相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。How does the surface treatment change the cytocompatibility of implants made by selective laser melting?
Lucie Matouskova et al.
EXPERT REVIEW OF MEDICAL DEVICES (2018)
The barriers to the progression of additive manufacture: Perspectives from UK industry
L. E. J. Thomas-Seale et al.
INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS (2018)
Validation of a sterilization dose for products manufactured using a 3D printer
Wendy Wangsgard et al.
RADIATION PHYSICS AND CHEMISTRY (2018)
Titanium Oxide Modeling and Design for Innovative Biomedical Surfaces: A Concise Review
Luigi De Nardo et al.
INTERNATIONAL JOURNAL OF ARTIFICIAL ORGANS (2018)
Fully Porous 3D Printed Titanium Femoral Stem to Reduce Stress-Shielding Following Total Hip Arthroplasty
Sajad Arabnejad et al.
JOURNAL OF ORTHOPAEDIC RESEARCH (2017)
Evaluation of fatigue crack propagation behaviour in Ti-6Al-4V manufactured by selective laser melting
K. F. Walker et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Application of mechanical surface finishing processes for roughness reduction and fatigue improvement of additively manufactured Ti-6Al-4V parts
S. Bagehorn et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Fatigue life of additively manufactured Ti-6Al-4V in the very high cycle fatigue regime
J. Guenther et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Metallic powder-bed based 3D printing of cellular scaffolds for orthopaedic implants: A state-of-the-art review on manufacturing, topological design, mechanical properties and biocompatibility
X. P. Tan et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
Surface Finish has a Critical Influence on Biofilm Formation and Mammalian Cell Attachment to Additively Manufactured Prosthetics
Sophie C. Cox et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2017)
Surface Finish has a Critical Influence on Biofilm Formation and Mammalian Cell Attachment to Additively Manufactured Prosthetics
Sophie C. Cox et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2017)
Laser based additive manufacturing in industry and academia
Michael Schmidt et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2017)
Mechanical characterization of structurally porous biomaterials built via additive manufacturing: experiments, predictive models, and design maps for load-bearing bone replacement implants
D. Melancon et al.
ACTA BIOMATERIALIA (2017)
Three-dimensional printing: technologies, applications, and limitations in neurosurgery
Josephine U. Pucci et al.
BIOTECHNOLOGY ADVANCES (2017)
Laser and electron-beam powder-bed additive manufacturing of metallic implants: A review on processes, materials and designs
Swee Leong Sing et al.
JOURNAL OF ORTHOPAEDIC RESEARCH (2016)
Additive manufacturing of metals
Dirk Herzog et al.
ACTA MATERIALIA (2016)
Three-dimensional printing in orthopaedic surgery: review of current and future applications
Jonathan S. Mulford et al.
ANZ JOURNAL OF SURGERY (2016)
Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints
Mary Kathryn Thompson et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2016)
Effect of laser ablation parameters on surface improvement of electron beam melted parts
Ashfaq Mohammad et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Critical assessment of the fatigue performance of additively manufactured Ti-6Al-4V and perspective for future research
P. Li et al.
INTERNATIONAL JOURNAL OF FATIGUE (2016)
Fatigue crack growth behavior and microstructural mechanisms in Ti-6Al-4V manufactured by laser engineered net shaping
Yuwei Zhai et al.
INTERNATIONAL JOURNAL OF FATIGUE (2016)
Practical support structures for selective laser melting
M. X. Gan et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
Adding functionality with additive manufacturing: Fabrication of titanium-based antibiotic eluting implants
Sophie C. Cox et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
Surface chemistry of Ti6Al4V components fabricated using selective laser melting for biomedical applications
Jayasheelan Vaithilingam et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
Fatigue behavior and failure mechanisms of direct laser deposited Ti-6Al-4V
Amanda J. Sterling et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Microstructure and mechanical properties of Ti-6Al-4V: Mill-annealed versus direct metal laser melted alloys
R. P. Mulay et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Spatially dependent properties in a laser additive manufactured Ti-6Al-4V component
S. Palanivel et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Mechanical behavior of additive manufactured, powder-bed laser-fused materials
Todd M. Mower et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Effect of processing parameters of electron beam melting machine on properties of Ti-6Al-4V parts
Dana H. Abdeen et al.
RAPID PROTOTYPING JOURNAL (2016)
3D-printing and the effect on medical costs: a new era?
Yahya E. Choonara et al.
EXPERT REVIEW OF PHARMACOECONOMICS & OUTCOMES RESEARCH (2016)
A survey on mechanisms and critical parameters on solidification of selective laser melting during fabrication of Ti-6Al-4V prosthetic acetabular cup
Amir Mahyar Khorasani et al.
MATERIALS & DESIGN (2016)
Comparison of the microstructures and mechanical properties of Ti-6Al-4V fabricated by selective laser melting and electron beam melting
Xiaoli Zhao et al.
MATERIALS & DESIGN (2016)
Role of geometry on properties of additively manufactured Ti-6Al-4V structures fabricated using laser based directed energy deposition
Jayme S. Keist et al.
MATERIALS & DESIGN (2016)
A novel titanium alloy manufactured by selective laser melting: Microstructure, high temperature oxidation resistance
Y. Zhou et al.
MATERIALS & DESIGN (2016)
The use of adenosine triphosphate bioluminescence for assessing the cleanliness of additive-manufacturing materials used in medical applications
Ffion Lorraine O'Malley et al.
ADDITIVE MANUFACTURING (2016)
Osseointegration of three-dimensional designed titanium implants manufactured by selective laser melting
Algabri Shaoki et al.
BIOFABRICATION (2016)
Development of Ti-Nb-Zr alloys with high elastic admissible strain for temporary orthopedic devices
Sertan Ozan et al.
ACTA BIOMATERIALIA (2015)
A synergistic effect of albumin and H2O2 accelerates corrosion of Ti6Al4V
Fei Yu et al.
ACTA BIOMATERIALIA (2015)
Bone response to a novel Ti-Ta-Nb-Zr alloy
Patrik Stenlund et al.
ACTA BIOMATERIALIA (2015)
Graded microstructure and mechanical properties of additive manufactured Ti-6Al-4V via electron beam melting
Xipeng Tan et al.
ACTA MATERIALIA (2015)
Additive manufacturing of strong and ductile Ti-6Al-4V by selective laser melting via in situ martensite decomposition
W. Xu et al.
ACTA MATERIALIA (2015)
Biomimetic approaches in bone tissue engineering: Integrating biological and physicomechanical strategies
Marc A. Fernandez-Yague et al.
ADVANCED DRUG DELIVERY REVIEWS (2015)
Electron Beam Melting Fabrication of Porous Ti6Al4V Scaffolds: Cytocompatibility and Osteogenesis
Jia Lv et al.
ADVANCED ENGINEERING MATERIALS (2015)
Regulatory Considerations in the Design and Manufacturing of Implantable 3D-Printed Medical Devices
Robert J. Morrison et al.
CTS-CLINICAL AND TRANSLATIONAL SCIENCE (2015)
Studies on design of customized orthopedic endoprostheses of titanium alloy manufactured by SLM
Dan Leordean et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Manipulation and Characterization of a Novel Titanium Powder Precursor for Additive Manufacturing Applications
Y. Y. Sun et al.
JOM (2015)
Compact Process for the Preparation of Microfine Spherical High-Niobium-Containing TiAl Alloy Powders
J. B. Tong et al.
JOM (2015)
Effect of Powder Reuse Times on Additive Manufacturing of Ti-6Al-4V by Selective Electron Beam Melting
H. P. Tang et al.
JOM (2015)
Evaluation of Orientation Dependence of Fracture Toughness and Fatigue Crack Propagation Behavior of As-Deposited ARCAM EBM Ti-6Al-4V
Mohsen Seifi et al.
JOM (2015)
Microstructure, mechanical properties and electrochemical behavior of a novel biomedical titanium alloy subjected to thermo-mechanical processing including aging
Mohsin Talib Mohammed et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Fabrication of large Ti-6Al-4V structures by direct laser deposition
Chunlei Qiu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Effects of scanning parameters on material deposition during Electron Beam Selective Melting of Ti-6Al-4V powder
Chao Guo et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
Direct Laser Forming of Titanium Alloy Powders for Medical and Aerospace Applications
Hideshi Miura
KONA Powder and Particle Journal (2015)
Porous niobium coatings fabricated with selective laser melting on titanium substrates: Preparation, characterization, and cell behavior
Sheng Zhang et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2015)
The physicochemical/biological properties of porous tantalum and the potential surface modification techniques to improve its clinical application in dental implantology
Yindong Liu et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2015)
3D printing of porous hydroxyapatite scaffolds intended for use in bone tissue engineering applications
Sophie C. Cox et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2015)
Cellular Responses Evoked by Different Surface Characteristics of Intraosseous Titanium Implants
Liviu Feller et al.
BIOMED RESEARCH INTERNATIONAL (2015)
Surface oxidation behavior of Ti-6Al-4V manufactured by Electron Beam Melting (EBM (R))
Joakim Karlsson et al.
JOURNAL OF MANUFACTURING PROCESSES (2015)
Metallurgy of additive manufacturing: Examples from electron beam melting
L. E. Murr
ADDITIVE MANUFACTURING (2015)
The Influence of Processing Parameters on the Mechanical Properties of SLM Parts
Pavel Hanzl et al.
25TH DAAAM INTERNATIONAL SYMPOSIUM ON INTELLIGENT MANUFACTURING AND AUTOMATION, 2014 (2015)
Fatigue Behaviour of Additively Manufactured Ti-6Al-4V
Amanda Sterling et al.
FATIGUE DESIGN 2015, INTERNATIONAL CONFERENCE PROCEEDINGS, 6TH EDITION (2015)
An overview of Direct Laser Deposition for additive manufacturing; Part I: Transport phenomena, modeling and diagnostics
Scott M. Thompson et al.
ADDITIVE MANUFACTURING (2015)
An overview overview of Direct Laser Deposition for additive manufacturing; Part II: Mechanical behavior, process parameter optimization and control
Nima Shamsaei et al.
ADDITIVE MANUFACTURING (2015)
Temperature distribution and melt geometry in laser and electron-beam melting processes - A comparison among common materials
John Romano et al.
ADDITIVE MANUFACTURING (2015)
Evaluations of effective thermal conductivity of support structures in selective laser melting
Kai Zeng et al.
ADDITIVE MANUFACTURING (2015)
Design Control for Clinical Translation of 3D Printed Modular Scaffolds
Scott J. Hollister et al.
ANNALS OF BIOMEDICAL ENGINEERING (2015)
Crack propagation and fracture toughness of Ti6A14V alloy produced by selective laser melting
V Cain et al.
ADDITIVE MANUFACTURING (2015)
Microstructure and mechanical properties of a novel β titanium metallic composite by selective laser melting
B. Vrancken et al.
ACTA MATERIALIA (2014)
Bioactive Coatings for Orthopaedic Implants-Recent Trends in Development of Implant Coatings
Bill G. X. Zhang et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2014)
Microstructural and mechanical properties, surface and electrochemical characterisation of a new Ti-Zr-Nb alloy for implant applications
Jose Maria Calderon-Moreno et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Selective laser melting of Ti6Al4V alloy for biomedical applications: Temperature monitoring and microstructural evolution
I. Yadroitsev et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Modeling of time dependent localized flow shear stress and its impact on cellular growth within additive manufactured titanium implants
Ziyu Zhang et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2014)
Additive manufactured porous titanium structures: Through-process quantification of pore and strut networks
Taek Bo Kim et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)
The formation of α plus β microstructure in as-fabricated selective laser melting of Ti-6Al-4V
Marlo Simonelli et al.
JOURNAL OF MATERIALS RESEARCH (2014)
Physical and mechanical characterisation of 3D-printed porous titanium for biomedical applications
Aouni El-Hajje et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2014)
beta-Type Zr-Nb-Ti biomedical materials with high plasticity and low modulus for hard tissue replacements
Li Nie et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2014)
Design optimization of supports for overhanging structures in aluminum and titanium alloys by selective laser melting
F. Calignano
MATERIALS & DESIGN (2014)
Fatigue performance evaluation of selective laser melted Ti-6Al-4V
P. Edwards et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Effect of the build orientation on the mechanical properties and fracture modes of SLM Ti-6A1-4V
M. Simonelli et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Selective laser melting of Ti6Al7Nb with hydroxyapatite addition
Teodora Marcu et al.
RAPID PROTOTYPING JOURNAL (2014)
A β-type TiNbZr alloy with low modulus and high strength for biomedical applications
Qingkun Meng et al.
PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2014)
Biocompatibility of Advanced Manufactured Titanium Implants-A Review
Alfred T. Sidambe
MATERIALS (2014)
How might 3D printing affect clinical practice?
Mahiben Maruthappu et al.
BMJ-BRITISH MEDICAL JOURNAL (2014)
Three dimensional printing of titanium for bone tissue engineering applications: A preliminary study
Vipra Guneta et al.
JOURNAL OF BIOMIMETICS BIOMATERIALS AND BIOMEDICAL ENGINEERING (2014)
The prediction of photovoltaic module temperature with artificial neural networks
Ilhan Ceylan et al.
CASE STUDIES IN THERMAL ENGINEERING (2014)
An investigation of the effect of direct metal deposition parameters on the characteristics of the deposited layers
Tarak Amine et al.
CASE STUDIES IN THERMAL ENGINEERING (2014)
New depowdering-friendly designs for three-dimensional printing of calcium phosphate bone substitutes
A. Butscher et al.
ACTA BIOMATERIALIA (2013)
How smart do biomaterials need to be? A translational science and clinical point of view
Boris Michael Holzapfel et al.
ADVANCED DRUG DELIVERY REVIEWS (2013)
Surface characterization of oxides grown on the Ti-13Nb-13Zr alloy and their corrosion protection
Lais T. Duarte et al.
CORROSION SCIENCE (2013)
A new approach to the design and optimisation of support structures in additive manufacturing
G. Strano et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: Fatigue resistance and crack growth performance
S. Lenders et al.
INTERNATIONAL JOURNAL OF FATIGUE (2013)
Combinatorial synthesis of alloy libraries with a progressive composition gradient using laser engineered net shaping (LENS): Hydrogen storage alloys
M. Polanski et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2013)
Mechanical properties of porous metastable beta Ti-Nb-Zr alloys for biomedical applications
V. Brailovski et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2013)
Long-term biocompatibility and osseointegration of electron beam melted, free-form-fabricated solid and porous titanium alloy: Experimental studies in sheep
A. Palmquist et al.
JOURNAL OF BIOMATERIALS APPLICATIONS (2013)
Influence of various process conditions on surface finishes induced by the direct metal deposition laser technique on a Ti-6Al-4V alloy
Myriam Gharbi et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2013)
Characterization and comparison of materials produced by Electron Beam Melting (EBM) of two different Ti-6Al-4V powder fractions
Joakim Karlsson et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2013)
Advanced lattice support structures for metal additive manufacturing
Ahmed Hussein et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2013)
Micromotion and friction evaluation of a novel surface architecture for improved primary fixation of cementless orthopaedic implants
N. Harrison et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2013)
Microstructure and mechanical behavior of porous Ti-6Al-4V parts obtained by selective laser melting
E. Sallica-Leva et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2013)
Effect of build geometry on the β-grain structure and texture in additive manufacture of Ti-6Al-4V by selective electron beam melting
A. A. Antonysamy et al.
MATERIALS CHARACTERIZATION (2013)
Effects of processing on microstructure and mechanical properties of a titanium alloy (Ti-6Al-4V) fabricated using electron beam melting (EBM), Part 2: Energy input, orientation, and location
Nikolas Hrabe et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Microstructure and tensile properties of selectively laser-melted and of HIPed laser-melted Ti-6Al-4V
Chunlei Qiu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Fabrication of Metal and Alloy Components by Additive Manufacturing: Examples of 3D Materials Science
Lawrence E. Murr et al.
Journal of Materials Research and Technology-JMR&T (2013)
The effect of pore geometry on the mechanical properties of selective laser melted Ti-13Nb-13Zr scaffolds
M. Speirs et al.
FIRST CIRP CONFERENCE ON BIOMANUFACTURING (2013)
The effect of pore geometry on the in vitro biological behavior of human periosteum-derived cells seeded on selective laser-melted Ti6Al4V bone scaffolds
S. Van Bael et al.
ACTA BIOMATERIALIA (2012)
Development of new metallic alloys for biomedical applications
Mitsuo Niinomi et al.
ACTA BIOMATERIALIA (2012)
Heat treatment of Ti6Al4V produced by Selective Laser Melting: Microstructure and mechanical properties
Bey Vrancken et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2012)
Characterizations of additive manufactured porous titanium implants
Ahmad Basalah et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2012)
Effects of processing parameters on microstructure and mechanical property of selective laser melted Ti6Al4V
Bo Song et al.
MATERIALS & DESIGN (2012)
Microstructure of additive layer manufactured Ti-6Al-4V after exceptional post heat treatments
Erhard Brandl et al.
MATERIALS LETTERS (2012)
Microstructure, corrosion behavior and cytotoxicity of Zr-Nb alloys for biomedical application
F. Y. Zhou et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2012)
Strontium signaling: Molecular mechanisms and therapeutic implications in osteoporosis
Zuzana Saidak et al.
PHARMACOLOGY & THERAPEUTICS (2012)
Metallurgical and mechanical characterisation of titanium based materials for endosseous applications obtained by selective laser melting
T. Marcu et al.
POWDER METALLURGY (2012)
Development of porous medical implant scaffolds via laser additive manufacturing
Su Xu-bin et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2012)
Bioactive Ti metal analogous to human cancellous bone: Fabrication by selective laser melting and chemical treatments
Deepak K. Pattanayak et al.
ACTA BIOMATERIALIA (2011)
Structural and material approaches to bone tissue engineering in powder-based three-dimensional printing
A. Butscher et al.
ACTA BIOMATERIALIA (2011)
Strontium doping of bone graft extender Effect on fixation of allografted experimental implants
Marianne T. Vestermark et al.
ACTA ORTHOPAEDICA (2011)
Biomineralized strontium-substituted apatite/titanium dioxide coating on titanium surfaces
Wei Xia et al.
ACTA BIOMATERIALIA (2010)
Direct laser processing of a tantalum coating on titanium for bone replacement structures
Vamsi Krishna Balla et al.
ACTA BIOMATERIALIA (2010)
Influence of porosity on mechanical properties and in vivo response of Ti6Al4V implants
Amit Bandyopadhyay et al.
ACTA BIOMATERIALIA (2010)
The effect of strontium-substituted hydroxyapatite coating on implant fixation in ovariectomized rats
Yunfeng Li et al.
BIOMATERIALS (2010)
Enhanced osteoblast response to hydrophilic strontium and/or phosphate ions-incorporated titanium oxide surfaces
Jin-Woo Park et al.
CLINICAL ORAL IMPLANTS RESEARCH (2010)
Effect of roughness, wettability and morphology of engineered titanium surfaces on osteoblast-like cell adhesion
J. I. Rosales-Leal et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2010)
In vivo performance of selective electron beam-melted Ti-6Al-4V structures
Sabine Ponader et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2010)
Early Human Bone Response to Laser Metal Sintering Surface Topography: A Histologic Report
Carlo Mangano et al.
JOURNAL OF ORAL IMPLANTOLOGY (2010)
Additive manufacturing of Ti-6Al-4V components by shaped metal deposition: Microstructure and mechanical properties
Bernd Baufeld et al.
MATERIALS & DESIGN (2010)
In vitro biocompatibility of titanium alloy discs made using direct metal fabrication
Carla Maria Haslauer et al.
MEDICAL ENGINEERING & PHYSICS (2010)
Next-generation biomedical implants using additive manufacturing of complex, cellular and functional mesh arrays
L. E. Murr et al.
PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2010)
Fabrication of compositionally and structurally graded Ti-TiO2 structures using laser engineered net shaping (LENS)
Vamsi Krishna Balla et al.
ACTA BIOMATERIALIA (2009)
Microstructure and mechanical behavior of Ti-6Al-4V produced by rapid-layer manufacturing, for biomedical applications
L. E. Murr et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2009)
The structure of strontium-doped hydroxyapatite: an experimental and theoretical study
Joice Terra et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2009)
Ti based biomaterials, the ultimate choice for orthopaedic implants - A review
M. Geetha et al.
PROGRESS IN MATERIALS SCIENCE (2009)
Rapid Prototyping: Porous Titanium Alloy Scaffolds Produced by Selective Laser Melting for Bone Tissue Engineering
Patrick H. Warnke et al.
TISSUE ENGINEERING PART C-METHODS (2009)
Selective Electron Beam Melting of Cellular Titanium: Mechanical Properties
Peter Heinl et al.
ADVANCED ENGINEERING MATERIALS (2008)
Effect of surface micro-topography of titanium material on the behaviors of rabbit osteoblast in vitro
Jun Fu et al.
APPLIED SURFACE SCIENCE (2008)
Porous titanium scaffolds fabricated using a rapid prototyping and powder metallurgy technique
Garrett E. Ryan et al.
BIOMATERIALS (2008)
The morphology of anisotropic 3D-printed hydroxyapatite scaffolds
Fabienne C. Fierz et al.
BIOMATERIALS (2008)
The design and production of Ti-6Al-4V ELI customized dental implants
Gilbert Chahine et al.
JOM (2008)
Effects of topographical surface modifications of electron beam melted Ti-6Al-4V titanium on human fetal osteoblasts
Sabine Ponader et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2008)
Interface interactions between porous titanium/tantalum coatings, produced by Selective Laser Melting (SLM), on a cobalt-chromium alloy
P. Fox et al.
SURFACE & COATINGS TECHNOLOGY (2008)
Processing and biocompatibility evaluation of laser processed porous titanium
Weichang Xue et al.
ACTA BIOMATERIALIA (2007)
A novel combinatorial approach for understanding microstructural evolution and its relationship to mechanical properties in metallic biomaterials
S. Nag et al.
ACTA BIOMATERIALIA (2007)
Research on the processing experiments of laser metal deposition shaping
Kai Zhang et al.
OPTICS AND LASER TECHNOLOGY (2007)
Systematic study of osteoblast and fibroblast response to roughness by means of surface-morphology gradients
Tobias P. Kunzler et al.
BIOMATERIALS (2007)
Selective laser melting of biocompatible metals for rapid manufacturing of medical parts
Ben Vandenbroucke et al.
RAPID PROTOTYPING JOURNAL (2007)
Structural, mechanical and in vitro characterization of individually structured Ti-6Al-4V produced by direct laser forming
DA Hollander et al.
BIOMATERIALS (2006)
Rapid manufacturing of metal components by laser forming
Edson Costa Santos et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2006)
Microstructural and mechanical characterization of biomedical Ti-Nb-Zr(-Ta) alloys
L. M. Elias et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Experimental and clinical performance of porous tantalum in orthopedic surgery
Brett Russell Levine et al.
BIOMATERIALS (2006)
Fabrication methods of porous metals for use in orthopaedic applications
G Ryan et al.
BIOMATERIALS (2006)
A novel combinatorial approach to the development of beta titanium alloys for orthopaedic implants
R Banerjee et al.
MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS (2005)
The proliferation and phenotypic expression of human osteoblasts on tantalum metal
DM Findlay et al.
BIOMATERIALS (2004)
Microstructures of laser-deposited Ti-6Al-4V
XH Wu et al.
MATERIALS & DESIGN (2004)
Biocompatibility of β-stabilizing elements of titanium alloys
E Eisenbarth et al.
BIOMATERIALS (2004)
Microstructural evolution in laser deposited compositionally graded α/β titanium-vanadium alloys
R Banerjee et al.
ACTA MATERIALIA (2003)
Relationship between surface properties (roughness, wettability) of titanium and titanium alloys and cell behaviour
L Ponsonnet et al.
MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS (2003)
Microstructure and texture evolution during solidification processing of Ti-6Al-4V
PA Kobryn et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)
Biological fixation of hydroxyapatite-coated versus grit-blasted titanium hip stems: a canine study
A Eckardt et al.
ARCHIVES OF ORTHOPAEDIC AND TRAUMA SURGERY (2003)
In vitro MC3T3 osteoblast adhesion with respect to surface roughness of Ti6A14V substrates
P Linez-Bataillon et al.
BIOMOLECULAR ENGINEERING (2002)
Improvement in the morphology of Ti-based surfaces:: a new process to increase in vitro human osteoblast response
M Bigerelle et al.
BIOMATERIALS (2002)
Biocompatibility and osteogenesis of refractory metal implants, titanium, hafnium, niobium, tantalum and rhenium
H Matsuno et al.
BIOMATERIALS (2001)
Effect of surface roughness of the titanium alloy Ti-6Al-4V on human bone marrow cell response and on protein adsorption
DD Deligianni et al.
BIOMATERIALS (2001)