相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。FE simulation of linear and elliptical ultrasonic vibrations in turning of Inconel 718
Mohammad Lotfi et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING (2018)
Modeling of the effects of phase shift on cutting performance in elliptical vibration cutting
Wu-Le Zhu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Material removal model of ultrasonic elliptical vibration-assisted chemical mechanical polishing for hard and brittle materials
Defu Liu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Effects of channel shape on the cooling performance of hybrid micro-channel and slot-jet module
Yanjun Zhang et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)
Surface roughness of two-frequency elliptical vibration texturing (TFEVT) method for micro-dimple pattern process
Rendi Kurniawan et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2017)
Development of a two-frequency, elliptical-vibration texturing device for surface texturing
Rendi Kurniawan et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2017)
Analytical design method of a device for ultrasonic elliptical vibration cutting
Weihai Huang et al.
JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA (2017)
Mirror surface machining of high-alloy steels by elliptical vibration cutting with single-crystalline diamond tools Influence of alloy elements on diamond tool damage
Hiroshi Saito et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2017)
Feasibility study of ultrasonic elliptical vibration-assisted reaming of carbon fiber reinforced plastics/titanium alloy stacks
Daxi Geng et al.
ULTRASONICS (2017)
A critical assessment of surface texturing for friction and wear improvement
C. Gachot et al.
WEAR (2017)
Structural coloration of metallic surfaces with micro/nano-structures induced by elliptical vibration texturing
Yang Yang et al.
APPLIED SURFACE SCIENCE (2017)
Analysis and modeling of force in orthogonal elliptical vibration cutting
Wei Bai et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Mechanism and suppression of frictional chatter in high-efficiency elliptical vibration cutting
Hongjin Jung et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2016)
Surface Texture Manufacturing Techniques and Tribological Effect of Surface Texturing on Cutting Tool Performance: A Review
A. Arslan et al.
CRITICAL REVIEWS IN SOLID STATE AND MATERIALS SCIENCES (2016)
Review of micro/nano machining by utilizing elliptical vibration cutting
Jianguo Zhang et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2016)
Micro-dimple pattern process and orthogonal cutting force analysis of elliptical vibration texturing
Rendi Kurniawan et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2016)
Study on predictive model of cutting force and geometry parameters for oblique elliptical vibration cutting
Lin Jieqiong et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2016)
Recent advances in turning with textured cutting tools: A review
Varun Sharma et al.
JOURNAL OF CLEANER PRODUCTION (2016)
Theoretical study on brittle-ductile transition behavior in elliptical ultrasonic assisted grinding of hard brittle materials
J. B. Chen et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2016)
Application of sustainable techniques in metal cutting for enhanced machinability: a review
Chetan et al.
JOURNAL OF CLEANER PRODUCTION (2015)
Ultra-precision nano-structure fabrication by amplitude control sculpturing method in elliptical vibration cutting
Jianguo Zhang et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2015)
Analysis of cutting forces in the ultrasonic elliptical vibration-assisted micro-groove turning process
Chen Zhang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Friction reduction on cylindrical surfaces by texturing with a piezoelectric actuated tool holder
Rendi Kurniawan et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2015)
Elliptic vibration-assisted cutting of fibre-reinforced polymer composites: Understanding the material removal mechanisms
Weixing Xu et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2014)
Fast Generation of Micro-Channels on Cylindrical Surfaces by Elliptical Vibration Texturing
Ping Guo et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2014)
Fundamental investigation of ultra-precision ductile machining of tungsten carbide by applying elliptical vibration cutting with single crystal diamond
Jianguo Zhang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)
The effect of spindle speed, feed-rate and machining time to the surface roughness and burr formation of Aluminum Alloy 1100 in micro-milling operation
G. Kiswanto et al.
JOURNAL OF MANUFACTURING PROCESSES (2014)
Modeling of the effect of tool edge radius on surface generation in elliptical vibration cutting
Xinquan Zhang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Experimental study on cutting temperature and cutting force in dry turning of titanium alloy using a non-coated micro-grooved tool
J. Xie et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2013)
Fabrication of micro-lenticular patterns using WEDM-grooving and electrolytic polishing
Jong Wuk Park et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2013)
Development of a tertiary motion generator for elliptical vibration texturing
Ping Guo et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2013)
Modeling of surface texturing in hydrodynamic lubrication
Izhak Etsion
FRICTION (2013)
An analytical force model for orthogonal elliptical vibration cutting technique
Xinquan Zhang et al.
Journal of Manufacturing Processes (2012)
Modeling of the Effect of Machining Parameters on Maximum Thickness of Cut in Ultrasonic Elliptical Vibration Cutting
Chandra Nath et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2011)
Experimental study on ultrasonic elliptical vibration cutting of hardened steel using PCD tools
Xinquan Zhang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2011)
Analysis of regenerative chatter suppression with adding the ultrasonic elliptical vibration on the cutting tool
Chunxiang Ma et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2011)
Orientation effects of micro-grooves on sliding surfaces
Sihuan Yuan et al.
TRIBOLOGY INTERNATIONAL (2011)
Direct Machining of Micro Patterns on Nickel Alloy and Mold Steel by Vibration Assisted Cutting
Gi Dae Kim et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2011)
Ultraprecision finishing of micro-aspheric surface by ultrasonic two-axis vibration assisted polishing
H. Suzuki et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2010)
Machining of micro-channels and pyramid patterns using elliptical vibration cutting
Gi Dae Kim et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2010)
Fabricating microgrooves with varied cross-sections by electrodischarge machining
Jiwang Van et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2010)
Nondestructive characterization of microstructures and determination of elastic properties in plain carbon steel using ultrasonic measurements
Vera Lucia de Araujo Freitas et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Machinability study of tungsten carbide using PCD tools under ultrasonic elliptical vibration cutting
Chandra Nath et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2009)
A study on ultrasonic elliptical vibration cutting of tungsten carbide
C. Nath et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Development of a cutting tool with a nano/micro-textured surface-Improvement of anti-adhesive effect by considering the texture patterns
Tatsuya Sugihara et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2009)
Development of cutting tools with microscale and nanoscale textures to improve frictional behavior
Noritaka Kawasegi et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2009)
Analysis of 3D elliptical vibration cutting with thin shear plane model
E. Shamoto et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2008)
Characteristics of elliptical vibration cutting in micro-V grooving with variations in the elliptical cutting locus and excitation frequency
Gi Dae Kim et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2008)
Characteristics of chip formation in micro V-grooving using elliptical vibration cutting
Gi Dae Kim et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2007)
An ultrasonic elliptical vibration cutting device for micro V-groove machining: Kinematical analysis and micro V-groove machining characteristics
Gi Dae Kim et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2007)
Effect of plastic side flow on surface roughness in micro-turning process
Kai Liu et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2006)
Suppression of burrs in turning with ultrasonic elliptical vibration cutting
CX Ma et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2005)
Effects of cutting edge geometry, workpiece hardness, feed rate and cutting speed on surface roughness and forces in finish turning of hardened AISI H13 steel
T Özel et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2005)
Study of machining accuracy in ultrasonic elliptical vibration cutting
CX Ma et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2004)
Effect of surface texturing on friction reduction between ceramic and steel materials under lubricated sliding contact
M Wakuda et al.
WEAR (2003)
Manufacture of multiple-focus micro Fresnel lenses by means of nonrotational diamond grooving
Y Takeuchi et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2002)
Development of ultraprecision micro grooving (Manufacture of V-shaped groove)
K Sawada et al.
JSME INTERNATIONAL JOURNAL SERIES C-MECHANICAL SYSTEMS MACHINE ELEMENTS AND MANUFACTURING (2000)
分享论文
