期刊
COMPOSITES PART B-ENGINEERING
卷 149, 期 -, 页码 206-215出版社
ELSEVIER SCI LTD
DOI: 10.1016/j.compositesb.2018.05.035
关键词
Bio-sourced material; 3D printing; Carbonization; Electrical conductivity; Energy storage device
资金
- Grenoble-INP
- Grenoble Alpes University (Grant AGIR)
- PolyNat Carrot Institute (Investissements d'Avenir) [ANR-16-CARN-0025-01]
- [ANR-11-LABX-0030]
In the present work, electrically conductive and mechanically resistant carbon structures were elaborated by 3D printing and subsequent pyrolysis using microfibrillated cellulose/lignosulfonate/cellulose powder (labeled as MFC/LS/CP) blends. The processability of MFC/LS/CP slurries by 3D printing was examined by rheological tests in both steady flow and thixotropic modes. The printed MFC/LS/CP pastes were self-standing, provided a high printing definition and were proved to be morphologically stable to air drying and the subsequent pyrolysis. Pyrolysis at a slow rate (0.2 degrees C/min) to a final temperature ranging between 400 and 1200 degrees C was used to manufacture MFC/LS/CP carbons. The TGA/DTG was applied to monitor the thermal degradation of MFC/LS/CP materials in blends as well as in a separated form. The resulting carbons were further characterized in terms of morphology, microstructure and physical properties (such as density, electrical conductivity and mechanical strength). At 900 degrees C, MFC/LS/CP carbons displayed a high electrical conductivity of 47.8 S/cm together with a low density of 0.74 g/cm(3) and a porosity of 0.58. They also achieved an elastic modulus of 6.62 GPa. Such interesting electrical and mechanical properties would lead to a promising application of MFC/LS/CP-derived biocarbons in energy storage devices as electrode materials in close future.
作者
我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。
推荐
暂无数据