期刊
APPLIED THERMAL ENGINEERING
卷 129, 期 -, 页码 269-279出版社
PERGAMON-ELSEVIER SCIENCE LTD
DOI: 10.1016/j.applthermaleng.2017.10.030
关键词
Thermal energy storage; Phase change materials; Heat transfer enhancement; Angled fins; Natural convection
资金
- Energy Innovation Research Programme (EIRP) [NRF2013EWT-EIRP001-017]
- National Research Foundation (NRF) Singapore
We present numerical investigations on a thermal energy storage system with phase change materials (PCMs) vertically heated from one side of a rectangular enclosure. A transient numerical model is developed to study the heat transfer and melting behaviors, and the natural convection is accounted. To suppress the non-uniform heat transfer for the PCM melting enhancement, fins with the inclined angle of 0, +15 degrees, +30 degrees ,-15 degrees and -30 degrees are proposed. The melt fraction contours with the natural convection driven flow are performed and compared, as well as the temperature distributions. Results show that the fins in a downward angle of 15 accelerate the PCM melting faster than the others, as the part of heat is well transferred to the bottom of container along the fins and the original non-uniform melting caused by natural convection is reduced. Contrarily, the upward fins in +15 degrees and +30 degrees deepen the non-uniform heat distribution And slow down the melting. The saved PCM melting time is defined on the basis of the No Fin PCM case. It is found that saved melting time of PCMs with 15 fins increases 23.8% on the case of the 0 fins, while decreases 45.2% and 71.4% with the +15 degrees and +30 degrees fins. The fin length and heat flux input are also examined for the PCM melting. The fin length shows the significant influence on the PCM melting with the tilted fins. As the length ratio of fin to container increases to 0.75, the non-uniform melting is obviously suppressed due to the addition of the 15 fins, and temperature contours inside the PCM domain show much more uniform, by comparing with 0 fins. The PCM melting rate with 15 fins also increases greatly and the saved melting time rises about 62.7%. Besides, the enhancement ratio reveals that the melting enhancement by the fins mainly appears at the second half of the entire process, based on the PCM solid-liquid interface formed at the first half. (C) 2017 Elsevier Ltd. All rights reserved.
作者
我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。
推荐
暂无数据