Automated measurements of discontinuity geometric properties from a 3D-point cloud based on a modified region growing algorithm

An approach was proposed to automatically measure the discontinuity geometric properties from a point cloud acquired using Light Detection and Ranging (LiDAR). The procedure primarily includes the following features: (Assali et al., 2016) Grid data from the point cloud was created to enhance computational efficiency for data processing and retrieval; (Barton & Choubey, 1977) A modified region growing (MRG) algorithm, which is characterized by more efficient grow criterion, was used to recognize discontinuities from the point cloud; (Cao et al., 2017) Four geometric properties from identified discontinuities were calculated based on analytic geometry; (Chen et al., 2016) Influence of threshold T on the identified results was investigated through sensitivity analysis, and threshold T was suggested to be less than the minimum normal difference among all joints and larger than 0 degrees. Two cases (regular polyhedrons and a tunnel in the Rumei hydropower station) were taken as case studies to validate the developed approach, and calculation results have good agreement with real situations.