Electrocatalytic Cobalt Nanoparticles Interacting with Nitrogen-Doped Carbon Nanotube in Situ Generated from a Metal-Organic Framework for the Oxygen Reduction Reaction

A metal organic framework (MOP), synthesized from cobalt salt, melamine (mela), and 1,4-dicarboxybezene (BDC), was used as precursor to prepare Co/CoNx/N-CNT/C electrocatalyst via heat treatment at different temperature (700-900 degrees C) under nitrogen atmosphere. Crystallites size and microstrain in the 800 degrees C heat-treated sample (MOFs-800) were the lowest, whereas the stacking fault value was the highest among the rest of the homemade samples, as attested to by the Williamson-Hall analysis, hence assessing that the structural or/and surface modification of Co nanoparticles (NPs), found in MOFs-800, was different from that in other samples. CNTs in MOFs-800, interacting with Co NPs, were formed on the surface of the support, keeping the hexagonal shape of the initial MOF. Among the three homemade samples, the IMF-800 sample, with the best electrocatalytic performance toward oxygen reduction reaction (ORR) in 0.1 M KOH solution, showed the highest density of CNTs skin on the support, the lowest I-D/I-G ratio, and the largest N atomic content in form of pyridinic-N, CoNx, pyrrolic-N, graphitic-N, and oxidized-N species. Based an the binding energy shift toward lower energies, a strong interaction between the active site and the support was identified for MOFs-800 sample. The number of electron transfer was 3.8 on MOFs-800, close to the value of 4.0 determined on the Pt/C benchmark, thus implying a fast and efficient multielectron reduction of molecular oxygen on CoNx active sites. In addition, the chronoamperometric response within 24 000 s showed a more stable current density at 0.69 V/RHE on MOFs-800 as compared with that,of Pt/C.