hu Huang et al.
APPLIED SURFACE SCIENCE (2015)
Optimization of process parameters for surface roughness and microhardness in dry milling of magnesium alloy using Taguchi with grey relational analysis
Kaining Shi et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
3-D finite element process simulation of micro-end milling Ti-6Al-4V titanium alloy: Experimental validations on chip flow and tool wear
Thanongsak Thepsonthi et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
Effect of cryogenic compressed air on the evolution of cutting force and tool wear during machining of Ti-6Al-4V alloy
Shoujin Sun et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
Cutting Characteristics of Zr-Based Bulk Metallic Glass
D. X. Han et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2015)
Mg-based bulk metallic glasses for biodegradable implant materials: A review on glass forming ability, mechanical properties, and biocompatibility
M. S. Dambatta et al.
JOURNAL OF NON-CRYSTALLINE SOLIDS (2015)
Fundamental Investigations Into Burr Formation and Damage Mechanisms in the Micro-Milling of a Biomedical Grade Polymer
Paul Ervine et al.
MACHINING SCIENCE AND TECHNOLOGY (2015)
3D printing of biomaterials
Amit Bandyopadhyay et al.
MRS BULLETIN (2015)
Micromachining NiTi tubes for use in medical devices by using a femtosecond laser
Chia-Hung Hung et al.
OPTICS AND LASERS IN ENGINEERING (2015)
Hybrid micro-machining processes: A review
Saeed Zare Chavoshi et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2015)
Recent advances on the development of magnesium alloys for biodegradable implants
Yongjun Chen et al.
ACTA BIOMATERIALIA (2014)
Large pulsed electron beam surface treatment of translucent PMMA
Hyung Wook Park et al.
APPLIED SURFACE SCIENCE (2014)
Laser surface modification of ultra-high-molecular-weight polyethylene (UHMWPE) for biomedical applications
A. Riveiro et al.
APPLIED SURFACE SCIENCE (2014)
Multi-material metallic structure fabrication using electron beam melting
Cesar A. Terrazas et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
Problems and solutions in machining of titanium alloys
A. Pramanik
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
Application of a hybrid process for high precision manufacture of difficult to machine prismatic parts
Zicheng Zhu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
An integrated toolpath and process parameter optimization for high-performance micro-milling process of Ti-6Al-4V titanium alloy
Thanongsak Thepsonthi et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
Theoretical model for cutting force in rotary ultrasonic milling of dental zirconia ceramics
Xingzhi Xiao et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
Biodegradable magnesium coronary stents: material, design and fabrication
Ali Goekhan Demir et al.
INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING (2014)
On the mechanics of chip formation in Ti-6Al-4V turning with spindle speed variation
Elio Chiappini et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2014)
Development of a hybrid rapid prototyping system using low-cost fused deposition modeling and five-axis machining
Wei-chen Lee et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)
Development of functional biomaterials with micro- and nanoscale technologies for tissue engineering and drug delivery applications
Hojae Bae et al.
JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2014)
Effects of Cutting Angles in Ti-6al-4v Milling Process on Surface Integrity: Influence of Roughness and Residual Stresses on Fatigue Limit
Adrien Cellier et al.
MACHINING SCIENCE AND TECHNOLOGY (2014)
EXPERIMENTAL STUDY ON CUTTING FORCES AND SURFACE INTEGRITY IN HIGH-SPEED SIDE MILLING OF Ti-6Al-4V TITANIUM ALLOY
Fuzeng Wang et al.
MACHINING SCIENCE AND TECHNOLOGY (2014)
Micro-end milling of NiTi biomedical alloys, burr formation and phase transformation
R. Piquard et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2014)
Additive manufacturing in prosthesis development - a case study
Palash Kumar Maji et al.
RAPID PROTOTYPING JOURNAL (2014)
Biomanufacturing
Mamoru Mitsuishi et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2013)
On geometrical accuracy and integrity of surfaces in multi-mode abrasive waterjet machining of NiTi shape memory alloys
Ming Chu Kong et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2013)
Surface finish of bulk metallic glass using sequential abrasive jet polishing and annealing processes
Fang-Jung Shiou et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Very high speed cutting of Ti-6A1-4V titanium alloy - change in morphology and mechanism of chip formation
G. Sutter et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2013)
Long-Term Performance of Ceramic and Metal Femoral Heads on Conventional Polyethylene in Young and Active Patients A Matched-Pair Analysis
Morteza Meftah et al.
JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME (2013)
Orthogonal Microcutting of Thin Workpieces
Saptaji Kushendarsyah et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2013)
Improvement effects of vibration on cutting force in rotary ultrasonic machining of BK7 glass
Dongxi Lv et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2013)
Waterjet drilling in porcine bone: The effect of the nozzle diameter and bone architecture on the hole dimensions
Steven den Dunnen et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2013)
Pure Waterjet Drilling of Articular Bone: An in vitro Feasibility Study
Steven den Dunnen et al.
STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING (2013)
Tool-wear analysis in cryogenic machining of NiTi shape memory alloys: A comparison of tool-wear performance with dry and MQL machining
Y. Kaynak et al.
WEAR (2013)
Influence of Material Microstructures in Micromilling of Ti6Al4V Alloy
Aldo Attanasio et al.
MATERIALS (2013)
Effect of Ultrasonic Vibration in Grinding; Horn Design and Experiment
Young-Jae Choi et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2013)
Adaptable Orthopedic Shape Memory Implants
Ronny Pfeifer et al.
FIRST CIRP CONFERENCE ON BIOMANUFACTURING (2013)
Influence of Electro Discharge Machining of Biodegradable Magnesium on the Biocompatibility
F. Klocke et al.
FIRST CIRP CONFERENCE ON BIOMANUFACTURING (2013)
Manufacturing conditioned wear of all-ceramic knee prostheses
Berend Denkena et al.
FIRST CIRP CONFERENCE ON BIOMANUFACTURING (2013)
Laser surface modification of PEEK
A. Riveiro et al.
APPLIED SURFACE SCIENCE (2012)
Biomedical production of implants by additive electro-chemical and physical processes
Paulo Bartolo et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2012)
Enhanced osteoblast response to electrical discharge machining surface
Fukunaga Otsuka et al.
DENTAL MATERIALS JOURNAL (2012)
Experimental investigation on chip morphologies in high-speed dry milling of titanium alloy Ti-6Al-4V
Anhai Li et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)
An experimental study of process variables in turning operations of Ti-6Al-4V and Cr-Co spherical prostheses
J. V. Abellan-Nebot et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)
Improving surface hardness of austenitic stainless steel using waterjet peening process
Azmir Azhari et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)
Electrical discharge machining of Ti6Al4V with a bundled electrode
Lin Gu et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2012)
Micromachining of ceramic surfaces: Hydroxyapatite and zirconia
Marzellus Grosse Holthaus et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2012)
Abrasive waterjet machining of three-dimensional structures from bulk metallic glasses and comparison with other techniques
Victor Wessels et al.
JOURNAL OF MATERIALS RESEARCH (2012)
Effect of side edge angle and effective rake angle on top burrs in micro-milling
Kushendarsyah Saptaji et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2012)
Electron-beam irradiation of polymer bracket materials
Andreas Faltermeier et al.
AMERICAN JOURNAL OF ORTHODONTICS AND DENTOFACIAL ORTHOPEDICS (2011)
Experiments and finite element simulations on micro-milling of Ti-6Al-4V alloy with uncoated and cBN coated micro-tools
T. Oezel et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2011)
Achieving Small Structures in Thin NiTi Sheets for Medical Applications with Water Jet and Micro Machining: A Comparison
M. Frotscher et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2011)
Challenges in using waterjet machining of NiTi shape memory alloys: An analysis of controlled-depth milling
M. C. Kong et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2011)
Ion implantation of titanium based biomaterials
Tapash R. Rautray et al.
PROGRESS IN MATERIALS SCIENCE (2011)
Roughening of metallic biomaterials by abrasiveless waterjet peening: Characterization and viability
S. Barriuso et al.
WEAR (2011)
The electron beam deposition of titanium on polyetheretherketone (PEEK) and the resulting enhanced biological properties
Cheol-Min Han et al.
BIOMATERIALS (2010)
The effect of Electro Discharge Machining (EDM) on the corrosion resistance of dental alloys
Argyro Ntasi et al.
DENTAL MATERIALS (2010)
Mechanical evaluation of porous titanium (Ti6Al4V) structures with electron beam melting (EBM)
Jayanthi Parthasarathy et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2010)
Properties and Clinical Application of Three Types of Dental Glass-Ceramics and Ceramics for CAD-CAM Technologies
Christian Ritzberger et al.
MATERIALS (2010)
Ion beam, focused ion beam, and plasma discharge machining
D. M. Allen et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2009)
A review of dental CAD/CAM: current status and future perspectives from 20 years of experience
Takashi Miyazaki et al.
DENTAL MATERIALS JOURNAL (2009)
Waterjet-An innovative tool for manufacturing
Janet Folkes
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Cutting Mechanics of Bulk Metallic Glass Materials on Meso-End Milling
M. Bakkal et al.
MATERIALS AND MANUFACTURING PROCESSES (2009)
Cellular Ti-6Al-4V structures with interconnected macro porosity for bone implants fabricated by selective electron beam melting
Peter Heinl et al.
ACTA BIOMATERIALIA (2008)
Laser beam machining - A review
Avanish Kumar Dubey et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2008)
Mechanical biocompatibilities of titanium alloys for biomedical applications
Mitsuo Niinomi
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2008)
Machining NiTi micro-parts by micro-milling
K. Weinert et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Waterjet peening and surface preparation at 600 MPa: A preliminary experimental study
A. Chillman et al.
JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME (2007)
Micro-machining of metals, ceramics and polymers using nanosecond lasers
M. R. H. Knowles et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2007)
Biocompatible magnesium alloys as absorbable implant materials - Adjusted surface and subsurface properties by machining processes
B. Denkena et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2007)
Optimization of titanium cutting by factorial analysis of the pulsed Nd:YAG laser parameters
I. A. Almeida et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2006)
A novel surface modification technique for the introduction of compressive residual stress and preliminary studies on Al alloy AA6063
A. Sahaya Grinspan et al.
SURFACE & COATINGS TECHNOLOGY (2006)
Simulation of multiple laser shock peening of a 35CD4 steel alloy
Kan Ding et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2006)
Ultrasonic machining of titanium and its alloys: A review
R Singh et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2006)
Improving fatigue strength of metals using abrasive waterjet peening
D. Arola et al.
MACHINING SCIENCE AND TECHNOLOGY (2006)
A review on high-speed machining of titanium alloys
M Rahman et al.
JSME INTERNATIONAL JOURNAL SERIES C-MECHANICAL SYSTEMS MACHINE ELEMENTS AND MANUFACTURING (2006)
Cutting of 1.2 mm thick austenitic stainless steel sheet using pulsed and CWNd:YAG laser
KA Ghany et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2005)
Experimental investigations of the machinability of Ni50.6Ti49.4 alloy
H Huang et al.
SMART MATERIALS & STRUCTURES (2005)
Electron beam irradiation of dental composites
M Behr et al.
DENTAL MATERIALS (2005)
Machining of a Zr-Ti-Al-Cu-Ni metallic glass
M Bakkal et al.
SCRIPTA MATERIALIA (2004)
Oxidation and crystallization of Zr-based bulk metallic glass due to machining
M Bakkal et al.
INTERMETALLICS (2004)
Electro discharge machining of nickel-titanium shape memory alloys
W Theisen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Chip formation, cutting forces, and tool wear in turning of Zr-based bulk metallic glass
M Bakkal et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2004)
Abrasive water jet cutting as a new procedure for cutting cancellous bone -: In vitro testing in comparison with the oscillating saw
K Schwieger et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2004)
Machining of low electrical conductive materials by wire electrical discharge machining (WEDM)
J Kozak et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)
Laser beam machining (LBM), state of the art and new opportunities
J Meijer
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)
Sol-gel deposited TiO2 film on NiTi surgical alloy for biocompatibility improvement
JX Liu et al.
THIN SOLID FILMS (2003)
An in vivo study of bone response to implants topographically modified by laser micromachining
C Hallgren et al.
BIOMATERIALS (2003)
Micro/nano machining of polymeric substrates by ion beam techniques
W He et al.
MICROELECTRONIC ENGINEERING (2003)
The effect of sandblasting treatment on endurance properties of titanium alloy hip prostheses
M Baleani et al.
ARTIFICIAL ORGANS (2000)
Ion-beam-assisted deposition (IBAD) of hydroxyapatite coating layer on Ti-based metal substrate
JM Choi et al.
BIOMATERIALS (2000)