相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Reducing the effciency-stability-cost gap of organic photovoltaics with highly effcient and stable small molecule acceptor ternary solar cells
Derya Baran et al.
NATURE MATERIALS (2017)
Using o-Chlorobenzaldehyde as a Fast Removable Solvent Additive during Spin-Coating PTB7-Based Active Layers: High Efficiency Thick-Film Polymer Solar Cells
Jinxiang Chen et al.
ADVANCED ENERGY MATERIALS (2017)
Ternary solar cells with a mixed face-on and edge-on orientation enable an unprecedented efficiency of 12.1%
Tanya Kumari et al.
ENERGY & ENVIRONMENTAL SCIENCE (2017)
Fused Nonacyclic Electron Acceptors for Efficient Polymer Solar Cells
Shuixing Dai et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)
Highly Efficient Organic Solar Cells with Improved Vertical Donor-Acceptor Compositional Gradient Via an Inverted Off-Center Spinning Method
Jiang Huang et al.
ADVANCED MATERIALS (2016)
All-Polymer Solar Cells Based on Absorption-Complementary Polymer Donor and Acceptor with High Power Conversion Efficiency of 8.27%
Liang Gao et al.
ADVANCED MATERIALS (2016)
High-Performance Solution-Processed Non-Fullerene Organic Solar Cells Based on Selenophene-Containing Perylene Bisimide Acceptor
Dong Meng et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)
Combinatorial Study of Temperature-Dependent Nanostructure and Electrical Conduction of Polymer Semiconductors: Even Bimodal Orientation Can Enhance 3D Charge Transport
Sangsik Park et al.
ADVANCED FUNCTIONAL MATERIALS (2016)
A Novel Naphtho[1,2-c:5,6-c′]Bis([1,2,5] Thiadiazole)-Based Narrow-Bandgap π-Conjugated Polymer with Power Conversion Efficiency Over 10%
Yaocheng Jin et al.
ADVANCED MATERIALS (2016)
Aqueous Solution Processed Photoconductive Cathode Interlayer for High Performance Polymer Solar Cells with Thick Interlayer and Thick Active Layer
Li Nian et al.
ADVANCED MATERIALS (2016)
Energy-Level Modulation of Small-Molecule Electron Acceptors to Achieve over 12% Efficiency in Polymer Solar Cells
Sunsun Li et al.
ADVANCED MATERIALS (2016)
Side-Chain Isomerization on an n-type Organic Semiconductor ITIC Acceptor Makes 11.77% High Efficiency Polymer Solar Cells
Yankang Yang et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)
Conjugated Donor-Acceptor Polymers Entailing Pechmann Dye-Derived Acceptor with Siloxane-Terminated Side Chains Exhibiting Balanced Ambipolar Semiconducting Behavior
Si-Fen Yang et al.
MACROMOLECULES (2016)
Structure-Property Relationships Directing Transport and Charge Separation in Isoindigo Polymers
Caroline Grand et al.
MACROMOLECULES (2016)
A Wide Bandgap Polymer with Strong π-π Interaction for Efficient Fullerene-Free Polymer Solar Cells
Huifeng Yao et al.
ADVANCED ENERGY MATERIALS (2016)
Efficient organic solar cells processed from hydrocarbon solvents
Jingbo Zhao et al.
NATURE ENERGY (2016)
Donor-acceptor conjugated polymers based on multifused ladder-type arenes for organic solar cells
Jhong-Sian Wu et al.
CHEMICAL SOCIETY REVIEWS (2015)
Photoconductive Cathode Inter layer for Highly Efficient Inverted Polymer Solar Cells
Li Nian et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)
A Balanced Face-On to Edge-On Texture Ratio in Naphthalene Diimide-Based Polymers with Hybrid Siloxane Chains Directs Highly Efficient Electron Transport
Yiho Kim et al.
MACROMOLECULES (2015)
Replacing Alkyl with Oligo(ethylene glycol) as Side Chains of Conjugated Polymers for Close π-π Stacking
Bin Meng et al.
MACROMOLECULES (2015)
Thiophene-Thiazolothiazole Copolymers: Significant Impact of Side Chain Composition on Backbone Orientation and Solar Cell Performances
Itaru Osaka et al.
ADVANCED MATERIALS (2014)
25th Anniversary Article: Bulk Heterojunction Solar Cells: Understanding the Mechanism of Operation
Alan J. Heeger
ADVANCED MATERIALS (2014)
Low Band-Gap Conjugated Polymers with Strong Interchain Aggregation and Very High Hole Mobility Towards Highly Effi cient Thick- Film Polymer Solar Cells
Zhenhui Chen et al.
ADVANCED MATERIALS (2014)
High-Mobility Field-Effect Transistors Fabricated with Macroscopic Aligned Semiconducting Polymers
Hsin-Rong Tseng et al.
ADVANCED MATERIALS (2014)
Naphtho[1,2-b:5,6-b′]dithiophene Based Two-Dimensional Conjugated Polymers for Highly Efficient Thick-Film Inverted Polymer Solar Cells
Xiangwei Zhu et al.
CHEMISTRY OF MATERIALS (2014)
Cost analysis of roll-to-roll fabricated ITO free single and tandem organic solar modules based on data from manufacture
Florian Machui et al.
ENERGY & ENVIRONMENTAL SCIENCE (2014)
A New Tetracyclic Lactam Building Block for Thick, Broad-Bandgap Photovoltaics
Renee Kroon et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)
A Thienoisoindigo-Naphthalene Polymer with Ultrahigh Mobility of 14.4 cm2/V.s That Substantially Exceeds Benchmark Values for Amorphous Silicon Semiconductors
Gyoungsik Kim et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)
High-Efficiency Inverted Polymer Photovoltaics via Spectrally Tuned Absorption Enhancement
Stephen Loser et al.
ADVANCED ENERGY MATERIALS (2014)
High-Performance Inverted Organic Photovoltaics with Over 1-μm Thick Active Layers
Xiaowen Hu et al.
ADVANCED ENERGY MATERIALS (2014)
Efficient Small Bandgap Polymer Solar Cells with High Fill Factors for 300 nm Thick Films
Weiwei Li et al.
ADVANCED MATERIALS (2013)
Comparison of the Photovoltaic Characteristics and Nanostructure of Fullerenes Blended with Conjugated Polymers with Siloxane-Terminated and Branched Aliphatic Side Chains
Do Hwan Kim et al.
CHEMISTRY OF MATERIALS (2013)
Optimization of polymer photovoltaic cells with bulk heterojunction layers hundreds of nanometers thick: modifying the morphology and cathode interface
Hui Joon Park et al.
ENERGY & ENVIRONMENTAL SCIENCE (2013)
Boosting the Ambipolar Performance of Solution-Processable Polymer Semiconductors via Hybrid Side-Chain Engineering
Junghoon Lee et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2013)
Record High Hole Mobility in Polymer Semiconductors via Side-Chain Engineering
Il Kang et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2013)
Naphthodithiophene-Naphthobisthiadiazole Copolymers for Solar Cells: Alkylation Drives the Polymer Backbone Flat and Promotes Efficiency
Itaru Osaka et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2013)
Organic photovoltaics with thick active layers (∼800 nm) using a high mobility polymer donor
Leanne Murphy et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2013)
Loss Mechanisms in Thick-Film Low-Bandgap Polymer Solar Cells
Cephas E. Small et al.
ADVANCED ENERGY MATERIALS (2013)
Overcoming efficiency challenges in organic solar cells: rational development of conjugated polymers
Hae Jung Son et al.
ENERGY & ENVIRONMENTAL SCIENCE (2012)
Solution-Processable Ambipolar Diketopyrrolopyrrole-Selenophene Polymer with Unprecedentedly High Hole and Electron Mobilities
Junghoon Lee et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2012)
Rational Design of High Performance Conjugated Polymers for Organic Solar Cells
Huaxing Zhou et al.
MACROMOLECULES (2012)
A simple droplet pinning method for polymer film deposition for measuring charge transport in a thin film transistor
Hanying Li et al.
ORGANIC ELECTRONICS (2012)
Bulk heterojunction solar cells with thick active layers and high fill factors enabled by a bithiophene-co-thiazolothiazole push-pull copolymer
J. Peet et al.
APPLIED PHYSICS LETTERS (2011)
π-Conjugated Polymers for Organic Electronics and Photovoltaic Cell Applications
Antonio Facchetti
CHEMISTRY OF MATERIALS (2011)
Fluorine Substituted Conjugated Polymer of Medium Band Gap Yields 7% Efficiency in Polymer-Fullerene Solar Cells
Samuel C. Price et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2011)
Siloxane-Terminated Solubilizing Side Chains: Bringing Conjugated Polymer Backbones Closer and Boosting Hole Mobilities in Thin-Film Transistors
Jianguo Mei et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2011)
An Easily Synthesized Blue Polymer for High-Performance Polymer Solar Cells
Ergang Wang et al.
ADVANCED MATERIALS (2010)
Effects of active layer thickness and thermal annealing on polythiophene: Fullerene bulk heterojunction photovoltaic devices
Lichang Zeng et al.
APPLIED PHYSICS LETTERS (2010)
Business, market and intellectual property analysis of polymer solar cells
Torben D. Nielsen et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2010)
Development of Novel Conjugated Donor Polymers for High-Efficiency Bulk-Heterojunction Photovoltaic Devices
Junwu Chen et al.
ACCOUNTS OF CHEMICAL RESEARCH (2009)
Polymer-Fullerene Bulk-Heterojunction Solar Cells
Gilles Dennler et al.
ADVANCED MATERIALS (2009)
Synthesis of Conjugated Polymers for Organic Solar Cell Applications
Yen-Ju Cheng et al.
CHEMICAL REVIEWS (2009)
Narrow-bandgap diketo-pyrrolo-pyrrole polymer solar cells: The effect of processing on the performance
Martijn M. Wienk et al.
ADVANCED MATERIALS (2008)
Synthesis, Characterization, and Photovoltaic Properties of a Low Band Gap Polymer Based on Silole-Containing Polythiophenes and 2,1,3-Benzothiadiazole
Jianhui Hou et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2008)
A low-bandgap poly(2,7-carbazole) derivative for use in high-performance solar cells
Nicolas Blouin et al.
ADVANCED MATERIALS (2007)
Modeling optical effects and thickness dependent current in polymer bulk-heterojunction solar cells
Douglas W. Sievers et al.
JOURNAL OF APPLIED PHYSICS (2006)