相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Evaluation of maximum and minimum corrosion rate of steel rebars in concrete structures, based on laboratory measurements on drilled cores
Mariusz Jasniok et al.
INTERNATIONAL CONFERENCE ON ANALYTICAL MODELS AND NEW CONCEPTS IN CONCRETE AND MASONRY STRUCTURES (2017)
Mechanism and sensitivity of Fe-C coated long period fiber grating sensors for steel corrosion monitoring of RC structures
Yizheng Chen et al.
CORROSION SCIENCE (2017)
Stray current induced corrosion of steel fibre reinforced concrete
Kangkang Tang
CEMENT AND CONCRETE RESEARCH (2017)
Electrochemical corrosion monitoring of steel fiber embedded in cement based composites
Ahsanollah Beglarigale et al.
CEMENT & CONCRETE COMPOSITES (2017)
Assessment of the influence of Concrete Modification in the Water Uptake/Evaporation Kinetics by Electrochemical Impedance Spectroscopy
C. Vicente et al.
ELECTROCHIMICA ACTA (2017)
Corrosion behavior of steel reinforcement bars embedded in concrete exposed to chlorides: Effect of surface finish
J. O. Rivera-Corral et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Experimental characterisation of concrete containing different kinds of dielectric inclusions through measurements of dielectric constant and electrical resistivity
Mohamed Abdelhafid Bouhamla et al.
GREEN URBANISM (GU) (2017)
Proposing new methods to appraise segregation resistance of self-consolidating concrete based on electrical resistivity
Mahmoud Nili et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Chloride threshold value to initiate reinforcement corrosion in simulated concrete pore solutions: The influence of surface finishing and pH
Rita B. Figueira et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Evaluation of alkali reactivity of concrete aggregates via AC impedance spectroscopy
Tao Shi et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Monitoring chloride ion penetration in concrete with different mineral admixtures based on embedded chloride ion selective electrodes
Ming Jin et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Probabilistic evaluation method for corrosion risk of steel reinforcement based on concrete resistivity
Bo Yu et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Experimental and probabilistic analysis of time to corrosion-induced cover cracking for marine reinforced concrete structures
Chunhua Lu et al.
CORROSION ENGINEERING SCIENCE AND TECHNOLOGY (2017)
Probabilistic durability assessment of concrete structures in marine environments: Reliability and sensitivity analysis
Bo Yu et al.
CHINA OCEAN ENGINEERING (2017)
Potentiometric thick-film sensors for measuring the pH of concrete
J. M. Gandia-Romero et al.
CEMENT & CONCRETE COMPOSITES (2016)
Predictive convection zone depth of chloride in concrete under chloride environment
Peng Liu et al.
CEMENT & CONCRETE COMPOSITES (2016)
Development of solid state embeddable reference electrode for corrosion monitoring of steel in reinforced concrete structures
V. Maruthapandian et al.
CEMENT & CONCRETE COMPOSITES (2016)
The experimental study on the correlation of resistivity and damage for conductive concrete
Hong-yan Chu et al.
CEMENT & CONCRETE COMPOSITES (2016)
Temperature response and moisture transport in damaged concrete under an atmospheric environment
Weiping Zhang et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
The effect of carbonate and sulfate ions on chloride threshold level of reinforcement corrosion in mortar with/without fly ash
Rong Liu et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Nondestructive test methods for concrete bridges: A review
Sardar Kashif Ur Rehman et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Probabilistic analysis of reinforcement corrosion due to the combined action of carbonation and chloride ingress in concrete
Xingji Zhu et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Methods for measuring pH in concrete: A review
Ali Behnood et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Influence of mortar resistivity on the rate-limiting step of chloride-induced macro-cell corrosion of reinforcing steel
Karla Hornbostel et al.
CORROSION SCIENCE (2016)
Effect of carbonation on release of bound chlorides in chloride-contaminated concrete
Jian Geng et al.
MAGAZINE OF CONCRETE RESEARCH (2016)
Diagnosis of carbonation induced corrosion initiation and progression in reinforced concrete structures using piezo-impedance transducers
V. Talakokula et al.
SENSORS AND ACTUATORS A-PHYSICAL (2016)
Characterization of embeddable potentiometric thick-film sensors for monitoring chloride penetration in concrete
Jose M. Gandia-Romero et al.
SENSORS AND ACTUATORS B-CHEMICAL (2016)
Lifetime modelling of chloride-induced corrosion in concrete structures with Portland and blended cements
Pedro Faustino et al.
STRUCTURE AND INFRASTRUCTURE ENGINEERING (2016)
Acoustic emission monitoring and damage mode discrimination of APS thermal barrier coatings under high temperature CMAS corrosion
L. Yang et al.
SURFACE & COATINGS TECHNOLOGY (2016)
Probabilistic Corrosion Initiation Time Assessment of Existing Concrete Structures Under Marine Environment
Lingjie Wu et al.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2015)
A quantitative analysis of the geometric effects of reinforcement in concrete resistivity measurement above reinforcement
Young-Chul Lim et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Reinforced concrete structure: Non destructive in situ strength assessment of concrete
Raffaele Pucinotti
CONSTRUCTION AND BUILDING MATERIALS (2015)
Temperature and loading effects of embedded smart piezoelectric sensor for health monitoring of concrete structures
Xu Dongyu et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
On the measurement of the polarisation resistance of reinforcing steel with embedded sensors: A comparative study
E. V. Pereira et al.
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2015)
Influence of flexural fatigue on chloride threshold value for the corrosion of steels in Ca(OH)2 solutions
Linhua Jiang et al.
MATERIALS CHEMISTRY AND PHYSICS (2015)
Non-Destructive Evaluation for Corrosion Monitoring in Concrete: A Review and Capability of Acoustic Emission Technique
Ahmad Zaki et al.
SENSORS (2015)
Studies on the effect of a limited polarization range of reinforcement on impedance spectra shapes of steel in concrete
Mariusz Jasniok
7TH SCIENTIFIC-TECHNICAL CONFERENCE ON MATERIAL PROBLEMS IN CIVIL ENGINEERING (MATBUD'2015) (2015)
Connecting to Concrete: Wireless Monitoring of Chloride ions in Concrete structures
Yawar Abbas et al.
EUROSENSORS 2015 (2015)
Influence of rapid changes of moisture content in concrete and temperature on corrosion rate of reinforcing steel
Tomasz Jasniok et al.
7TH SCIENTIFIC-TECHNICAL CONFERENCE ON MATERIAL PROBLEMS IN CIVIL ENGINEERING (MATBUD'2015) (2015)
Accelerated carbonation tests for the probabilistic prediction of the durability of concrete structures
Frederic Duprat et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Practical model for predicting corrosion rate of steel reinforcement in concrete structures
Bo Yu et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Analysis of chloride threshold from laboratory and field experiments in marine atmosphere zone
G. R. Meira et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Electrochemical impedance study on steel corrosion in the simulated concrete system with a novel self-healing microcapsule
Biqin Dong et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Influence of compression fatigue on chloride threshold value for the corrosion of steels in simulated concrete pore
Linhua Jiang et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Corrosion Behavior of Stainless Steel Rebars Embedded in Concrete: an Electrochemical Impedance Spectroscopy Study
R. G. Duarte et al.
ELECTROCHIMICA ACTA (2014)
Influence of Unsupported Concrete Media in Corrosion Assessment for Steel Reinforcing Concrete by Electrochemical Impedance Spectroscopy
A. S. Castela et al.
ELECTROCHIMICA ACTA (2014)
The electrochemical behaviour of steel rebars in concrete: an Electrochemical Impedance Spectroscopy study of the effect of temperature
J. M. Deus et al.
ELECTROCHIMICA ACTA (2014)
Corrosion in Reinforced Concrete Panels: Wireless Monitoring and Wavelet-Based Analysis
Guofu Qiao et al.
SENSORS (2014)
Long-term relative performance of embedded sensor and surface mounted electrode for corrosion monitoring of steel in concrete structures
S. P. Karthick et al.
SENSORS AND ACTUATORS B-CHEMICAL (2014)
Fluorescence based fibre optic pH sensor for the pH 10-13 range suitable for corrosion monitoring in concrete structures
T. Hien Nguyen et al.
SENSORS AND ACTUATORS B-CHEMICAL (2014)
Monitoring Corrosion of Steel Bars in Reinforced Concrete Structures
Sanjeev Kumar Verma et al.
SCIENTIFIC WORLD JOURNAL (2014)
A Simple and Reliable Setup for Monitoring Corrosion Rate of Steel Rebars in Concrete
Shamsad Ahmad et al.
SCIENTIFIC WORLD JOURNAL (2014)
Relationship between concrete resistivity and corrosion rate - A literature review
Karla Hornbostel et al.
CEMENT & CONCRETE COMPOSITES (2013)
Monitoring of the degradation of concrete structures in environments containing chloride ions
Pedro Romano et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
Wireless sensor networks for temperature and humidity monitoring within concrete structures
Norberto Barroca et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
Effect of curing regime on concrete resistivity and aging factor over time
F. Presuel-Moreno et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
Probabilistic analysis of the time to chloride induced corrosion for different Self-Compacting Concretes
Paraic C. Ryan et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
Modelling of interaction between corrosion-induced concrete cover crack and steel corrosion rate
Chong Cao et al.
CORROSION SCIENCE (2013)
Probabilistic models applied to safety assessment of reinforced concrete structures subjected to chloride ingress
Caio Gorla Nogueira et al.
ENGINEERING FAILURE ANALYSIS (2013)
A probabilistic threshold for the onset of carbonation-induced corrosion
Frederic Duprat et al.
EUROPEAN JOURNAL OF ENVIRONMENTAL AND CIVIL ENGINEERING (2013)
Electrochemical Performance Evaluation of Corrosion Monitoring Sensor for Reinforced Concrete Structures
Jin-A Jeong et al.
JOURNAL OF ADVANCED CONCRETE TECHNOLOGY (2013)
EIS analysis on chloride-induced corrosion behavior of reinforcement steel in simulated carbonated concrete pore solutions
Chen-Qing Ye et al.
JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2013)
Numerically and Experimentally Based Reliability Assessment of a Concrete Bridge Subjected to Chloride-Induced Deterioration
Alfred Strauss et al.
JOURNAL OF INFRASTRUCTURE SYSTEMS (2013)
Condition survey with embedded sensors regarding reinforcement corrosion
M. Raupach et al.
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2013)
A simple analytical design approach based on computer aided analysis of bulk micromachined piezoresistive MEMS accelerometer for concrete SHM applications
S. Kavitha et al.
MEASUREMENT (2013)
Optical fibre-based sensor technology for humidity and moisture measurement: Review of recent progress
L. Alwis et al.
MEASUREMENT (2013)
A New Corrosion Sensor to Determine the Start and Development of Embedded Rebar Corrosion Process at Coastal Concrete
Chen Xu et al.
SENSORS (2013)
A wireless embedded passive sensor for monitoring the corrosion potential of reinforcing steel
Sharmistha Bhadra et al.
SMART MATERIALS AND STRUCTURES (2013)
Methodology for Assessing the Probability of Corrosion in Concrete Structures on the Basis of Half-Cell Potential and Concrete Resistivity Measurements
Lukasz Sadowski
SCIENTIFIC WORLD JOURNAL (2013)
Probabilistic modeling of chloride-induced corrosion in concrete structures using first- and second-order reliability methods
Bassem Saassouh et al.
CEMENT & CONCRETE COMPOSITES (2012)
Corrosion behavior of steel in simulated concrete pore solutions treated with calcium silicate hydrates
Y. M. Tang et al.
CONSTRUCTION AND BUILDING MATERIALS (2012)
Initial corrosion presented by chloride threshold penetration of concrete up to 10 year-results under marine site
T. Cheewaket et al.
CONSTRUCTION AND BUILDING MATERIALS (2012)
Influence of chloride salt type on threshold level of reinforcement corrosion in simulated concrete pore solutions
Linhua Jiang et al.
CONSTRUCTION AND BUILDING MATERIALS (2012)
On-site transient analysis for the corrosion assessment of reinforced concrete
C. Christodoulou et al.
CORROSION SCIENCE (2012)
Influence of humidity and temperature on the corrosion of reinforced concrete prisms
Veronique Bouteiller et al.
EUROPEAN JOURNAL OF ENVIRONMENTAL AND CIVIL ENGINEERING (2012)
Characterization of the reinforcing steel corrosion by potentialdynamic scan approach
Qiao Guofu et al.
JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION (2012)
An embedded multi-parameter corrosion sensor for reinforced concrete structures
H. Yu et al.
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2012)
Reliability of Electrochemical Techniques to Predict the Corrosion Rate of Steel in Concrete Structures
R. Vedalakshmi et al.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2011)
Durability Monitoring for Improved Service Life Predictions of Concrete Bridge Decks in Corrosive Environments
D. Cusson et al.
COMPUTER-AIDED CIVIL AND INFRASTRUCTURE ENGINEERING (2011)
Influence of CaCl2 and NaCl from different sources on chloride threshold value for the corrosion of steel reinforcement in concrete
Jinxia Xu et al.
CONSTRUCTION AND BUILDING MATERIALS (2011)
Chloride induced reinforcement corrosion: Electrochemical monitoring of initiation stage and chloride threshold values
Ueli M. Angst et al.
CORROSION SCIENCE (2011)
The electrochemical behaviour of stainless steel AISI 304 in alkaline solutions with different pH in the presence of chlorides
L. Freire et al.
ELECTROCHIMICA ACTA (2011)
Effective monitoring of corrosion in reinforcing steel in concrete constructions by a multifunctional sensor
Shi-Gang Dong et al.
ELECTROCHIMICA ACTA (2011)
A comprehensive probabilistic model of chloride ingress in unsaturated concrete
E. Bastidas-Arteaga et al.
ENGINEERING STRUCTURES (2011)
Polarization resistance measurements of bars embedded in concrete with different chloride concentrations: EIS and DC comparison
I. Martinez et al.
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2011)
Remote corrosion monitoring of the RC structures using the electrochemical wireless energy-harvesting sensors and networks
Guofu Qiao et al.
NDT & E INTERNATIONAL (2011)
Monitoring of corrosion in reinforced concrete structure using Bragg grating sensing
Junqi Gao et al.
NDT & E INTERNATIONAL (2011)
Non-Destructive Techniques Based on Eddy Current Testing
Javier Garcia-Martin et al.
SENSORS (2011)
Potentiostatic transient technique, a simple approach to estimate the corrosion current density and Stern-Geary constant of reinforcing steel in concrete
A. Poursaee
CEMENT AND CONCRETE RESEARCH (2010)
Non-substrate EIS monitoring of organic coatings with embedded electrodes
Kerry Allahar et al.
PROGRESS IN ORGANIC COATINGS (2010)
Examples of reinforcement corrosion monitoring by embedded sensors in concrete structures
I. Martinez et al.
CEMENT & CONCRETE COMPOSITES (2009)
Development of an embeddable sensor to monitor the corrosion process of new and existing reinforced concrete structures
Gustavo S. Duffo et al.
CONSTRUCTION AND BUILDING MATERIALS (2009)
Electrochemical frequency modulation and inductively coupled plasma atomic emission spectroscopy methods for monitoring corrosion rates and inhibition of low alloy steel corrosion in HCl solutions and a test for validity of the Tafel extrapolation method
Mohammed A. Amin et al.
CORROSION SCIENCE (2009)
Characterization of solid embeddable reference electrodes for corrosion monitoring in reinforced concrete structures
G. S. Duffo et al.
ELECTROCHIMICA ACTA (2009)
Corrosion cracking prediction updating of deteriorating RC structures using inspection information
Qinghui Suo et al.
RELIABILITY ENGINEERING & SYSTEM SAFETY (2009)
A Galvanic Sensor for Monitoring the Corrosion Condition of the Concrete Reinforcing Steel: Relationship Between the Galvanic and the Corrosion Currents
Elsa Vaz Pereira et al.
SENSORS (2009)
Optical fibre sensors for the measurement of concrete sample properties following exposure to freeze/thaw tests
T. L. Yeo et al.
SENSORS AND ACTUATORS A-PHYSICAL (2009)
Electrical property of cement-based composites filled with carbon black under long-term wet and loading condition
Hui Li et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2008)
Temperature and moisture monitoring in concrete structures using embedded nanotechnology/microelectromechanical systems (MEMS) sensors
Ashley Norris et al.
CONSTRUCTION AND BUILDING MATERIALS (2008)
Influence of environmental parameters on application of standard ASTM C876-91: half cell potential measurements
B. Assouli et al.
CORROSION ENGINEERING SCIENCE AND TECHNOLOGY (2008)
Galvanostatic pulse technique with the current confinement guard ring: The laboratory and finite element analysis
A. Poursaee et al.
CORROSION SCIENCE (2008)
Chloride threshold for rebar corrosion in concrete with addition of silica fume
Marco Manera et al.
CORROSION SCIENCE (2008)
Evaluation of embeddable potential sensor for corrosion monitoring in concrete structures
S. Muralidharan et al.
ELECTROCHIMICA ACTA (2008)
Optical sensors for corrosion systems: I. Oxygen sensing
Francis Guillaume et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2008)
Probabilistic evaluation of initiation time of chloride-induced corrosion
Dimitri V. Val et al.
RELIABILITY ENGINEERING & SYSTEM SAFETY (2008)
Development of a wireless stress/strain measurement system integrated with pressure-sensitive nickel powder-filled cement-based sensors
B. G. Han et al.
SENSORS AND ACTUATORS A-PHYSICAL (2008)
Fibre Bragg gratings in structural health monitoring - Present status and applications
Mousumi Majumder et al.
SENSORS AND ACTUATORS A-PHYSICAL (2008)
Electrochemical studies on the performance characteristics of alkaline solid embeddable sensor for concrete environments
S. Muralidharan et al.
SENSORS AND ACTUATORS B-CHEMICAL (2008)
Steel corrosion and service life of reinforced concrete structures
Luca Bertolini
STRUCTURE AND INFRASTRUCTURE ENGINEERING (2008)
Determination of diffusion coefficient of chloride in concrete: an electrochemical impedance spectroscopic approach
R. Vedalakshmi et al.
MATERIALS AND STRUCTURES (2008)
Chloride threshold level for corrosion of steel in concrete
Ki Yong Ann et al.
CORROSION SCIENCE (2007)
Monitoring of steel corrosion in concrete by electrode arrays and electrical resistance probes
A. Legat
ELECTROCHIMICA ACTA (2007)
The influence of binder type, cracking and cover on corrosion rates of steel in chloride-contaminated concrete
A. Scott et al.
MAGAZINE OF CONCRETE RESEARCH (2007)
Spatial time-dependent reliability analysis of corrosion damage and the timing of first repair for RC structures
Mark G. Stewart et al.
ENGINEERING STRUCTURES (2007)
A promising potential embeddable sensor for corrosion monitoring application in concrete structures
Srinivasan Muralidharan et al.
MEASUREMENT (2007)
Influence of cement type and temperature on the rate of corrosion of steel in concrete exposed to carbonation
M. A. Baccay et al.
CORROSION (2006)
Corrosion monitoring of steel in concrete by galvanostatic pulse technique
S. Sathiyanarayanan et al.
CEMENT & CONCRETE COMPOSITES (2006)
EIS study of passivation of austenitic and duplex stainless steels reinforcements in simulated pore solutions
G Blanco et al.
CEMENT & CONCRETE COMPOSITES (2006)
Electrochemical studies on the solid embeddable reference sensors for corrosion monitoring in concrete structure
S Muralidharan et al.
MATERIALS LETTERS (2006)
Multiprobe chloride sensor for in situ monitoring of reinforced concrete structures
MF Montemor et al.
CEMENT & CONCRETE COMPOSITES (2006)
Sensor for oxygen evaluation in concrete
MJ Correia et al.
CEMENT & CONCRETE COMPOSITES (2006)
Electrochemical studies on the performance characteristics of solid metal-metal oxide reference sensor for concrete environments
S Muralidharan et al.
SENSORS AND ACTUATORS B-CHEMICAL (2006)
Tafel slopes and corrosion rates obtained in the pre-Tafel region of polarization curves
F Mansfeld
CORROSION SCIENCE (2005)
Studies of the corrosion of mild steel in alkali-activated slag cement mortars with sodium chloride admixtures by a galvanostatic pulse method
M Holloway et al.
CORROSION SCIENCE (2005)
Evaluation of corrosion rate from polarisation curves not exhibiting a Tafel region
HJ Flitt et al.
CORROSION SCIENCE (2005)
Corrosion rate of steel in concrete - Measurements beyond the Tafel law
B Elsener
CORROSION SCIENCE (2005)
Theoretical considerations on the supposed linear relationship between concrete resistivity and corrosion rate of steel reinforcement
J Gulikers
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2005)
Modelling of the steel-concrete interface to obtain information on reinforcement bar corrosion
V Feliu et al.
JOURNAL OF APPLIED ELECTROCHEMISTRY (2005)
Corrosion performance of conventional (ASTM A615) and low-alloy (ASTM A706) reinforcing bars embedded in concrete and exposed to chloride environments
D Trejo et al.
CEMENT AND CONCRETE RESEARCH (2005)
Development of a galvanic sensor system for detecting the corrosion damage of the steel embedded in concrete structure Part 2. Laboratory electrochemical testing of sensors in concrete
ZT Park et al.
CEMENT AND CONCRETE RESEARCH (2005)
Silver/silver chloride and mercury/mercurous sulfate standards electrodes confiability
T Villela et al.
CORROSION (2004)
Recent applications of fiber optic sensors to health monitoring in civil engineering
HN Li et al.
ENGINEERING STRUCTURES (2004)
Potentiostatic determination of chloride threshold values for rebar depassivation - Experimental and statistical study
D Izquierdo et al.
ELECTROCHIMICA ACTA (2004)
Sensor systems for use in reinforced concrete structures
WJ McCarter et al.
CONSTRUCTION AND BUILDING MATERIALS (2004)
Test methods for on-site corrosion rate measurement of steel reinforcement in concrete by means of the polarization resistance method
C Andrade et al.
MATERIALS AND STRUCTURES (2004)
On the electrochemical response and interfacial properties of steel-Ca(OH)2 and the steel-concrete system measured using galvanostatic pulses
N Birbilis et al.
ELECTROCHIMICA ACTA (2004)
Transient response analysis of steel in concrete
N Birbilis et al.
CORROSION SCIENCE (2003)
Half-cell potential measurements - Potential mapping on reinforced concrete structures
B Elsener et al.
MATERIALS AND STRUCTURES (2003)
Reinforcement corrosion in concrete structures, its monitoring and service life prediction - a review
S Ahmad
CEMENT & CONCRETE COMPOSITES (2003)
Chloride threshold dependence of pitting potential of reinforcements
C Alonso et al.
ELECTROCHIMICA ACTA (2002)
Reliability analysis of chloride penetration in saturated concrete
JS Kong et al.
PROBABILISTIC ENGINEERING MECHANICS (2002)
Chloride corrosion threshold of reinforcing steel in alkaline solutions -: Cyclic polarization behavior
L Li et al.
CORROSION (2002)
The use of permanent corrosion monitoring in new and existing reinforced concrete structures
JP Broomfield et al.
CEMENT & CONCRETE COMPOSITES (2002)
Macrocell corrosion of steel in concrete - implications for corrosion monitoring
B Elsener
CEMENT & CONCRETE COMPOSITES (2002)
Corrosion of reinforcing steel evaluated by means of concrete resistivity measurements
W Morris et al.
CORROSION SCIENCE (2002)
Test methods for on site measurement of resistivity of concrete - a RILEM TC-154 technical recommendation
RB Polder
CONSTRUCTION AND BUILDING MATERIALS (2001)
Resistance to corrosion of galvanized steel covered with an epoxy-polyamide primer coating
S González et al.
PROGRESS IN ORGANIC COATINGS (2001)
Chloride corrosion threshold of reinforcing steel in alkaline solutions - Open-circuit immersion tests
L Li et al.
CORROSION (2001)
Chloride threshold values to depassivate reinforcing bars embedded in a standardized OPC mortar
C Alonso et al.
CEMENT AND CONCRETE RESEARCH (2000)
An algorithm of galvanostatic pulse method to determine the corrosion status of reinforcement in concrete
C Lu et al.
CORROSION SCIENCE (2000)
Utilisation of electrical resistance method for the evaluation of the state of steel reinforcement in concrete and the rate of its corrosion
V Zivica
CONSTRUCTION AND BUILDING MATERIALS (2000)
分享论文
