Removal of emerging micropollutants from wastewater by activated carbon adsorption: Experimental study of different activated carbons and factors influencing the adsorption of micropollutants in wastewater

Activated carbon processes, initially designed for drinking water production, are tested for wastewater application in order to characterize their efficiency to remove micropollutants from wastewater treatment plants (WWTPs) discharges. In that purpose, a pilot was studied by the Paris sanitation service (SIAAP) and the water environment and urban systems laboratory (LEESU). The in-situ study raised several additional questions related to the structural and morphological properties of activated carbons, in order to select the proper material, the influence of operational parameters such as the activated carbon dose and the contact time, the role of organic matter concentration and composition, the presence of a residual concentration of methanol or the impact of ferric chloride addition. Thus, various complementary experiments were carried out at laboratory scale to improve the understanding of the micropollutants adsorption process on activated carbon, in particular on powdered activated carbon (PAC). The results have highlighted a strong link between the efficiency of PACs and their specific surface (BET), which can be easily estimated by their bulk density. The study of the sorption process has also confirmed the strong influence of the PAC dose and the rapidity of the sorption kinetic. From an operational point of view, the ferric chloride injection seems to slightly improve most of the detected compounds adsorption, probably thanks to the coagulation of the dissolved organic matter colloidal fraction. In contrary, the presence in the water of a residual concentration of methanol seems to have no impact on the micropollutant fate. The influence of the wastewater matrix is strong, with notably lower adsorption in water from primary settling compared to various WWTP discharges. However, the dissolved organic carbon concentration is not always sufficient to explain sorption competitions in wastewater, and the nature of the organic matter should be considered too. In particular, the carbon removal from biological treatments is the step that clearly modifies both the quantity and the composition of the organic matter. It has been observed that discharges from WWTPs operating with different biological processes (activated sludge, membrane bioreactor or biofiltration) have similar organic matter concentrations and compositions, and allows comparable removals of organic matter and micropollutants by adsorption. The lower performances on micropollutants observed in the settled water can be explained by the higher quantity of protein-like molecules (fluorophores I delta and I gamma), which compose the most competitive organic matter fraction for adsorption on activated carbon, compared to the other waters. (C) 2016 Elsevier Ltd. All rights reserved.