相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Microstructural evolution of a Ni-Fe-Cr-base superalloy during non-isothermal two-stage hot deformation
Y. C. Lin et al.
VACUUM (2018)
Work hardening characteristics and microstructural evolution during hot deformation of a nickel superalloy at moderate strain rates
S. S. Satheesh Kumar et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Kinetics equations and microstructural evolution during metadynamic recrystallization in a nickel-based superalloy with δ phase
Dao-Guang He et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Effect of hot deformation on γ and δ phase precipitation of Inconel 718 alloy during deformation&isothermal treatment
Hongjun Zhang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
EBSD study of grain growth behavior and annealing twin evolution after full recrystallization in a nickel-based superalloy
Xiao-Min Chen et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Effect of strain on evolution of dynamic recrystallization in Nb-1 wt%Zr-0.1 wt%C alloy at 1500 and 1600 °C
A. N. Behera et al.
MATERIALS CHARACTERIZATION (2017)
The role of δ phase for fatigue crack propagation behavior in a Ni base superalloy at room temperature
Jinlan An et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Influence of processing parameters on dynamic recrystallization and the associated annealing twin boundary evolution in a nickel base superalloy
S. K. Pradhan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Hot deformation characteristics of AZ80 magnesium alloy: Work hardening effect and processing parameter sensitivities
Y. Cai et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Microstructural evolution and constitutive models to predict hot deformation behaviors of a nickel-based superalloy
Y. C. Lin et al.
VACUUM (2017)
Evolution of grain refinement degree induced by dynamic recrystallization for Nimonic 80A during hot compression process and its FEM analysis
Guo-zheng Quan et al.
VACUUM (2017)
A new dynamic recrystallization kinetics model for a Nb containing Ni-Fe-Cr-base superalloy considering influences of initial δ phase
Dong-Xu Wen et al.
VACUUM (2017)
Design of a nickel-base superalloy using a neural network
B. D. Conduit et al.
MATERIALS & DESIGN (2017)
Effects of strain amount and strain rate on grain structure of a novel high Co nickel-based polycrystalline superalloy
Liming Tan et al.
MATERIALS & DESIGN (2017)
Processing Map Development through Elaborating Phenomenological and Physical Constitutive Based Models
Ehsan Farabi et al.
ADVANCED ENGINEERING MATERIALS (2016)
Approving Restoration Mechanism in 7075 Aluminum Alloy through Constitutive Flow Behavior Modeling
Mohammad Moghaddam et al.
ADVANCED ENGINEERING MATERIALS (2016)
A new method to predict the metadynamic recrystallization behavior in a typical nickel-based superalloy
Y. C. Lin et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2016)
Strain rate dependent microstructural evolution during hot deformation of a hot isostatically processed nickel base superalloy
S. S. Satheesh Kumar et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
The Kinetics of Metadynamic Recrystallization in a Ni-Cr-Mo-Based Superalloy Hastelloy C-276
Chi Zhang et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2016)
Difference in the Hot Compressive Behavior and Processing Maps between the As-cast and Homogenized Al-Zn-Mg-Cu (7075) Alloys
S. Y. Park et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2016)
Microstructural and constitutive analysis in process modeling of hot working: The case of a Mg-Zn-Mn alloy
S. Spigarelli et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Low cycle fatigue and creep-fatigue interaction behavior of nickel-base superalloy GH4169 at elevated temperature of 650°C
G. Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Stacking fault energy and deformation mechanisms in Fe-xMn-0.6C-yAl TWIP steel
Jin-Kyung Kim et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Evolution of twins and substructures during low strain rate hot deformation and contribution to dynamic recrystallization in alloy 617B
He Jiang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Characterization of hot deformation behavior of alloy 617 through kinetic analysis, dynamic material modeling and microstructural studies
K. Arun Babu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Dynamic softening mechanism in Ti-13V-11Cr-3Al beta Ti alloy during hot compressive deformation
S. M. Abbasi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Constitutive Model Based on Dynamic Recrystallization Behavior during Thermal Deformation of a Nickel-Based Superalloy
Peng Zhang et al.
METALS (2016)
The recrystallization model and microstructure prediction of alloy 690 during hot deformation
He Jiang et al.
MATERIALS & DESIGN (2016)
Microstructural evolution and constitutive equations of Inconel 718 alloy under quasi-static and quasi-dynamic conditions
M. Azarbarmas et al.
MATERIALS & DESIGN (2016)
EBSD analysis of evolution of dynamic recrystallization grains and δ phase in a nickel-based superalloy during hot compressive deformation
Y. C. Lin et al.
MATERIALS & DESIGN (2016)
Microstructural evolution of an aged Ni-based superalloy under two-stage hot compression with different strain rates
Kuo-Kuo Li et al.
MATERIALS & DESIGN (2016)
STUDY OF FLOW SOFTENING MECHANISMS OF A NICKEL-BASED SUPERALLOY WITH δ PHASE
Y. C. Lin et al.
ARCHIVES OF METALLURGY AND MATERIALS (2016)
Dynamic recrystallization behavior of a γ′-hardened nickel-based superalloy during hot deformation
Hongbin Zhang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Work-hardening behaviors of typical solution-treated and aged Ni-based superalloys during hot deformation
Dong-Xu Wen et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
EBSD study of a hot deformed nickel-based superalloy
Y. C. Lin et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Effect of δ Phase on Mechanical Properties of GH4169 Alloy at Room Temperature
Neng-yong Ye et al.
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2015)
Plastic deformation behavior and processing maps of a Ni-based superalloy
Peng Zhang et al.
MATERIALS & DESIGN (2015)
Effect of strain rate on microstructure evolution of a nickel-based superalloy during hot deformation
Hongbin Zhang et al.
MATERIALS & DESIGN (2015)
Flow characteristics and intrinsic workability of IN718 superalloy
Fei Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Effects of initial aging time on processing map and microstructures of a nickel-based superalloy
Dong-Xu Wen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Effect of chemical composition and processing variables on the hot flow behavior of leaded brass alloys
A. Momeni et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Prediction of hot deformation behavior in Ni-based alloy considering the effect of initial microstructure
Qiang Zuo et al.
PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2015)
Prediction of hot deformation behavior in Ni-based alloy considering the effect of initial microstructure
Qiang Zuo et al.
PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2015)
Dynamic Recrystallization of Wrought-Solidified-Wrought Complex Structure in Ni-Based Superalloys
Yongquan Ning et al.
ADVANCED ENGINEERING MATERIALS (2015)
A physically-based constitutive model for a typical nickel-based superalloy
Y. C. Lin et al.
COMPUTATIONAL MATERIALS SCIENCE (2014)
Workability characteristics and mechanical behavior modeling of severely deformed pure titanium at high temperatures
Seyed Vahid Sajadifar et al.
MATERIALS & DESIGN (2014)
Constitutive models for high-temperature flow behaviors of a Ni-based superalloy
Y. C. Lin et al.
MATERIALS & DESIGN (2014)
Dynamic recrystallization behavior and constitutive analysis of Incoloy 901 under hot working condition
A. Momeni et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Effects of initial δ phase on hot tensile deformation behaviors and fracture characteristics of a typical Ni-based superalloy
Y. C. Lin et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Deformation behavior of hot-rolled IN718 superalloy under plane strain compression at elevated temperature
Liang Cheng et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
A critical review of experimental results and constitutive descriptions for metals and alloys in hot working
Y. C. Lin et al.
MATERIALS & DESIGN (2011)
Hot deformation behavior of the post-cogging FGH4096 superalloy with fine equiaxed microstructure
Yongquan Ning et al.
MATERIALS CHARACTERIZATION (2011)
Optimization of hot working parameters for thermo-mechanical processing of modified 9Cr-1Mo (P91) steel employing dynamic materials model
Dipti Samantaray et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Dynamic recrystallization mechanisms operating in a Ni-20%Cr alloy under hot-to-warm working
N. Dudova et al.
ACTA MATERIALIA (2010)
Mechanisms of grain boundary engineering
V Randle et al.
ACTA MATERIALIA (2006)
Strain hardening of titanium: role of deformation twinning
AA Salem et al.
ACTA MATERIALIA (2003)
The effect of annealing twin-generated special grain boundaries on HAZ liquation cracking of nickel-base superalloys
M Qian et al.
ACTA MATERIALIA (2003)
The effect of grain-boundary-engineering-type processing on oxygen-induced cracking of IN718
U Krupp et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)