High-performance field-effect transistors based on gadolinium doped indium oxide nanofibers and their application in logic gate

One-dimensional metal oxide nanofibers have been regarded as promising building blocks for large area low cost electronic devices. As one of the representative metal oxide semiconducting materials, In2O3 based materials have attracted much interest due to their excellent electrical and optical properties. However, most of the field-effect transistors (FETs) based on In2O3 nanofibers usually operate in a depletion mode, which lead to large power consumption and a complicated integrated circuit design. In this report, gadolinium (Gd) doped In2O3 (InGdO) nanofibers were fabricated by electrospinning and applied as channels in the FETs. By optimizing the doping concentration and the nanofiber density, the device performance could be precisely manipulated. It was found that the FETs based on InGdO nanofibers, with a Gd doping concentration of 3% and a nanofiber density of 2.9 mu m(-1), exhibited the best device performance, including a field-effect mobility (mu(FE)) of 2.83 cm(2)/V s, an on/off current ratio of similar to 4 x 10(8), a threshold voltage (V-TH) of 5.8V, and a subthreshold swing (SS) of 2.4V/decade. By employing the high-k ZrOx thin films as the gate dielectrics in the FETs, the mu(FE), V-TH and SS can be further improved to be 17.4 cm(2)/V s, 0.7V and 160 mV/decade, respectively. Finally, an inverter based on the InGdO nanofibers/ZrOx FETs was constructed and a gain of similar to 11 was achieved. Published by AIP Publishing.