相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Study of Peck drilling of borosilicate glass with μRUM process for MEMS
Anil Kumar Jain et al.
JOURNAL OF MANUFACTURING PROCESSES (2016)
Lab-on-a-chip devices: How to close and plug the lab?
Yuksel Temiz et al.
MICROELECTRONIC ENGINEERING (2015)
Hybrid micro-machining processes: A review
Saeed Zare Chavoshi et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2015)
Rapid micromachining of high aspect ratio holes in fused silica glass by high repetition rate picosecond laser
Samira Karimelahi et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2014)
Hybrid processes in manufacturing
Bert Lauwers et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2014)
Abrasive slurry jet micro-machining of holes in brittle and ductile materials
K. Kowsari et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)
Energy: the microfluidic frontier
David Sinton
LAB ON A CHIP (2014)
A Review on Current Research Aspects in Tool-Based Micromachining Processes
S. P. Leo Kumar et al.
MATERIALS AND MANUFACTURING PROCESSES (2014)
Micro-hole drilling and cutting using femtosecond fiber laser
Huan Huang et al.
OPTICAL ENGINEERING (2014)
Study of the effects of tool longitudinal oscillation on the machining speed of electrochemical discharge drilling of glass
Mohammad Reza Razfar et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2014)
Drilling of microholes down to 10 μm in diameter using ultrasonic grinding
Kai Egashira et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2014)
Surface evolution models for abrasive slurry jet micro-machining of channels and holes in glass
H. Nouraei et al.
WEAR (2014)
Fabrication and simulation of glass micromachining using CO2 laser processing with PDMS protection
C. K. Chung et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2013)
Laser-induced plasma micro-machining (LIPMM) for enhanced productivity and flexibility in laser-based micro-machining processes
Rajiv Malhotra et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2013)
Forces exerted on the tool-electrode during constant-feed glass micro-drilling by spark assisted chemical engraving
Jana D. Abou Ziki et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2013)
Enhancing Micro-EDM using Ultrasonic Vibration and Approaches for Machining of Nonconducting Ceramics
Andreas Schubert et al.
STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING (2013)
High aspect ratio micromachining of glass by electrochemical discharge machining (ECDM)
Sumit K. Jui et al.
JOURNAL OF MANUFACTURING PROCESSES (2013)
Tool type and hole diameter influence in deep ultrasonic drilling of micro-holes in glass
A. Schorderet et al.
PROCEEDINGS OF THE SEVENTEENTH CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING (ISEM) (2013)
A practical guide for the fabrication of microfluidic devices using glass and silicon
Ciprian Iliescu et al.
BIOMICROFLUIDICS (2012)
Ultradeep fused silica glass etching with an HF-resistant photosensitive resist for optical imaging applications
John M. Nagarah et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2012)
Making Microholes in Glass by Electrochemical Local Acidification of Fluoride-Containing Solution
Tomohiko Sugita et al.
ECS JOURNAL OF SOLID STATE SCIENCE AND TECHNOLOGY (2012)
Advances in CO2-Laser Drilling of Glass Substrates
Lars Brusberg et al.
LASER ASSISTED NET SHAPE ENGINEERING 7 (LANE 2012) (2012)
Performance of Micro-hole Drilling by Ultrasonic-assisted Electro-Chemical Discharge Machining
Meifal Rusli et al.
MATERIALS AND MANUFACTURING TECHNOLOGIES XIV (2012)
Sub-wavelength micromachining of silica glass by irradiation of CO2 laser with Fresnel diffraction
K. Okazaki et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2011)
Enhancement of ECDM efficiency and accuracy by spherical tool electrode
Cheng-Kuang Yang et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2011)
Development of a grinding-drilling technique for holing optical grade glass
Shun-Tong Chen et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2011)
Ultrasonic-assisted machining of stone
U. Heisel et al.
PRODUCTION ENGINEERING-RESEARCH AND DEVELOPMENT (2011)
CO2 laser micromachined crackless through holes of Pyrex 7740 glass
C. K. Chung et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2010)
Study of gas film quality in electrochemical discharge machining
Chih-Ping Cheng et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2010)
Magnetic field-assisted electrochemical discharge machining
Chih-Ping Cheng et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2010)
Micro structuring of inorganic glass by hot embossing of coated glass wafers
Jan Edelmann et al.
MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2010)
Manufacture of microfluidic glass chips by deep plasma etching, femtosecond laser ablation, and anodic bonding
S. Queste et al.
MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2010)
Geometric improvement of electrochemical discharge micro-drilling using an ultrasonic-vibrated electrolyte
Min-Seop Han et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2009)
Fabrication of microfluidic mixers with varying topography in glass using the powder-blasting process
Abdeljalil Sayah et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2009)
Micro-structuring of glass with features less than 100 μm by electrochemical discharge machining
Xuan Doan Cao et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2009)
Laser beam machining - A review
Avanish Kumar Dubey et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2008)
Near-field enhanced femtosecond laser nano-drilling of glass substrate
Y. Zhou et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2008)
Fabrication and characterization of a wafer-level MEMS vacuum package with vertical feedthroughs
Junseok Chae et al.
JOURNAL OF MICROELECTROMECHANICAL SYSTEMS (2008)
Improving the machining efficiency in electrochemical discharge machining (ECDM) microhole drilling by offset pulse voltage
Zhi-Ping Zheng et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2008)
Deep plasma etching of glass for fluidic devices with different mask materials
Kai Kolari et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2008)
Modeling gas film formation in electrochemical discharge machining processes using a side-insulated electrode
Min-Seop Han et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2008)
Review of vibration-assisted machining
D. E. Brehl et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2008)
Deep plasma etching of glass with a silicon shadow mask
K. Kolari
SENSORS AND ACTUATORS A-PHYSICAL (2008)
On the wet etching of Pyrex glass
Ciprian Iliescu et al.
SENSORS AND ACTUATORS A-PHYSICAL (2008)
Micro-hole fabricated inside FOTURAN glass using femtosecond laser writing and chemical etching
Yinzhong Wu et al.
OPTICAL AND QUANTUM ELECTRONICS (2007)
Surface evolution models for abrasive jet micromachining of holes in glass and polymethylmethacrylate (PMMA)
A. Ghobeity et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2007)
Recent developments on microablation of glass materials using excimer lasers
Ampere A. Tseng et al.
OPTICS AND LASERS IN ENGINEERING (2007)
Chemical-assisted ultrasonic machining of glass
J. P. Choi et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2007)
Geometrical characterization of micro-holes drilled in glass by gravity-feed with spark assisted chemical engraving (SACE)
P. Maillard et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2007)
ArF excimer laser micromachining of Pyrex, SiC and PZT for rapid prototyping of MEMS components
Jean-Philippe Desbiens et al.
SENSORS AND ACTUATORS A-PHYSICAL (2007)
3D microstructuring of Pyrex glass using the electrochemical discharge machining process
Zhi-Ping Zheng et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2007)
Deep microstructuring in glass for microfluidic applications
Chantal Khan Malek et al.
MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2007)
Strategies in deep wet etching of Pyrex glass
Ciprian Iliescu et al.
SENSORS AND ACTUATORS A-PHYSICAL (2007)
The tool geometrical shape and pulse-off time of pulse voltage effects in a Pyrex glass electrochemical discharge microdrilling process
Zhi-Ping Zheng et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2007)
Electrophoretic deposition grinding (EPDG) for improving the precision of microholes drilled via ECDM
Biing-Hwa Yan et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2007)
Improving the material removal rate in spark-assisted chemical engraving (SACE) gravity-feed micro-hole drilling
R. Wuethrich et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2006)
Voltage pulse frequency and duty ratioeffects in an electrochemical discharge microdrilling process of Pyrex glass
Dae-Jin Kim et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2006)
The gas film in spark assisted chemical engraving (SACE) -: A key element for micro-machining applications
R. Wuethrich et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2006)
High speed anisotropic etching of Pyrex® for microsystems applications
Abhijat Goyal et al.
JOURNAL OF NON-CRYSTALLINE SOLIDS (2006)
Deep reactive ion etching of borosilicate glass using an anodically bonded silicon wafer as an etching mask
T. Akashi et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2006)
Parametric analysis on electrochemical discharge machining of silicon nitride ceramics
BR Sarkar et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2006)
Deep dry etching of borosilicate glass using SF6 and SF6/Ar inductively coupled plasmas
JH Park et al.
MICROELECTRONIC ENGINEERING (2005)
Characterization of masking layers for deep wet etching of glass in an improved HF/HCl solution
C Iliescu et al.
SURFACE & COATINGS TECHNOLOGY (2005)
Machining of non-conducting materials using electrochemical discharge phenomenon -: an overview
R Wüthrich et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2005)
Advances in micro ultrasonic assisted lapping of microstructures in hard-brittle materials: a brief review and outlook
C Zhang et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2005)
Investigation into micro abrasive intermittent jet machining
L Zhang et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2005)
Precision glass machining, drilling and profile cutting by short pulse lasers
S Nikumb et al.
THIN SOLID FILMS (2005)
Removable tubing interconnects for glass-based micro-fluidic systems made using ECDM
ES Lee et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2004)
A new masking technology for deep glass etching and its microfluidic application
MQ Bu et al.
SENSORS AND ACTUATORS A-PHYSICAL (2004)
Liquid-assisted femtosecond laser drilling of straight and three-dimensional microchannels in glass
DJ Hwang et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2004)
Micromachining of silicon by short-pulse laser ablation in air and under water
KL Choo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Macro-to-micro interfaces for microfluidic devices
CK Fredrickson et al.
LAB ON A CHIP (2004)
Ultraprecision diamond turning of glass with ultrasonic vibration
J Gan et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2003)
Plasma applications for biochip technology
T Ichiki et al.
THIN SOLID FILMS (2003)
Fabrication of high-density electrical feed-throughs by deep-reactive-ion etching of Pyrex glass
XG Li et al.
JOURNAL OF MICROELECTROMECHANICAL SYSTEMS (2002)
Study of precision micro-holes in borosilicate glass using micro EDM combined with micro ultrasonic vibration machining
BH Yan et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2002)
Prevention of exit crack in mirco drilling of soda-lime glass
BJ Park et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2002)
Ultrasonic vibration drilling of microholes in glass
K Egashira et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2002)
Microstructured glass chip for ion-channel electrophysiology
N Fertig et al.
PHYSICAL REVIEW E (2001)
Powder blasting for the realisation of microchips for bio-analytic applications
D Solignac et al.
SENSORS AND ACTUATORS A-PHYSICAL (2001)
Oblique powder blasting for three-dimensional micromachining of brittle materials
E Belloy et al.
SENSORS AND ACTUATORS A-PHYSICAL (2001)
Powder-blasting technology as an alternative tool for microfabrication of capillary electrophoresis chips with integrated conductivity sensors
S Schlautmann et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2001)
Energy deposition at front and rear surfaces during picosecond laser interaction with fused silica
A Salleo et al.
APPLIED PHYSICS LETTERS (2001)
Deep reactive ion etching of Pyrex glass using SF6 plasma
XH Li et al.
SENSORS AND ACTUATORS A-PHYSICAL (2001)
Drilling of glass by excimer laser mask projection technique
B Keiper et al.
JOURNAL OF LASER APPLICATIONS (2000)