Thermometry of combustion gas measuring two-band near-infrared emissions less than 1.1 mu m from water molecules

Thermometry using two-band near-infrared (NIR) emissions less than 1.1 mu m has been implemented for combustion gases formed on a flat flame burner. The gas temperature was calibrated using a SiC thin filament pyrometry (TFP) above 1500 K for H-2/air and CH4/air mixtures. The emission spectra were measured with a spectrometer and a monochrome CMOS sensor with an image doubler and two bandpass filters. Two pairs of bandpass filters (850 nm/925 nm and 975 nm/925 nm) were tested to measure temperature. Results indicated that strong H2O emissions existed in the MR region, and they became stronger with an increase in the temperature. The CO2 emission spectra in the NIR region were negligible compared to that of H2O. Calibration temperature lines were obtained as a function of the intensity ratio of the two-band emissions in the NIR region. Using a CMOS camera, the uncertainties of temperature were 59 K for 850 nm/925 nm and 145 K for 975 nm/925 nm. The resolutions were 0.7 K for 850 run/925 run and 1 K for 975 nm/925 nm. Using the calibration line, two-dimensional temperature measurements were performed for H-2/air flames, CH4/air flames and Bunsen flames of 13A city gas. For the high temperature region above 1500 K, a quantitative two-dimensional temperature field was measured for lean and rich combustion. In addition, temperature measurement at high pressure was conducted for combustion gas of propane/air mixture with the equivalence ratio of 0.7 using a rapid compression machine. Temperature could be estimated using the calibration line obtained for the flat flame burner. We have demonstrated the performance and the possibility of thermometry two-band H2O emissions in the NIR region.