相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Three dimensional printing of carbon/carbon composites by selective laser sintering
Xu Yi et al.
CARBON (2016)
Rapid and Automated Measurement of Milk Adulteration Using a 3D Printed Optofluidic Microviscometer (OMV)
Pedinti Sankaran Venkateswaran et al.
IEEE SENSORS JOURNAL (2016)
3D printing in pharmaceutics: A new tool for designing customized drug delivery systems
Goole Jonathan et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2016)
3d printing technologies applied for food design: Status and prospects
Fernanda C. Godoi et al.
JOURNAL OF FOOD ENGINEERING (2016)
From Design for Manufacturing (DFM) to Manufacturing for Design (MFD) via Hybrid Manufacturing and Smart Factory: A Review and Perspective of Paradigm Shift
Won-Shik Chu et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2016)
Trends and Research Challenges in Remanufacturing
Mitsutaka Matsumoto et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2016)
Smart Manufacturing: Past Research, Present Findings, and Future Directions
Hyoung Seok Kang et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2016)
Selective laser melting of stainless steel 316L with low porosity and high build rates
Zhongji Sun et al.
MATERIALS & DESIGN (2016)
3-D printed composite microfluidic pump for wearable biomedical applications
D. J. Thomas et al.
ADDITIVE MANUFACTURING (2016)
3D printing of modified-release aminosalicylate (4-ASA and 5-ASA) tablets
Alvaro Goyanes et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2015)
Computational Analysis of a Microfluidic Viscometer and Its Application in the Rapid and Automated Measurement of Biodiesel Blending Under Pressure Driven Flow
P. S. Venkateswaran et al.
JOURNAL OF COMPUTATIONAL AND THEORETICAL NANOSCIENCE (2015)
3D printing by fused deposition modeling (FDM) of a swellable/erodible capsular device for oral pulsatile release of drugs
Alice Melocchi et al.
JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY (2015)
Measurement of environmental aspect of 3-D printing process using soft computing methods
A. Garg et al.
MEASUREMENT (2015)
A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties
E. O. Olakanmi et al.
PROGRESS IN MATERIALS SCIENCE (2015)
Comparing environmental impacts of additive manufacturing vs traditional machining via life-cycle assessment
Jeremy Faludi et al.
RAPID PROTOTYPING JOURNAL (2015)
Recent advances in 3D printing of biomaterials
Helena N. Chia et al.
JOURNAL OF BIOLOGICAL ENGINEERING (2015)
Design for additive manufacturing in customized products
Hyunwoong Ko et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2015)
Combined 3D Printing Technologies and Material for Fabrication of Tactile Sensors
Morteza Vatani et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2015)
3-Dimensional Circuit Device Fabrication Process using Stereolithography and Direct Writing
Sung Hyun Jang et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2015)
A review on 3D printed bioimplants
Chee Meng Benjamin Ho et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2015)
A global sustainability perspective on 3D printing technologies
Malte Gebler et al.
ENERGY POLICY (2014)
Fused-filament 3D printing (3DP) for fabrication of tablets
Alvaro Goyanes et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2014)
Life cycle analysis of distributed recycling of post-consumer high density polyethylene for 3-D printing filament
M. A. Kreiger et al.
JOURNAL OF CLEANER PRODUCTION (2014)
PDMS lab-on-a-chip fabrication using 3D printed templates
German Comina et al.
LAB ON A CHIP (2014)
3D printed microfluidic devices with integrated versatile and reusable electrodes
Jayda L. Erkal et al.
LAB ON A CHIP (2014)
Characterization of 3D-printed microfluidic chip interconnects with integrated O-rings
O. H. Paydar et al.
SENSORS AND ACTUATORS A-PHYSICAL (2014)
3D printed modules for integrated microfluidic devices
Kyoung G. Lee et al.
RSC ADVANCES (2014)
Direct selective laser sintering/melting of high density alumina powder layers at elevated temperatures
J. Deckers et al.
8TH INTERNATIONAL CONFERENCE ON LASER ASSISTED NET SHAPE ENGINEERING (LANE 2014) (2014)
Multiphysics modeling and simulation of selective laser sintering manufacturing processes
Rishi Ganeriwala et al.
6TH CIRP INTERNATIONAL CONFERENCE ON HIGH PERFORMANCE CUTTING (HPC2014) (2014)
3D Printing of Interdigitated Li-Ion Microbattery Architectures
Ke Sun et al.
ADVANCED MATERIALS (2013)
A 3D Printed Fluidic Device that Enables Integrated Features
Kari B. Anderson et al.
ANALYTICAL CHEMISTRY (2013)
3D-printed devices for continuous-flow organic chemistry
Vincenza Dragone et al.
BEILSTEIN JOURNAL OF ORGANIC CHEMISTRY (2013)
Combining 3D printing and liquid handling to produce user-friendly reactionware for chemical synthesis and purification
Philip J. Kitson et al.
CHEMICAL SCIENCE (2013)
Continuous parallel ESI-MS analysis of reactions carried out in a bespoke 3D printed device
Jennifer S. Mathieson et al.
BEILSTEIN JOURNAL OF NANOTECHNOLOGY (2013)
Integrating stereolithography and direct print technologies for 3D structural electronics fabrication
Amit Joe Lopes et al.
RAPID PROTOTYPING JOURNAL (2012)
Multi-material, multi-technology stereolithography This feature article covers a decade of research into tackling one of the major challenges of the stereolithography technique, which is including multiple materials in one construct
Ryan B. Wicker et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2012)
Smart Soft Composite: An Integrated 3D Soft Morphing Structure Using Bend-Twist Coupling of Anisotropic Materials
Sung-Hoon Ahn et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2012)
Let there be chip-towards rapid prototyping of microfluidic devices: one-step manufacturing processes
Ansgar Waldbaur et al.
ANALYTICAL METHODS (2011)
Environmental comparison of MESO-CLAD® process and conventional machining implementing life cycle assessment
Nicolas Serres et al.
JOURNAL OF CLEANER PRODUCTION (2011)
Comparison of density measurement techniques for additive manufactured metallic parts
A. B. Spierings et al.
RAPID PROTOTYPING JOURNAL (2011)
Fabrication of Versatile Channel Flow Cells for Quantitative Electroanalysis Using Prototyping
Michael E. Snowden et al.
ANALYTICAL CHEMISTRY (2010)
A review on stereolithography and its applications in biomedical engineering
Ferry P. W. Melchels et al.
BIOMATERIALS (2010)
Direct metal printing of 3D electrical circuit using rapid prototyping
Min-Saeng Kim et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2009)
Review of manufacturing processes for soft biomimetic robots
Kyu-Jin Cho et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2009)
Microstructure and mechanical behavior of Ti-6Al-4V produced by rapid-layer manufacturing, for biomedical applications
L. E. Murr et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2009)
MINIATURIZATION Chemistry at the crossroads
Andrew J. deMello et al.
NATURE CHEMISTRY (2009)
Three-dimensional printing of porous ceramic scaffolds for bone tissue engineering
H Seitz et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2005)
Binding mechanisms in selective laser sintering and selective laser melting
JP Kruth et al.
RAPID PROTOTYPING JOURNAL (2005)
Cementless implant fixation - toward improved reliability
RM Pilliar
ORTHOPEDIC CLINICS OF NORTH AMERICA (2005)
Selective laser sintering: A qualitative and objective approach
S Kumar
JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY (2003)
Flexible organic circuits with printed gate electrodes
U Zschieschang et al.
ADVANCED MATERIALS (2003)
Chaotic mixing in three-dimensional microvascular networks fabricated by direct-write assembly
D Therriault et al.
NATURE MATERIALS (2003)
Lasers and materials in selective laser sintering
JP Kruth et al.
ASSEMBLY AUTOMATION (2003)
Rapid prototyping or rapid production? 3D printing processes move industry towards the latter
D Bak
ASSEMBLY AUTOMATION (2003)
The design of conformal cooling channels in injection molding tooling
XR Xu et al.
POLYMER ENGINEERING AND SCIENCE (2001)
Monolithic microfabricated valves and pumps by multilayer soft lithography
MA Unger et al.
SCIENCE (2000)
Selective laser sintering of gas atomized M2 high speed steel powder
HJ Niu et al.
JOURNAL OF MATERIALS SCIENCE (2000)