4.7 Article

Effect of temperature on static and low velocity impact properties of thermoplastic composites

期刊

COMPOSITES PART B-ENGINEERING
卷 113, 期 -, 页码 100-110

出版社

ELSEVIER SCI LTD
DOI: 10.1016/j.compositesb.2017.01.010

关键词

Thermoplastic resin; Polymer-matrix composites (PMCs); High-temperature properties; Impact behaviour

资金

  1. MIUR Ministry (Italy) within the TECOP project [PON02_00029_3206010]

向作者/读者索取更多资源

In this work, thermoplastic composites based on poly(ethylene 2,6-naphthalate) (PEN) have been investigated with the aim to elucidate the effect of temperature on static and impact properties. The matrix was reinforced with four different high performing woven fabrics based on carbon, Twaron, Vectran, basalt fibres. Composites were manufactured by using the film stacking technique, alternating layers of balanced plain weave fabrics (0/90) and films of amorphous PEN, keeping the fibre volume fraction around 40%. The compression moulding process was optimized to obtain optimal fabric impregnation and to keep the void content lower than 1%. The structural response was evaluated at 20 degrees C, 60 degrees C and 100 degrees C by means of static flexural and low velocity impact tests. Dynamic mechanical scans (DMA) were also performed to evaluate the stiffness of the laminates at temperatures ranging from -80 degrees C to 230 degrees C. The flexural modulus and strength of laminates resulted to be very high in proportion with the fibre stiffness. The flexural behaviour was affected by the temperature but a limited reduction of the stiffness (lower than 20%) was exhibited by all but PEN/Vectran up to temperatures of 100 degrees C. PEN/carbon resulted the best performing system at each testing temperature (flexural modulus equal to 38.8 GPa, flexural strength equal to 714 MPa at 20 degrees C). Results from DMA tests demonstrated a satisfactory agreement with static tests (differences within +/- 13%, except that for PEN/Vectran). The impact resistance of the composites was found to depend on the fibre type, temperature and interface strength. PEN/basalt resulted the best performing composite followed by PEN/Twaron (perforation energy at 20 degrees C: 44.3 J and 38.2 J, respectively). The PEN/carbon laminate exhibited the lowest impact performance but, unlike PEN/basalt and PEN/Vectran, the impact resistance improved with the increasing temperature. (C) 2017 Elsevier Ltd. All rights reserved.

作者

我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。

评论

主要评分

4.7
评分不足

次要评分

新颖性
-
重要性
-
科学严谨性
-
评价这篇论文

推荐

暂无数据
暂无数据